2023-06-16
Tag Archives: 12 volt dc motor
China 3rpm 30rpm 100rpm quiet self locking worm gearbox motor 12v 24v right angle gear motor dc 12 volt worm gear reduction motor double enveloping worm gearbox
Error:获取session失败,
Worm gear reducer gearbox
A worm gear reducer gearbox is a mechanical device used to reduce the viscosity of fluids. It can be used in a variety of applications and is available in a variety of sizes. Read on to learn more about these devices. They come in different shapes, sizes and prices. Also, these products are very reliable.
Viscosity
A new study shows that polymers derived from worms reduce the viscosity of aqueous solutions. The researchers mixed the worms with water and then applied shearing force to the mixture. Polymer-filled solutions are more resistant to shear forces than simple liquids. This is because when the solution is sheared, the filaments become entangled with each other. When the solution is sheared, the filaments line up, reducing the viscosity of the solution.
The researchers then used live insects to study the polymer’s shear thinning properties. By measuring “worm activity”, the researchers could calculate the viscosity of the mixture. The researchers then altered the worms’ activity and measured changes in the viscosity of the mixture.
The PSMA13 precursor was synthesized from BzMA at 90 °C. The resulting PSMA13-PBzMA65 worms were studied using SAXS, 1H NMR and TEM. They were found to be highly anisotropic over a wide temperature range.
The efficiency of a worm gear reducer gearbox increases with the number of revolutions of the input shaft. Braking torque also increases with the viscosity of the oil. These three factors are used to determine the efficiency of a worm gear reducer gearbox. A worm gear reducer gearbox with a helical pinion on the motor shaft will achieve a 40:1 gear ratio. The combination of a 4 liter ratio helical primary gear with a 10:l worm secondary gear will achieve high efficiency and overload capability.
The PSMA13-PBzMA65 dispersion has the same effective viscosity at 20 degrees Celsius and variable temperature. The transition time is 0.01 Pa s, indicating good thermal reversibility.
Self-locking function
Worm reducer gearboxes have many advantages. This gear has a high capacity and can transmit a lot of power. It’s also very quiet. Its advantages also include a space-saving design. Another benefit of worm reducer gearboxes is their ease of lubrication and cooling. It is also an excellent choice for transmitting high power with high gear ratios.
The self-locking function of the worm gear unit ensures that torque is only transmitted in one direction. When the load peaks, the torque signal is disabled. Unlike conventional gear reducer gearboxes, self-locking worm gears are not interchangeable.
Self-locking worm gears are not suitable for high mass applications because the weight of the driven mass can overwhelm the gear. The large mass can cause a huge side load on the worm, which can cause the worm to break. To solve this problem, a self-locking worm gear train with special provisions can be designed to reduce the heat generated.
The self-locking properties of worm reducer gearboxes are helpful in many industrial applications. It prevents reversing, which saves money on the braking system. It can also be used to lift and hold loads. The self-locking function is very useful in preventing backing.
The self-locking function depends on the pitch diameter and lead angle. A larger pitch diameter will make the self-locking function easier. However, the lead angle decreases as the pitch diameter increases. The higher pitch diameter will also make the worm reducer gearbox more resistant to backlash.
Self-locking worm gears are also useful in lifting and hoisting applications. If the worm gear is self-locking, it cannot reverse its direction without positive torque.s This makes the worm gear ideal for applications where the worm must be lowered.
application
The worm gear reducer gearbox market is a global industry consisting of several sub-sectors. This report analyzes past and current market trends and discusses key challenges and opportunities in this market. It also highlights leading marketing players and their marketing strategies. Furthermore, the report covers important segments and provides information on emerging segments.
Worm reducer gearboxes can be used in a variety of applications, such as reducing the speed and torque of rotating parts. These gears are usually available as gear sets and seat units and are available in multi-speed designs. Some manufacturers also offer precision worms and zero-backlash worms for high precision reduction.
Typically, worm gears are used on vertical axes that do not intersect. Compared to other gear drives, they are inefficient but produce a lot of reduction. There are two basic types of worm gears: double envelope and single envelope. The difference is in how they work. When the two axes do not intersect, a double-enveloping worm gear is used.
In the industrial world, worm gear reducer gearboxes are the most popular type of reducer gearbox. They are known for their high torque output multipliers and high reduction ratios. They are used in many power transmission applications including elevators, safety gates, and conveyor belts. They are especially suitable for low to medium-horsepower applications.
Worm gears can also be used for noise control. Its unique shape and size make it suitable for tight spaces. They are also suitable for conveying heavy materials and the packaging industry. In addition, they have high gear ratios, which make them suitable for small and compact machinery.
cost
The cost of a worm gear reducer gearbox depends on several factors, including the type of worm used, the materials used to manufacture the equipment, and the number of users. The worm gear reducer gearbox market is divided into two types: vertical and horizontal. Furthermore, the market is segmented by application, including the automotive industry, shipping industry, and machinery and equipment.
Worm gear reducer gearbox is a popular type of reducer gearbox. They are available in standard and flush-type packaging. They feature C-side inputs for standard NEMA motors and multiple mounting positions to suit the application. For example, a soup factory can use the same hollow reducer gearbox in multiple installation locations.
Another application for worm gear reducer gearboxes is in conveyors. They provide torque and speed reduction to move products efficiently. They are also widely used in security doors that automatically lock when they are closed. Typically, these doors use two separate worm drives. In this way, they cannot be reversed.
The cost of a worm gear reducer gearbox is determined by several factors. Size and material are important. Worm gear reducer gearboxes can be made of aluminum, cast iron, or stainless steel. Its efficiency depends on its size and proportions. It is usually used as a retarder in low-speed machinery, but can also be used as a secondary braking device.
There are two types of worms: standard worm and double worm gear. Standard worms have one or two threads, and double worm gears have one left-hand and right-hand thread. A single-threaded combination will give you a 50 reduction ratio, while a dual-threaded combination will only give you a 25% reduction.
manufacturing
Agknx Transmission Ltd. manufactures premium worm gear reducer gearboxes with robust construction and premium case-hardened steel worms. They use phosphor bronze centrifugally cast rims and attach them to the output shaft in the center. They also feature dual-purpose bearings and a large overhang load margin on the output shaft. The high-quality reducer gearbox also has a full range of positive lubrication functions. This means that they do not need special attention when using low-speed shaft extensions.
editor by CX 2023-04-26
china supplier 12V DC Motor 6V Micro Worm Gear Motor Reverse High Torque Reducer Self-Lock 12 Volt Engine 24V Electric Motor manufacturers
Solution Description
SHN CZPT s
1.Characteristics
1). CZPT effectiveness
2). CZPT running existence
3). Reduced noise
4). CZPT temperature increase
five). CZPT balance
6). The most CZPT design for the optimized working.
two.Associated Specs
1) 42mm collection
Model | DMW421 | DMW422 | DMW423 | |
Voltage | V | 24 | ||
No load speed | rpm | 5000 | 5000 | 5000 |
Rated torque | Nm | .063 | .094 | .a hundred twenty five |
Rated Speed | rpm | 4000 | 4000 | 4000 |
Rated Current | A | 1.seven | 2.5 | three.5 |
Torque(max) | Nm | .19 | .27 | .38 |
Back again-EMF constant | V/Krpm | three.thirteen | 3.thirteen | three.15 |
Torque Constant | Nm/A | .039 | .04 | .04 |
Resistance | ohm | 1.5 | .fifty three | .74 |
Bodyweight | Kg | .3 | .four | .5 |
Length | mm | forty one | fifty one | six |
two) 70mmSeries
Model | Rated Voltage | No load speed |
Rated torque | Rated Speed | Rated Present |
Rated energy |
L |
VDC | RPM | Nm | rpm | A | W | mm | |
DMW701 | forty eight | 3500 | .five | 3000 | four.3 | 157 | 86 |
DMW702 | forty eight | 3500 | one | 3000 | eight.seven | 314 | 116 |
DMW703 | 48 | 3500 | one.five | 3000 | twelve.nine | 471 | 136 |
three) 80mmSeries
Model | DMW801 | DMW802 | DMW803 | |
Voltage | V | 24 | ||
No load speed | rpm | 4200 | 4200 | 4200 |
Rated torque | Nm | .twenty five | .five | .75 |
Rated Speed | rpm | 3000 | 3000 | 3000 |
Rated Current | A | 5.2 | ten.5 | 15 |
Rated power | W | 79 | 157 | 236 |
Back again-EMF constant | V/Krpm | nine | nine.2 | 9.five |
Torque Constant | Nm/A | .06 | .052 | .05 |
Resistance | ohm | .5 | .43 | .35 |
Weight | Kg | one.six | 2.2 | three |
Length | mm | seventy five | ninety five | 115 |
4) 86mmSeries
Model | DMW861 | DMW862 | DMW863 | |
Voltage | V | 48 | ||
No load speed | rpm | 3500 | 3500 | 3400 |
Rated torque | Nm | 1. | one.eight | 2.five |
Rated Speed | rpm | 3000 | 3000 | 3000 |
Rated Current | A | 8.6 | 14.8 | twenty |
Torque(max) | Nm | 3. | 5.4 | 7.five |
Back again-EMF constant | V/Krpm | 9.8 | nine.eight | ten |
Torque Constant | Nm/A | .thirteen | .thirteen | .fourteen |
Resistance | ohm | .32 | .15 | .1 |
Excess weight | Kg | two.two | 3.two | four.two |
Length | mm | 80 | one hundred and five | a hundred thirty |
five) 60mmSeries
Model | DMW601 | DMW602 | DMW603 | |
Voltage | V | 36 | ||
No load speed | rpm | 4100 | 4100 | 4100 |
Rated torque | Nm | .25 | .5 | .seventy five |
Rated Speed | rpm | 3000 | 3000 | 3000 |
Rated Current | A | three | 6 | 9 |
Torque(max) | Nm | .seventy five | one.five | 2 |
Back-EMF constant | V/Krpm | 6.2 | six.five | 6.5 |
Torque Constant | Nm/A | .043 | .045 | .041 |
Resistance | ohm | .59 | .26 | .2 |
Bodyweight | Kg | .9 | 1.two | one.six |
Size | mm | 78 | ninety nine | one hundred twenty |
six) 57mm Sequence
Model | DMW571 | DMW572 | DMW573 | DMW574 | ||
Voltage | V | 36 | ||||
No load speed | rpm | 5200 | 5200 | 5300 | 5400 | |
Rated torque | Nm | .eleven | .22 | .32 | .forty two | |
Rated Speed | rpm | 4000 | 4000 | 4000 | 4000 | |
Rated Current | A | 1.eight | three.2 | 4.7 | six.5 | |
Torque(max) | Nm | .3 | .five | .eight | 1.2 | |
Back again-EMF constant | V/Krpm | four.five | four.eight | 4.83 | 4.nine | |
Torque Constant | Nm/A | .072 | .078 | .08 | .09 | |
Resistance | ohm | 1.seven | .seventy five | .5 | .39 | |
Fat | Kg | .forty five | .eight | one.one | one.four | |
Length | mm | 55 | seventy five | ninety five | one hundred fifteen |
seven) 57 CZPT Torque
Model | DMW571 | DMW572 | DMW573 | DMW574 | |
Voltage | V | 36 | |||
No load speed | rpm | 5200 | 5200 | 5200 | 5200 |
Rated torque | Nm | .14 | .28 | .43 | .forty nine |
Rated Speed | rpm | 4000 | 4000 | 4000 | 4000 |
Rated Current | A | two.2 | 4.5 | six.eight | seven.nine |
Torque(max) | Nm | .4 | .six | .9 | 1.5 |
Back-EMF constant | V/Krpm | 4.5 | four.8 | 4.83 | four.nine |
Torque Constant | Nm/A | .072 | .078 | .08 | .09 |
Resistance | ohm | 2 | .nine | .seven | .5 |
Weight | Kg | .5 | .9 | one.three | 1.8 |
Duration | mm | 55 | 75 | ninety five | one hundred fifteen |
3.Outlines/Drawings
four.About US
five.Principal Goods
6.Package deal and CZPT
one.FedEX / DHL / UPS / TNT for samples,Door to doorway service
2.By sea for batch products
3.Customs specifying freight forwarders or negotiable shipping techniques
4.Supply Time:20-twenty five Times for samples30-35 Days for batch items
5.Payment Terms:T/T,L/C at sight,D/P and so forth.
seven.FAQ
Q1. When can I get the quotation?
We usually quotation inside of 24 hrs after we get your inquiry.
If you are urgent to get the value, make sure you send the concept on and or get in touch with us right.
Q2. How can I get a sample to check out your good quality?
After value verified, you can requiry for samples to check out good quality.
If you need to have the samples, we will charge for the sample expense.
But the sample value can be refundable when your quantity of initial buy is over the MOQ
Q3. Can you do CZPT for us?
Sure, the merchandise packing can be created as you want.
This fall. How about MOQ?
one pcs for carton box.
Q5. What is your primary market?
Japanese CZPT pe, CZPT Asia, South CZPT ica.
Make sure you feel free to contact us if you have any query.
Certain pitches and qualified prospects of the worm do not let the worm gear to drive the worm. This is helpful when the application requirements to lock the output if the software is working in the reverse path. When the helix angle is less than 5°, the worm is self-locking. When the helix angle is higher than 10°, the worm can be driven again. Worm and worm gear assemblies need to be mounted on vertical, non-intersecting shafts.
12 made in China – replacement parts – in Prague Czechia Volt 24 Volt 22mm Medical Application Planetary Electric DC Geared Motor for Robot with ce certificate top quality low price
We – EPG Group the bigge EPT Chain and agricultural gearbox factory in China with 5 various branches. For more particulars: Cell/whatsapp/telegram/Kakao us at: 0086~13083988828 13858117778 0571 88828
Observe:
The technical specs can be developed according to the customer’s demands!
Application:
Electric Drill, Screwdriver, Scanners, Printers, Vending Device, Window Curtain, Espresso Equipment, Electric powered Lock, and so on.
Parameter:
Reduction ratio | one/five | 1/18 | one/20 | one/25 | one/66 | one/77 | 1/ninety | one/a hundred and ten | one/136 | one/246 | 1/336 | one/393 | one/484 | 1/597 | 1/735 | 1/1079 | 1/1475 | 1/2124 | 1/3968 | |
12V | Rated torque(g.cm) | 170 | 560 | 650 | 820 | 1800 | 2100 | 2450 | 3000 | 3700 | 5000 | 5000 | 5000 | 5000 | 5000 | 5000 | 6000 | 6000 | 6000 | 6000 |
Rated pace(rpm) | 1500 | 400 | 340 | 280 | one hundred and five | 94 | 80 | sixty five | fifty three | 29 | 22 | 19 | fifteen.5 | twelve.5 | ten | seven.one | 5.3 | 3.eight | 2. | |
24V | Rated torque(g.cm) | 190 | 640 | 750 | 930 | 2000 | 2400 | 2800 | 3500 | 4000 | 5000 | 5000 | 5000 | 5000 | 5000 | 5000 | 6000 | 6000 | 6000 | 6000 |
Rated velocity(rpm) | 1600 | 420 | 350 | 290 | 110 | 98 | eighty four | sixty eight | fifty five | 31 | 23 | 20 | sixteen | thirteen | 10.5 | seven.4 | 5.five | 3.9 | two. | |
Rotation route | CW | |||||||||||||||||||
Length(L-mm) | 23.3 | 29.five | 35.seven | 41.nine | 48.1 |
Rated volt(V) | Rated torque(g.cm) | Rated speed(rpm) | Rated current(mA) | No-load speed(rpm) | No load recent(mA) | Excess weight(g) |
12 | forty six | 7230 | <=500 | 9000 | <=120 | 43 |
24 | 53 | 7550 | <=300 | 9000 | <=80 | forty three |
About Us:
We specialized in studying, developing, and servicing electric powered motors, gearbox, and large precision gears with the modest module. Following several years of development, we have an impartial item style and R&D group, service staff, and a skilled high quality management staff. To comprehend our support idea greater, supply higher-high quality products and excellent support, we have been fully commited to the core potential and coaching. We have a keeping factory in HangZhou, which produces high precision small mildew gears, gear shaft, gearbox, and planetary gearbox assembling.
Work-flow:
Certification:
RoHS, CE, and far more…
Support:
ODM & OEM
Gearbox layout and development
Package deal&Ship:
Carton, pallet, or what you want
The delivery time is about thirty-forty five days.
Customer’s Visiting:
FAQ:
one. Can you customized gearbox?
Indeed.
2. DO you provide the sample?
Of course.
3. Do you provide technical assist?
Of course
4. Do you have a factory?
Sure, we are a specialist company.
5. Can I arrive to your organization to go to?
Y EPT
The use of authentic equipment manufacturer’s (OEM) portion figures or logos , e.g. CASE® and John Deere® are for reference functions only and for indicating merchandise use and compatibility. Our firm and the detailed substitution parts contained herein are not sponsored, authorized, or manufactured by the OEM.