Merchandise Description
Variety: 9 inch slewing push
Attribute:
1. Tooth kind: Worm tooth
two. Medium-load slewing generate
3. CZPT kind: CZPT ulic generate
four. Diameter of rotary heart: 342mm
Other specialized information:
Module: 5
Variety of worm shafts: one
Gear Ratio: sixty one: 1
Performance: forty%
Self-locking gears: Indeed
Excess weight: 49kg
Output Torque: 8.5KNm
Backwards Holding Torque: 38.7KNm
Tilting Moment: 33.9KNm
Radial static load ranking: 135KN
Axial static load ranking: 338KN
Radial dynamic load rating: 71KN
Axial dynamic load ranking: 81KN
Detailed complex data make sure you kindly contact us straight.
Slewing travel
1. Introduction of CZPT slewing drive
Slewing CZPT is also named slewing gear, CZPT , worm push, rotary drive axle, rotary drive vice, slew generate, CZPT reducer and rotary push device. At current the vast majority of this kind of products are caller Slewing CZPT .
LYHY Slewing CZPT motion can reduce CZPT consumption, since the safety function. In addition to the field of use in the everyday photo voltaic CZPT systems are usually employed for Special car, weighty-obligation flat-panel truck, container cranes, truck mounted crane, automobile crane and aerial automobiles, cranes, gantry cranes, small wind CZPT stations, room communications, satellite receiver, and many others…The Slewing CZPT in the photo voltaic photovoltaic sector, the common configuration DC planetary reduction motor or AC geared motors Principal configuration of the hydraulic motor as a CZPT -pushed building equipment
LYHY Slewing CZPT basic principle of the huge transmission ratio of the deceleration gadget to transmit movement and CZPT among the two axes staggered in place. The Slewing CZPT transmission is usually the case of the principal factors of the worm and wheel bearings, shell, and the CZPT source
As the main ingredient of turntable bearings, can endure the axial load, radial load and overturning second.
two. Composition
Slewing generate can be divided into two various constructions as for each different programs.
Mild load slewing generate
Hefty load slewing drive
The proportions of slewing drives contain 3 inch, 5 inch, 7 inch, 9 inch, 12 inch, 14 inch, 17 inch, 21 inch and 25 inch.
three. Functions:
Slewing generate is a unique bearing. And a slewing generate normally consist of slewing bearing, worm shaft, housing, bearing, motor and so on. CZPT travel the worm shaft, the outer ring of slewing bearing will rotate, the outer ring output the torque through flange while the inner ring of slewing bearing is fastened in housing.
LYHY Slewing CZPT and rotary products, compared with the ease of installation, relieve of routine maintenance, Installation place cost savings positive aspects to a higher extent.
4. Application:
Slewing drives are commonly employed in aerospace region, solar CZPT techniques, wind turbines, satellite broadcasting method, and CZPT machinery like truck cranes, and male lifts, and so on. Not too long ago many years, it has been prosperously utilised in photovoltaic CZPT generation techniques, specific motor vehicle, weighty-responsibility flat-panel truck, container cranes, truck mounted crane, car crane and aerial vehicles, cranes, gantry cranes, small wind CZPT stations, place communications, satellite receiver, and so on.
Light-load Slewing CZPT | ||||||||||||||||||||||||||
Model | Rated output torque /KN-m | Tilting Moment torque /KN-m | Load /KN | Gear ratio | Self-locking gears | Boundary dimensions (mm) | Weight (KG) | |||||||||||||||||||
Static load rating, axial | Static load ranking,radial | Dynamic load score, axial | Dynamic load ranking,radial | L | L1 | L2 | L3 | H2 | H3 | H4 | ΦD | ΦD1 | ΦD2 | ΦD3 | ΦD4 | ΦD5 | n1-Y | n1-X | H | H1 | ||||||
three” | .two | .5 | thirty | 16.6 | 9.6 | 8.four | sixty two:1 | indeed | 346 | 153 | 114 | 80 | 14.5 | sixty.five | a hundred twenty five | a hundred | one hundred | 126 | 6-M10 | six-M10 | a hundred ninety | 109 | twelve | |||
five” | .3 | .8 | 76 | 22.6 | thirteen.eight | eleven.8 | sixty two:one | sure | 361 | 168 | 128 | 93.7 | 24.six | seven | 38 | 161 | a hundred thirty five | 103.5 | 70 | fifty | a hundred and twenty | six-M10 | seven-M10 | 219 | seventy nine | 18 |
7″ | 1 | thirteen.5 | 133 | 53 | 32 | 28 | seventy three:1 | of course | 398 | 182 | 166 | 132.seven | 23.4 | four.3 | forty two.five | 237.5 | 203.2 | 163 | one hundred twenty.six | ninety eight | a hundred forty five | 8-M12 | 10-M12 | 295 | eighty one | 23 |
nine” | seven.three | 33.9 | 338 | one hundred thirty five | 81 | 71 | 61:one | sure | 546 | 314 | 239 | 174.one | 29 | four.4 | 54.5 | 316 | 270 | 222.5 | one hundred seventy five | 145 | 204 | sixteen-M16 | 15-M16 | 411 | 108 | 50 |
twelve” | 9.two | fifty four.three | 475 | one hundred ninety | 114 | 100 | seventy eight:one | sure | 556 | 324 | 285 | 220 | 27 | 4.four | fifty eight.five | 401.five | 358 | 308.5 | 259 | 229 | 289 | eighteen-M16 | 19-M16 | 500 | 110.5 | sixty |
fourteen” | ten.5 | 67.8 | 555 | 222 | 133 | 117 | 85:1 | yes | 547 | 330 | 303 | 238 | 28 | three.5 | fifty nine | 435.five | 390 | 342.five | 295 | 265 | 325 | 18-M16 | 23-M16 | 530 | a hundred and ten | seventy three |
17″ | 14.five | one hundred thirty five.six | 975 | 390 | 235 | 205 | 102:one | indeed | 555 | 338 | 340 | 275.3 | 26 | 4.six | sixty six | 522 | 479.4 | 425.5 | 365.one | 324 | 406 | twenty-M16 | 20-M16 | 615 | 126 | a hundred and ten |
21″ | twenty.2 | 203 | 1598 | 640 | 385 | 335 | 125:1 | sure | 678 | 461 | 398 | 333 | three.3 | four.5 | 76 | 616 | 584.two | 525.five | 466.7 | 431.eight | 532 | 36-M20 | 35-M20 | 732 | 136.five | 158 |
twenty five” | 22.five | 271 | 2360 | 945 | 590 | 470 | one hundred fifty:one | Sure | 678 | 461 | 467 | 401.eight | six.2 | four.five | seventy eight.2 | 744 | 675 | 620 | 585 | 512 | 628.five | 36-M20 | 35-M20 | 863 | 133.two | 230 |
Heavy-load slewing push | ||||||||||||||||||||||||||
Model | Rated output torque /KN-m | Tilting Instant torque /KN-m | Load /KN | Gear ratio | Self-locking gears | Boundary dimensions (mm) | Weight (KG) | |||||||||||||||||||
Static load ranking, axial | Static load rating,radial | Dynamic load ranking, axial | Dynamic load rating,radial | L | L1 | L2 | L3 | H2 | H3 | H4 | ΦD | ΦD1 | ΦD2 | ΦD3 | ΦD4 | ΦD5 | n1-Y | n1-X | H | H1 | ||||||
three” | .25 | .5 | 30 | sixteen.6 | nine.six | 8.four | sixty two:1 | yes | 346 | 153 | 114 | eighty | fourteen.five | 60.5 | one hundred twenty five | a hundred | one hundred | 126 | six-M10 | six-M10 | a hundred ninety | 109 | 12 | |||
five” | .37 | .8 | seventy six | 22.6 | 13.8 | 11.8 | sixty two:one | sure | 361 | 168 | 128 | 93.7 | 24.6 | seven | 38 | 161 | a hundred thirty five | 103.5 | 70 | fifty | a hundred and twenty | six-M10 | 7-M10 | 219 | seventy nine | eighteen |
seven” | one.three | 13.5 | 133 | 53 | 32 | 28 | seventy three:1 | yes | 398 | 182 | 166 | 132.7 | 23.four | four.3 | forty two.5 | 237.five | 203.two | 163 | 120.6 | 98 | a hundred forty five | 8-M12 | ten-M12 | 295 | 81 | 23 |
9″ | nine.two | 33.9 | 338 | one hundred thirty five | eighty one | seventy one | 61:one | indeed | 546 | 314 | 239 | 174.one | 29 | four.four | 54.five | 316 | 270 | 222.5 | one hundred seventy five | one hundred forty five | 204 | sixteen-M16 | 15-M16 | 411 | 108 | 50 |
twelve” | eleven.seven | 54.3 | 475 | 190 | 114 | 100 | 78:1 | indeed | 556 | 324 | 285 | 220 | 27 | four.4 | fifty eight.5 | 401.five | 358 | 308.5 | 259 | 229 | 289 | eighteen-M16 | 19-M16 | five hundred | a hundred and ten.five | 60 |
14″ | twelve.seven | 67.eight | 555 | 222 | 133 | 117 | 85:one | yes | 547 | 330 | 303 | 238 | 28 | three.5 | 59 | 435.5 | 390 | 342.5 | 295 | 265 | 325 | eighteen-M16 | 23-M16 | 530 | one hundred ten | 73 |
17″ | 18.5 | 135.six | 975 | 390 | 235 | 205 | 102:one | sure | 555 | 338 | 340 | 275.3 | 26 | four.6 | 66 | 522 | 479.four | 425.five | 365.one | 324 | 406 | twenty-M16 | 20-M16 | 615 | 126 | one hundred ten |
21″ | 29 | 203 | 1598 | 640 | 385 | 335 | a hundred twenty five:one | of course | 678 | 461 | 398 | 333 | 3.3 | 4.five | seventy six | 616 | 584.2 | 525.5 | 466.7 | 431.eight | 532 | 36-M20 | 35-M20 | 732 | 136.five | 158 |
25″ | 34 | 271 | 2360 | 945 | 590 | 470 | a hundred and fifty:one | sure | 678 | 461 | 467 | 401.eight | six.two | four.five | seventy eight.2 | 744 | 675 | 820 | 585 | 512 | 628.5 | 36-M20 | 35-M20 | 863 | 133.2 | 230 |
Protection PROVISIONS: Worm drives need to not be employed as a locking system to safe hefty objects, which may possibly trigger injury or injury in the course of reverse action. In non-perhaps dangerous purposes, self-locking is needed to stop reverse rotation, and then a minimal-pitch single-threaded worm is used to routinely lock the worm equipment to prevent reverse rotation.