Product Description
LHD Series
LHD series’ flexspline with flanging extremely quick tube framework. Which can be used when round spline fastened, and the flexspline as finish output. It can also utilized to correct the flexspline, and the circular spline as stop output. The axial duration of LHD-I is shortened by 50%, LHD-III is shortened by 15%, with out changing product efficiency.
| CONTAST US |
LHD Rated parameters
| Model | Reduction ratio | Rated torque at 2000r/min enter | Permissible peak torque at begin and quit | Permissible maximum benefit for common load torque | Permissible maximum momentary torque | Permissible maximum input rotational velocity | Permissible average enter rotational pace | Backlash | Design lifestyle | ||||
| Grease | Grease | ||||||||||||
| Nm | kgfm | Nm | kgfm | Nm | kgfm | Nm | kgfm | r/min | r/min | Arc Sec | Hour | ||
| 14 | fifty | three.7 | .38 | twelve | one.two | four.eight | .forty nine | 24 | 2.four | 8500 | 3500 | <=20 | 7000 |
| eighty | 4.2 | .43 | sixteen | 1.6 | five.nine | .six | 31 | three.one | |||||
| one hundred | five.4 | .55 | 19 | one.nine | seven.seven | .seventy nine | 35 | three.6 | |||||
| 17 | fifty | 11 | one.1 | 23 | two.3 | eighteen | one.9 | 48 | four.9 | 7300 | 3500 | <=20 | 10000 |
| eighty | fourteen | one.four | 30 | .3 | 21 | 2.one | 58 | 5.nine | |||||
| a hundred | sixteen | one.6 | 37 | 3.eight | 27 | 2.eight | 71 | 7.2 | |||||
| 20 | fifty | seventeen | one.seven | 39 | four | 24 | two.four | sixty nine | seven | 6500 | 3500 | <=20 | 10000 |
| 80 | 21 | two.1 | 46 | four.seven | 30 | three.one | 81 | .8 | |||||
| one hundred | 28 | 2.9 | 57 | 5.eight | 34 | three.5 | ninety five | nine.7 | |||||
The equipment ratio of the worm gear established is decided by dividing the amount of tooth of the equipment by the amount of threads. Therefore, solitary thread yields greater ratios than multithreading. All ep worm gear bushings have still left or proper thread. ep worm gear sets are accessible in solitary, double, triple and quadruple threads.