right angle motor gearbox

Error:获取session失败，

worm reducer

Worm gear reducer gearbox

A worm gear reducer gearbox is a mechanical device used to reduce the viscosity of fluids. It can be used in a variety of applications and is available in a variety of sizes. Read on to learn more about these devices. They come in different shapes, sizes and prices. Also, these products are very reliable.

Viscosity

A new study shows that polymers derived from worms reduce the viscosity of aqueous solutions. The researchers mixed the worms with water and then applied shearing force to the mixture. Polymer-filled solutions are more resistant to shear forces than simple liquids. This is because when the solution is sheared, the filaments become entangled with each other. When the solution is sheared, the filaments line up, reducing the viscosity of the solution.
The researchers then used live insects to study the polymer’s shear thinning properties. By measuring “worm activity”, the researchers could calculate the viscosity of the mixture. The researchers then altered the worms’ activity and measured changes in the viscosity of the mixture.
The PSMA13 precursor was synthesized from BzMA at 90 °C. The resulting PSMA13-PBzMA65 worms were studied using SAXS, 1H NMR and TEM. They were found to be highly anisotropic over a wide temperature range.
The efficiency of a worm gear reducer gearbox increases with the number of revolutions of the input shaft. Braking torque also increases with the viscosity of the oil. These three factors are used to determine the efficiency of a worm gear reducer gearbox. A worm gear reducer gearbox with a helical pinion on the motor shaft will achieve a 40:1 gear ratio. The combination of a 4 liter ratio helical primary gear with a 10:l worm secondary gear will achieve high efficiency and overload capability.
The PSMA13-PBzMA65 dispersion has the same effective viscosity at 20 degrees Celsius and variable temperature. The transition time is 0.01 Pa s, indicating good thermal reversibility.

Self-locking function

Worm reducer gearboxes have many advantages. This gear has a high capacity and can transmit a lot of power. It’s also very quiet. Its advantages also include a space-saving design. Another benefit of worm reducer gearboxes is their ease of lubrication and cooling. It is also an excellent choice for transmitting high power with high gear ratios.
The self-locking function of the worm gear unit ensures that torque is only transmitted in one direction. When the load peaks, the torque signal is disabled. Unlike conventional gear reducer gearboxes, self-locking worm gears are not interchangeable.
Self-locking worm gears are not suitable for high mass applications because the weight of the driven mass can overwhelm the gear. The large mass can cause a huge side load on the worm, which can cause the worm to break. To solve this problem, a self-locking worm gear train with special provisions can be designed to reduce the heat generated.
The self-locking properties of worm reducer gearboxes are helpful in many industrial applications. It prevents reversing, which saves money on the braking system. It can also be used to lift and hold loads. The self-locking function is very useful in preventing backing.
The self-locking function depends on the pitch diameter and lead angle. A larger pitch diameter will make the self-locking function easier. However, the lead angle decreases as the pitch diameter increases. The higher pitch diameter will also make the worm reducer gearbox more resistant to backlash.
Self-locking worm gears are also useful in lifting and hoisting applications. If the worm gear is self-locking, it cannot reverse its direction without positive torque.s This makes the worm gear ideal for applications where the worm must be lowered.

application

The worm gear reducer gearbox market is a global industry consisting of several sub-sectors. This report analyzes past and current market trends and discusses key challenges and opportunities in this market. It also highlights leading marketing players and their marketing strategies. Furthermore, the report covers important segments and provides information on emerging segments.
Worm reducer gearboxes can be used in a variety of applications, such as reducing the speed and torque of rotating parts. These gears are usually available as gear sets and seat units and are available in multi-speed designs. Some manufacturers also offer precision worms and zero-backlash worms for high precision reduction.
Typically, worm gears are used on vertical axes that do not intersect. Compared to other gear drives, they are inefficient but produce a lot of reduction. There are two basic types of worm gears: double envelope and single envelope. The difference is in how they work. When the two axes do not intersect, a double-enveloping worm gear is used.
In the industrial world, worm gear reducer gearboxes are the most popular type of reducer gearbox. They are known for their high torque output multipliers and high reduction ratios. They are used in many power transmission applications including elevators, safety gates, and conveyor belts. They are especially suitable for low to medium-horsepower applications.
Worm gears can also be used for noise control. Its unique shape and size make it suitable for tight spaces. They are also suitable for conveying heavy materials and the packaging industry. In addition, they have high gear ratios, which make them suitable for small and compact machinery.

cost

The cost of a worm gear reducer gearbox depends on several factors, including the type of worm used, the materials used to manufacture the equipment, and the number of users. The worm gear reducer gearbox market is divided into two types: vertical and horizontal. Furthermore, the market is segmented by application, including the automotive industry, shipping industry, and machinery and equipment.
Worm gear reducer gearbox is a popular type of reducer gearbox. They are available in standard and flush-type packaging. They feature C-side inputs for standard NEMA motors and multiple mounting positions to suit the application. For example, a soup factory can use the same hollow reducer gearbox in multiple installation locations.
Another application for worm gear reducer gearboxes is in conveyors. They provide torque and speed reduction to move products efficiently. They are also widely used in security doors that automatically lock when they are closed. Typically, these doors use two separate worm drives. In this way, they cannot be reversed.
The cost of a worm gear reducer gearbox is determined by several factors. Size and material are important. Worm gear reducer gearboxes can be made of aluminum, cast iron, or stainless steel. Its efficiency depends on its size and proportions. It is usually used as a retarder in low-speed machinery, but can also be used as a secondary braking device.
There are two types of worms: standard worm and double worm gear. Standard worms have one or two threads, and double worm gears have one left-hand and right-hand thread. A single-threaded combination will give you a 50 reduction ratio, while a dual-threaded combination will only give you a 25% reduction.
worm reducer

manufacturing

Agknx Transmission Ltd. manufactures premium worm gear reducer gearboxes with robust construction and premium case-hardened steel worms. They use phosphor bronze centrifugally cast rims and attach them to the output shaft in the center. They also feature dual-purpose bearings and a large overhang load margin on the output shaft. The high-quality reducer gearbox also has a full range of positive lubrication functions. This means that they do not need special attention when using low-speed shaft extensions.
China 3rpm 30rpm 100rpm quiet self locking worm gearbox motor 12v 24v right angle gear motor dc 12 volt worm gear reduction motor double enveloping worm gearbox
editor by CX 2023-04-26

Product Description

Product Description

-S Series Helical gearbox

Product Features
1.High modular design.
2.Integrated casting housing,compact dimension,high loading support, stable transmitting and low noise level.
3.With the special gear geometry, it gets high torque, efficiency and long life circle.
4.It can achieve the direct combination for 2 sets of gearbox.
5.High efficiency and save power.

6.Save cost and low maintenance.

Product Parameters

1. Technical data

Size	38	48	58	68	78	88	98
Structure	BS BSA BSF BSAF BSAT BSAZ
Input Power(kW)	0.18~0.75	0.18~1.5	0.18~3	0.25~5.5	0.55~7.5	0.75~15	1.5~22
Ratio	10.27~165.71	11.46~244.74	10.78~196.21	11.55~227.20	9.96~241.09	11.83~223.26	12.75~230.48
Permissible Torque(N.m)	90	170	300	520	1270	2280	4000
Weight(kg)	7	10	14	26	50	100	170

2: Design option

S series gear units are available in the following designs
S…Y…	Foot-mounted parallel shaft helical gear units with solid shaft
SA…Y…	Parallel shaft helical gear units with hollow shaft
SAZ…Y…	Short-flange mounted parallel shaft helical gear units with hollow shaft
SF…Y…	Flange-mounted parallel shaft helical gear units with solid shaft
SAT…Y…	Flange-mounted parallel shaft helical gear units with hollow shaft
S(SF,SA,SAF,SAZ)S…	Shaft input parallel shaft helical gear units
S(SF,SA,SAF,SAZ)…R…Y…	Combinatorial parallel shaft helical gear units
S(SF,SA,SAF,SAZ)S…R…	Shaft input combinatorial parallel shaft helical gear units

Materials Data Sheet

Housing material	Grey Cast iron
Housing hardness	HBS163~255
Gear material	20CrMnTi alloy steel
Surface hardness of gears	HRC58°~62 °
Gear core hardness	HRC33~48
Input / Output shaft material	40Cr alloy steel
Input / Output shaft hardness	HRC32~36
Machining precision of gears	accurate grinding, 6~5 Grade
Lubricating oil	GB L-CKC220-460, Shell Omala220-460
Heat treatment	tempering, cementiting, quenching, normalizing, etc.
Efficiency	94%~96% (depends on the transmission stage)
Noise (MAX)	60~68dB
Temp. rise (MAX)	40°C
Temp. rise (Oil)(MAX)	50°C
Vibration	≤20µm
Backlash	≤20Arcmin
Brand of bearings	China top brand bearing, HRB/LYC/ZWZ/C&U. Or other brands requested, SKF, FAG, INA, NSK.
Brand of oil seal	NAK — ZheJiang or other brands requested

Detailed Photos

Our process of production

Our product line

Company Profile

Company Profile

Bode was founded in 2007, which is located in HangZhou city, ZHangZhoug province. As 1 professional manufacturer and exporter, we have more than 17 years’ experience in R & D of worm reducer, gear reducer, gearbox , AC motor and relative spare parts. We have factory with advanced production and test equipment, the strong development of team and producing capacity offer our customers with high quality products. Our products widely served to various industries of Metallurgy, Chemicals, lifting, mining, Petroleum, textile, medicine, wooden etc. Main markets: China, Africa, Australia, Vietnam, Turkey, Japan, Korea, Philippines… Welcome to ask us any questions, good offer always for you for long term business.

FAQ

Q1: Are you trading company or manufacturer?
A: We are factory.

Q2: What kinds of gearbox can you produce for us?
A: Main products of our company: R, S, K, F series helical-tooth reducer, RV series worm gear reducer,H Series Parallel Shaft Helical Reduction Gear Box

Q3: Can you make as per custom drawing?
A: Yes, we offer customized service for customers.

Q4: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.

Q5: What information shall we give before placing a purchase order?
A: a) Type of the gearbox, ratio, input and output type, input flange, mounting position, and motor informationetc.
b) Housing color.
c) Purchase quantity.
d) Other special requirements.

Q6: How long is your delivery time?
A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock.

Q7: What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery

If you are interested in our product, welcome to contact with us.
Our team will do our best to meet your need 🙂

Application:	Motor, Machinery, Marine, Agricultural Machinery
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

Samples:	US$ 90/Piece 1 Piece(Min.Order) \| Request Sample

Customization:	Available \|

Worm gear reducer gearbox

A worm gear reducer gearbox is a gear reducer gearbox that uses a worm gear train to reduce the required force. Unlike traditional gear reducer gearboxes, these units are small and require low horsepower ratings. This reduces their efficiency, but their low cost and compact design help make up for this shortcoming. However, these gear reducer gearboxes have some drawbacks, including their tendency to lock up when reversing.
worm reducer

high efficiency

High-efficiency worm reducer gearboxes are ideal for applications where high performance, repeatability, and accuracy are critical. It consists of an input hypoid gear and an output hypoid bevel gear. The input worm rotates perpendicular to the output worm, so for every revolution of the input worm, the output gear makes one revolution. This arrangement reduces friction (another source of energy loss) in a high-efficiency worm gear to at least two arc minutes.
Compared with worm gear reducer gearboxes, hypoid gearmotors offer several advantages, including lower operating costs and higher efficiency. For example, hypoid gear motors can transmit more torque even at high reduction ratios. Also, they are more efficient than worm gear reducer gearboxes, which means they can produce the same output with a smaller motor.
In recent years, the efficiency of worm gear reducer gearboxes has been dramatically improved. Manufacturers have made great strides in materials, design, and manufacturing. New designs, including dual-enveloping worm gear reducer gearboxes, increase efficiency by 3 to 8 percent. These improvements were made possible through countless hours of testing and development. Worm gear reducer gearboxes also offer lower initial costs and higher overload capability than competing systems.
Worm gear reducer gearboxes are popular because they provide maximum reduction in a small package. Their compact size makes them ideal for low to medium-horsepower applications and they are reticent. They also offer higher torque output and better shock load tolerance. Finally, they are an economical option to reduce the device’s power requirements.

low noise

Low-noise worm gear reducer gearboxes are designed to reduce noise in industrial applications. This type of reducer gearbox uses fewer bearings and can work in various mounting positions. Typically, a worm reducer gearbox is a single-stage unit with only one shaft and one gear. Since there is only one gear, the noise level of the worm gear reducer gearbox will be lower than other types.
A worm gear reducer gearbox can be integrated into the electric power steering system to reduce noise. Worm reducer gearboxes can be made and from many different materials. The following three-stage process will explain the components of a low-noise worm reducer gearbox.
Worm gear reducer gearboxes can be mounted at a 90-degree angle to the input worm shaft and are available with various types of hollow or solid output shafts. These reducer gearboxes are especially beneficial for applications where noise reduction is essential. They also have fewer parts and are smaller than other types of reducer gearboxes, making them easier to install.
Worm gear reducer gearboxes are available from various manufacturers. Due to their widespread availability, gear manufacturers maintain extensive inventories of these reducer gearboxes. The worm gear ratio is standard, and the size of the worm gear reducer gearbox is universal. Also, worm gear reducer gearboxes do not need to be sized for a specific purpose, unlike other load interruptions.
worm reducer

pocket

A worm gear reducer gearbox is a transmission mechanism with a compact structure, large transmission ratio, and self-locking function under certain conditions. The worm gear reducer gearbox series products are designed with American technology and have the characteristics of stable transmission, strong bearing capacity, low noise, and compact structure. In addition, these products can provide a wide range of power supplies. However, these worm reducer gearboxes are prone to leaks, usually caused by design flaws.
Worm gear reducer gearboxes are available in single-stage and double-stage. The first type consists of an oil tank that houses the worm gear and bearings. The second type uses a worm gear with a sleeve for the first worm gear.
When choosing a gear reducer gearbox, it is essential to choose a high-quality unit. Improper gear selection can cause rapid wear of the worm gear. While worm gear reducer gearboxes are generally durable, their degree of wear depends on the selection and operating conditions. For example, overuse, improper assembly, or working in extreme conditions can lead to rapid wear.
Worm reducer gearboxes reduce speed and torque. Worm gears can be used to reduce the speed of rotating machines or inertial systems. Worm gears are a type of bevel gear, and their meshing surfaces have great sliding force. Because of this, worm gears can carry more weight than spur gears. They are also harder to manufacture. However, the high-quality design of the worm gear makes it an excellent choice for applications requiring high torque and high-speed rotation.
Worm gears can be manufactured using three types of gears. For large reduction ratios, the input and output gears are irreversible. However, the worm reducer gearbox can be constructed with multiple helices. The multi-start worm drive also minimizes braking effects.

Self-locking function

The worm reducer gearbox is self-locking to prevent the load from being driven back to the ground. The self-locking function is achieved by a worm that meshes with the rack and pinion. When the load reaches the highest position, the reverse signal is disabled. The non-locking subsystem back-drives the load to its original position, while the self-locking subsystem remains in its uppermost position.
The self-locking function of the worm reducer gearbox is a valuable mechanical feature. It helps prevent backing and saves the cost of the braking system. Additionally, self-locking worm gears can be used to lift and hold loads.
The self-locking worm gear reducer gearbox prevents the drive shaft from driving backward. It works with the axial force of the worm gear. A worm reducer gearbox with a self-locking function is a very efficient machine tool.
Worm gear reducer gearboxes can be made with two or four teeth. Single-ended worms have a single-tooth design, while double-ended worms have two threads on the cylindrical gear. A multi-boot worm can have up to four boots. Worm reducer gearboxes can use a variety of gear ratios, but the main advantage is their compact design. It has a larger load capacity than a cross-shaft helical gear mechanism.
The self-locking function of the worm reducer gearbox can also be used for gear sets that are not necessarily parallel to the shaft. It also prevents backward travel and allows forward travel. The self-locking function is achieved by a ratchet cam arranged around the gear member. It also enables selective coupling and decoupling between gear members.
worm reducer

high gear ratio

Worm reducer gearboxes are an easy and inexpensive way to increase gear ratios. These units consist of two worm gears – an input worm gear and an output worm gear. The input worm rotates perpendicular to the output worm gear, which also rotates perpendicular to itself. For example, a 5:1 worm gearbox requires 5 revolutions per worm gear, while a 60:1 worm gearbox requires 60 revolutions. However, this arrangement is prone to inefficiency since the worm gear experiences only sliding friction, not rolling friction.
High-reduction applications require many input revolutions to rotate the output gear. Conversely, low input speed applications suffer from the same friction issues, albeit with a different amount of friction. Worms that spin at low speeds require more energy to maintain their movement. Worm reducer gearboxes can be used in many types of systems, but only some are suitable for high-speed applications.
Worm gears are challenging to produce, but the envelope design is the best choice for applications requiring high precision, high efficiency, and minimal backlash. Envelope design involves modifying gear teeth and worm threads to improve surface contact. However, this type of worm gear is more expensive to manufacture.
Worm gear motors have lower initial meshing ratios than hypoid gear motors, which allows the use of smaller motors. So a 1 hp worm motor can achieve the same output as a 1/2 hp motor. A study by Agknx compared two different types of geared motors, comparing their power, torque, and gear ratio. The results show that the 1/2 HP hypoid gear motor is more efficient than the worm gear motor despite the same output.
Another advantage of the worm gear reducer gearbox is the low initial cost and high efficiency. It offers high ratios and high torque in a small package, making it ideal for low to medium-horsepower applications. Worm gear reducer gearboxes are also more shock-resistant.
China Best Sales Right Angle Helical Worm Gearbox with IEC Motor worm gearbox components
editor by CX

Error:获取返回内容失败，
Your session has expired. Please reauthenticate.

Application:	Motor, Electric Cars, Motorcycle, Machinery, Marine, Agricultural Machinery, Car
Function:	Distribution Power, Clutch, Change Drive Torque, Change Drive Direction, Speed Changing, Speed Reduction, Speed Increase
Layout:	Coaxial
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Three-Step

Samples:	US$ 9999/Piece 1 Piece(Min.Order) \| Request Sample

Merchandise Description

Item Description

Principal Materials:
1)housing:aluminium alloy ADC12(measurement 571-090) die forged iron HT200(dimension a hundred and ten-a hundred and fifty)
two)Worm:20Cr, ZI Involute profile carbonize&quencher heat remedy make equipment surface hardness up to 56-sixty two HRC After precision grinding, carburization layer’s thickness in between .3-.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-1

Comprehensive Photos

Blend Options:
Input:with enter shaft, With square flange,With IEC normal input flange
Output:with torque arm, output flange, one output shaft, double output shaft, plastic protect
Worm reducers are available with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+Laptop, NMRV+UDL, NMRV+MOTORS

Exploded See:

Solution Parameters

Previous Model	New Model	Ratio	Center Distance	Energy	Input Dia.	Output Dia.	Output Torque	Fat
RV571		7.5~100	25mm	.06KW~.12KW	Φ9	Φ11	21N.m	.7kgs
RV030	RW030	7.5~a hundred	30mm	.06KW~.25KW	Φ9(Φ11)	Φ14	45N.m	one.2kgs
RV040	RW040	7.5~one hundred	40mm	.09KW~.55KW	Φ9(Φ11,Φ14)	Φ18(Φ19)	84N.m	2.3kgs
RV050	RW050	seven.5~100	50mm	.12KW~1.5KW	Φ11(Φ14,Φ19)	Φ25(Φ24)	160N.m	three.5kgs
RV063	RW063	seven.5~one hundred	63mm	.18KW~2.2KW	Φ14(Φ19,Φ24)	Φ25(Φ28)	230N.m	6.2kgs
RV075	RW075	7.5~one hundred	75mm	.25KW~4.0KW	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410N.m	nine.0kgs
RV090	RW090	seven.5~one hundred	90mm	.37KW~4.0KW	Φ19(Φ24,Φ28)	Φ35(Φ38)	725N.m	13.0kgs
RV110	RW110	7.5~a hundred	110mm	.55KW~7.5KW	Φ19(Φ24,Φ28,Φ38)	Φ42	1050N.m	35.0kgs
RV130	RW130	7.5~one hundred	130mm	.75KW~7.5KW	Φ24(Φ28,Φ38)	Φ45	1550N.m	forty eight.0kgs
RV150	RW150	7.5~100	150mm	2.2KW~15KW	Φ28(Φ38,Φ42)	Φ50		eighty four.0kgs

GMRV Outline Dimension:

GMRV	A	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	I	M	N	O	P	Q	R	S	T	BL	β	b	t	V
030	eighty	ninety seven	54	44	fourteen	55	32	56	63	65	29	55	forty	fifty seven	30	75	forty four	6.five	21	five.five	M6*10(n=4)	0°	five	16.3	27
040	100	121.5	70	60	18(19)	60	forty three	seventy one	78	75	36.5	70	50	seventy one.5	forty	87	fifty five	6.five	26	6.5	M6*10(n=4)	45°	six	twenty.8(21.8)	35
050	one hundred twenty	a hundred and forty four	eighty	70	25(24)	70	49	eighty five	92	eighty five	43.5	eighty	60	84	50	one hundred	64	8.five	thirty	seven	M8*twelve(n=4)	45°	eight	28.3(27.3)	40
063	one hundred forty four	174	100	eighty five	25(28)	80	67	103	112	ninety five	fifty three	95	72	102	63	a hundred and ten	80	eight.five	36	8	M8*12(n=8)	45°	8	28.3(31.3)	50
075	172	205	one hundred twenty	ninety	28(35)	ninety five	seventy two	112	one hundred twenty	a hundred and fifteen	fifty seven	112.five	86	119	75	140	ninety three	11	40	10	M8*14(n=8)	45°	eight(10)	31.3(38.3)	sixty
090	206	238	a hundred and forty	100	35(38)	110	seventy four	one hundred thirty	a hundred and forty	a hundred thirty	67	129.five	103	one hundred thirty five	90	one hundred sixty	102	thirteen	45	eleven	M10*16(n=8)	45°	ten	38.3(41.3)	70
110	255	295	a hundred and seventy	115	forty two	a hundred thirty	–	144	one hundred fifty five	one hundred sixty five	seventy four	one hundred sixty	127.five	167.5	a hundred and ten	two hundred	one hundred twenty five	fourteen	fifty	fourteen	M10*18(n=8)	45°	12	45.three	eighty five
a hundred thirty	293	335	two hundred	one hundred twenty	45	a hundred and eighty	–	one hundred fifty five	170	215	81	179	146.5	187.five	130	250	a hundred and forty	sixteen	60	15	M12*twenty(n=8)	45°	fourteen	forty eight.eight	one hundred
150	340	four hundred	240	a hundred forty five	fifty	a hundred and eighty	–	185	200	215	ninety six	210	170	230	150	250	one hundred eighty	eighteen	72.5	eighteen	M12*22(n=8)	45°	14	fifty three.8	120

Business Profile

About CZPT Transmission:
We are a professional reducer manufacturer located in HangZhou, ZHangZhoug province.
Our top items is full variety of RV571-a hundred and fifty worm reducers , also supplied GKM hypoid helical gearbox, GRC inline helical gearbox, Pc units, UDL Variators and AC Motors, G3 helical equipment motor.
Items are extensively utilized for apps this kind of as: foodstuffs, ceramics, packing, chemical compounds, pharmacy, plastics, paper-generating, construction equipment, metallurgic mine, environmental defense engineering, and all kinds of automated strains, and assembly strains.
With quickly shipping, exceptional right after-income services, sophisticated creating facility, our items offer well both at residence and overseas. We have exported our reducers to Southeast Asia, Eastern Europe and Middle East and so on.Our goal is to develop and innovate on basis of higher quality, and produce a good popularity for reducers.

Packing info:Plastic Baggage+Cartons+Wooden Situations , or on ask for
We take part Germany Hannver Exhibition-ZheJiang PTC Honest-Turkey Earn Eurasia

Logistics

Following Product sales Support

1.Servicing Time and Warranty:In 1 yr after obtaining goods.
2.Other Support: Like modeling variety guidebook, set up guidebook, and issue resolution guidebook, etc.

FAQ

1.Q:Can you make as for each customer drawing?
A: Yes, we supply tailored support for clients appropriately. We can use customer’s nameplate for gearboxes.
two.Q:What is your phrases of payment ?
   A: 30% deposit just before generation,balance T/T just before delivery.
3.Q:Are you a trading organization or maker?
   A:We are a manufacurer with superior products and experienced staff.
four.Q:What is your generation potential?
   A:8000-9000 PCS/Month
5.Q:Free sample is offered or not?
   A:Of course, we can supply free sample if buyer concur to pay for the courier price
6.Q:Do you have any certificate?
   A:Of course, we have CE certificate and SGS certification report.

Speak to info:
Ms Lingel Pan
For any queries just truly feel totally free ton get in touch with me. Numerous many thanks for your kind interest to our organization!

/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery, Industry
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:	Right Angle
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 12/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \|

###

Old Model	New Model	Ratio	Center Distance	Power	Input Dia.	Output Dia.	Output Torque	Weight
RV025		7.5~100	25mm	0.06KW~0.12KW	Φ9	Φ11	21N.m	0.7kgs
RV030	RW030	7.5~100	30mm	0.06KW~0.25KW	Φ9(Φ11)	Φ14	45N.m	1.2kgs
RV040	RW040	7.5~100	40mm	0.09KW~0.55KW	Φ9(Φ11,Φ14)	Φ18(Φ19)	84N.m	2.3kgs
RV050	RW050	7.5~100	50mm	0.12KW~1.5KW	Φ11(Φ14,Φ19)	Φ25(Φ24)	160N.m	3.5kgs
RV063	RW063	7.5~100	63mm	0.18KW~2.2KW	Φ14(Φ19,Φ24)	Φ25(Φ28)	230N.m	6.2kgs
RV075	RW075	7.5~100	75mm	0.25KW~4.0KW	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410N.m	9.0kgs
RV090	RW090	7.5~100	90mm	0.37KW~4.0KW	Φ19(Φ24,Φ28)	Φ35(Φ38)	725N.m	13.0kgs
RV110	RW110	7.5~100	110mm	0.55KW~7.5KW	Φ19(Φ24,Φ28,Φ38)	Φ42	1050N.m	35.0kgs
RV130	RW130	7.5~100	130mm	0.75KW~7.5KW	Φ24(Φ28,Φ38)	Φ45	1550N.m	48.0kgs
RV150	RW150	7.5~100	150mm	2.2KW~15KW	Φ28(Φ38,Φ42)	Φ50		84.0kgs

###

GMRV	A	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	I	M	N	O	P	Q	R	S	T	BL	β	b	t	V
030	80	97	54	44	14	55	32	56	63	65	29	55	40	57	30	75	44	6.5	21	5.5	M6*10(n=4)	0°	5	16.3	27
040	100	121.5	70	60	18(19)	60	43	71	78	75	36.5	70	50	71.5	40	87	55	6.5	26	6.5	M6*10(n=4)	45°	6	20.8(21.8)	35
050	120	144	80	70	25(24)	70	49	85	92	85	43.5	80	60	84	50	100	64	8.5	30	7	M8*12(n=4)	45°	8	28.3(27.3)	40
063	144	174	100	85	25(28)	80	67	103	112	95	53	95	72	102	63	110	80	8.5	36	8	M8*12(n=8)	45°	8	28.3(31.3)	50
075	172	205	120	90	28(35)	95	72	112	120	115	57	112.5	86	119	75	140	93	11	40	10	M8*14(n=8)	45°	8(10)	31.3(38.3)	60
090	206	238	140	100	35(38)	110	74	130	140	130	67	129.5	103	135	90	160	102	13	45	11	M10*16(n=8)	45°	10	38.3(41.3)	70
110	255	295	170	115	42	130	–	144	155	165	74	160	127.5	167.5	110	200	125	14	50	14	M10*18(n=8)	45°	12	45.3	85
130	293	335	200	120	45	180	–	155	170	215	81	179	146.5	187.5	130	250	140	16	60	15	M12*20(n=8)	45°	14	48.8	100
150	340	400	240	145	50	180	–	185	200	215	96	210	170	230	150	250	180	18	72.5	18	M12*22(n=8)	45°	14	53.8	120

/ Piece
| 1 Piece

(Min. Order)

###

Application:	Motor, Machinery, Marine, Agricultural Machinery, Industry
Function:	Distribution Power, Change Drive Torque, Speed Changing, Speed Reduction
Layout:	Right Angle
Hardness:	Hardened Tooth Surface
Installation:	Horizontal Type
Step:	Double-Step

###

Samples:	US$ 12/Piece 1 Piece(Min.Order) \| Request Sample

###

Customization:	Available \|

###

Old Model	New Model	Ratio	Center Distance	Power	Input Dia.	Output Dia.	Output Torque	Weight
RV025		7.5~100	25mm	0.06KW~0.12KW	Φ9	Φ11	21N.m	0.7kgs
RV030	RW030	7.5~100	30mm	0.06KW~0.25KW	Φ9(Φ11)	Φ14	45N.m	1.2kgs
RV040	RW040	7.5~100	40mm	0.09KW~0.55KW	Φ9(Φ11,Φ14)	Φ18(Φ19)	84N.m	2.3kgs
RV050	RW050	7.5~100	50mm	0.12KW~1.5KW	Φ11(Φ14,Φ19)	Φ25(Φ24)	160N.m	3.5kgs
RV063	RW063	7.5~100	63mm	0.18KW~2.2KW	Φ14(Φ19,Φ24)	Φ25(Φ28)	230N.m	6.2kgs
RV075	RW075	7.5~100	75mm	0.25KW~4.0KW	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410N.m	9.0kgs
RV090	RW090	7.5~100	90mm	0.37KW~4.0KW	Φ19(Φ24,Φ28)	Φ35(Φ38)	725N.m	13.0kgs
RV110	RW110	7.5~100	110mm	0.55KW~7.5KW	Φ19(Φ24,Φ28,Φ38)	Φ42	1050N.m	35.0kgs
RV130	RW130	7.5~100	130mm	0.75KW~7.5KW	Φ24(Φ28,Φ38)	Φ45	1550N.m	48.0kgs
RV150	RW150	7.5~100	150mm	2.2KW~15KW	Φ28(Φ38,Φ42)	Φ50		84.0kgs

###

GMRV	A	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	I	M	N	O	P	Q	R	S	T	BL	β	b	t	V
030	80	97	54	44	14	55	32	56	63	65	29	55	40	57	30	75	44	6.5	21	5.5	M6*10(n=4)	0°	5	16.3	27
040	100	121.5	70	60	18(19)	60	43	71	78	75	36.5	70	50	71.5	40	87	55	6.5	26	6.5	M6*10(n=4)	45°	6	20.8(21.8)	35
050	120	144	80	70	25(24)	70	49	85	92	85	43.5	80	60	84	50	100	64	8.5	30	7	M8*12(n=4)	45°	8	28.3(27.3)	40
063	144	174	100	85	25(28)	80	67	103	112	95	53	95	72	102	63	110	80	8.5	36	8	M8*12(n=8)	45°	8	28.3(31.3)	50
075	172	205	120	90	28(35)	95	72	112	120	115	57	112.5	86	119	75	140	93	11	40	10	M8*14(n=8)	45°	8(10)	31.3(38.3)	60
090	206	238	140	100	35(38)	110	74	130	140	130	67	129.5	103	135	90	160	102	13	45	11	M10*16(n=8)	45°	10	38.3(41.3)	70
110	255	295	170	115	42	130	–	144	155	165	74	160	127.5	167.5	110	200	125	14	50	14	M10*18(n=8)	45°	12	45.3	85
130	293	335	200	120	45	180	–	155	170	215	81	179	146.5	187.5	130	250	140	16	60	15	M12*20(n=8)	45°	14	48.8	100
150	340	400	240	145	50	180	–	185	200	215	96	210	170	230	150	250	180	18	72.5	18	M12*22(n=8)	45°	14	53.8	120

Worm reducer gearbox – What You Need to Know

When shopping for a Worm reducer gearbox, it is important to consider the functions and features of the unit. It is also important to take into account its cost. We will take a look at the different types of worm reducer gearboxes and the applications that they can be used for. This will help you choose the right unit for your application.

Features

Worm gears are popular in instruments that require fast stopping, such as elevators and lifts. Their soft materials allow them to absorb shock, which reduces the likelihood of failure. They are also beneficial in heavy-duty machines, such as rock crushers. Some manufacturers offer special worms with zero backlash and high-accuracy reduction.The worm reducer gearbox has a variety of features, including an axial pitch and a circular pitch. The axial pitch of the worm must match the circular pitch of the larger gear. Its threads are left or right-handed, and its lead angle is the distance a point on the thread travels during a revolution of the worm.The worm gear reducer gearbox is widely available, and gear manufacturers typically maintain a large inventory of them. Because worm gears are standardized, their mounting dimensions are generally uniform across manufacturers. This means that choosing one will not require you to change the height, length, or diameter of the output shaft. Worm gear reducer gearboxes also have dimensional consistency.Worm gears are very efficient. They have a high load capacity and a low friction coefficient. The worm gears also have a precise tooth profile, which reduces speed fluctuations and allows for quiet operation.

Functions

Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer gearbox to function properly.Another important feature of a worm reducer gearbox is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer gearbox’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer gearbox can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.

Applications

This market report analyzes the Worm reducer gearbox market from a global perspective. It includes a comprehensive analysis of the current market trends and future growth prospects. It also provides information about the competitive landscape and the main players in the industry. The report also highlights the key factors affecting the growth of the Worm reducer gearbox market.
The major regional markets for the Worm reducer gearbox include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
worm reducer

Cost

Cost is an important consideration when selecting a worm reducer gearbox. The initial cost of a worm gear reducer gearbox is considerably lower than other types of gear reducer gearboxes. Worm gear reducer gearboxes are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer gearbox.Stainless steel worm gear reducer gearboxes from Agknx offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducer gearboxes are available in stock from all six of Agknx’s regional warehouses. They also come with free prepaid freight.Worm gear reducer gearboxes are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducer gearboxes are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.

aspect

Worm reducer gearboxes vary in size. They have one, two or more threads. Each thread has a lead angle. A high ratio has more teeth than a low gear, and a low ratio has fewer teeth. These differences are the result of gearing. The size of the worm gear reducer gearbox should be selected according to the specific application.The worm gear reducer gearbox saves space and provides more torque. Agknx Gearbox has created a variety of models to overcome common deceleration challenges, from standard to hygienic markets. The superior transmission Agknx range is designed to solve common deceleration challenges and expand to meet the needs of the sanitary industry.The diameter of the worm reducer gearbox is an important consideration. Its diameter should be equal to or slightly larger than the diameter of the grinding wheel or tool. This will affect the pressure angle. The pressure angle on a worm reducer gearbox depends on several factors, including its diameter and lead angle. The diameter of the grinding wheel or tool also has an effect on the profile of the worm.Worm gear reducer gearboxes are common. Many gear manufacturers have large stocks of these gear reducer gearboxes. Since gears are standardized, the mounting dimensions of worm gears are also common among manufacturers. This makes it easy to select a worm gear reducer gearbox for your application. In addition, the worm gear reducer gearbox is easy to install and maintain.
worm reducer

Worm gear reducer gearbox oil

Worm gear reducer gearboxes usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer gearbox must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer gearbox must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducer gearboxes are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducer gearboxes require less frequent oil changes than other types of gear reducer gearboxes. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.

China Three Phase 0.06-15kw AC Right Angle Gear Motor Worm Gearbox with Hot selling
editor by CX 2023-04-14

Item Description

The major products
induction motor/reversible motor/DC brush gear motor/DC brushless equipment motor/CH/CV large gear motors/Planetary equipment motor/Worm equipment motor and many others.

Software
production pipelines, transportation, food, drugs, printing, material, packing, workplace, apparatus, amusement, and so forth, and is the preferred and matched solution for the automated machine.

Be aware
Specs for reference only. Shaft dimension and specs(voltage,torque,speed,and many others) can be CZPT ized

Stick to-up
We have CE and UL certification. And we have exported to United kingdom, Germany, Australia, Usa, Canada, Korea, Norway and so on. And nicely recognized for the world.

DC Blushless Equipment CZPT
G	2	BLD(P)	40	220	GN	30S
Company Code	Mounting Flange	Motor Type	Output CZPT	Voltage	Shape of CZPT Shaft	Motor CZPT
G – CZPT	2-60mm three-70mm 4-80mm five-90mm 6-100mm	BLD – Brushless motor with square gearbox BLDP – Brushless motor with planetary gearbox	10 – 10W fifteen – 15W 25 – 25W 40 – 40W sixty – 60W ninety – 90W 200 – 200W four hundred – 400W	24 – DC24V 36 – DC36V forty eight – DC48V 110 – DC110V 220 – DC220V	GN – General CZPT val Equipment GU – Bolstered CZPT val Gear A1 – Milling Keyway A – Flat type	15S – 1500RPM 18S – 1800RPM 25S – 2500RPM 30S – 3000RPM
Gearbox
2	GN	fifty		RT
Model & Dimension	Equipment Variety	Reduction Ratio		Bearing Kind
2: 60mm 4: 80mm five: 90mm six: 104mm	GN: Basic CZPT cal Gear GU: Reinforced CZPT cal Gear	fifty: Reduction Ratio 1:50 10X Denotes The Mid-gearbox Ration 1:ten		RT – Right CZPT le RC – Right-Angle Hollow
five	GFS	one hundred		K		twenty
Product & Dimension	Equipment Kind	Reduction Ratio		Bearing Type		Out-shaft Diameter
two: 60mm four: 80mm 5: 90mm 6: 100mm	Flat Bins Hollow Output	one hundred The reduction ratio of reducer can be mentioned speed ratio range, for example, 50-seventy five, could also be a separate ratio, for instance 100		K: common rolling bearing H: sliding bearing L: axle variety Z: hybrid bearings		20: Φ20mm

Motor Overall performance Parameters
Design	Voltage		No-load Present				No-load CZPT			Rated CZPT		Rated Recent		Rated CZPT			Rated Torque		Quality CZPT
	V		A				RPM			W		A		RPM			N.m		IP
G2BLD25-24GN-30S	24		MAX .four				3200			25		1.3		3000			0.08		44
G2BLD25-36GN-30S	36		MAX .three									0.9
G2BLD25-48GN-30S	48		MAX .two									0.seven
Motor Design
Type	Pinion Shaft										Round Shaft
Direct Wire	G2BLD200-24GN-30S										G2BLD200-24A1-30S
	G2BLD200-36GN-30S										G2BLD200-36A1-30S
	G2BLD200-48GN-30S										G2BLD200-48A1-30S
Parallel Shaft Gearhead (Bought Individually)
Gearhead Type	Gearhead Model										Equipment Ratio
Lengthy Life, Lower Sound	2GN/GU _ RC/RT										3, 3.6, 5, 6, 7.5, 9, 12.5, fifteen, eighteen, twenty five, 30, 36, 50, sixty, seventy five, 90, 100, a hundred and twenty, 150, one hundred eighty, two hundred
	2GN10XK ( Decimal Gearhead )
Allowance Torque Device: Upside (N-m) / Belowside (kgf.cm)
Gear Ratio	three	three.6	five	6	7.5	9	12.5	fifteen	18	25	thirty	36	50	sixty	75	ninety	a hundred	120	150	one hundred eighty	two hundred
r/min Output Shaft CZPT	one thousand	830	600	five hundred	400	330	240	two hundred	166	a hundred and twenty	one hundred	eighty three	sixty	50	40	33	thirty	25	20	16	fifteen
GU Allowance Torque N·m	.19	.23	.32	.38	.forty eight	.58	.81	.87	1.16	1.forty four	one.seventy three	2.07	two.fifty two	3	3	three	3	3	3	3	3

FAQ
Q: How about your organization?
A: We are a equipment motor factory set up in 1995 and found in HangZhou town of CZPT .
     We have a lot more than 1200 employees. Our main solution is AC micro equipment motor 6W to 250W,
     AC small gear motor 100W to 3700W, brush DC motor 10W to 400W, brushless motor10W to 750W,
     drum motor 60W to 3700W, planetary gearbox,and CZPT box,and many others.

Q: How about your good quality manage?
A: From uncooked material to concluded items, we have rigorous and comprehensive IPQC.
     And the CZPT d examination-ing device can assure of experienced merchandise delivered.

Q: How to pick a appropriate motor?
A: If you have gear motor photos or drawings to present us,
    or you notify us detailed specs like volt-age, velocity, torque, motor dimension, the doing work product of the motor, necessary lifetime and sounds level, and so on.
    please do not be reluctant to let us know, then we can advise a suitable motor per your ask for.

Q: Can you make the gear motor with CZPT izing specifications?
A: Yes, we can CZPT ize for every your ask for for the voltage, velocity, torque, and shaft measurement and shape.
     if you need further wires or cables soldered on the terminal or need to have to add connectors, or capacitors, or EMC we can make it also.

Q: What is your lead time?
A: Typically CZPT typical normal product will require 10-15days, a little bit CZPT er for CZPT ized items.
     But we are very versatile on the direct time, it will rely on the specific orders.

Q: What is your MOQ?
A: If shipped by sea, the minimal get is 100 items, if supply by convey, there is no limit.

Q: Do you have the product in inventory?
A: l am sorry we do not have the merchandise in stock, All items are created with orders.

Q: How to speak to us?
A: You can send out us an inquiry.

The worm equipment is composed of a worm and a worm wheel. It is the simultaneous top offset of vertical energy transfer. Generally, the generate component is a worm. In buy to blend the wheel/worm into a worm equipment, it is essential to guarantee that the middle distance is equivalent and the transmission ratio is equal. Heart distances are available from stock in tiny steps between 17mm and 80mm. Every centre distance has several gear ratios. The severe strain worm gear is suited for the manufacturing of worm equipment drives with a shaft angle of 90°. Making use of a worm travel, very huge reduction ratios (up to 100:1) can be reached.
china Cost Gpg DC Brushless Gear Motor with Right Angle Hollow Gearbox /with Ear Geabox G4bld 200W 24V 1800 4gn100RC manufacturers

Product Description

design	Quantity of poles	Stage	Rated voltage	Rated speed	Continuous locked-rotor torque	Rated torque	Rated CZPT	Peak torque
Models			VDC	RPM	N.m	N.m	W	N.m
42BYA075B030C-02	four	3	24	3000	.192	.16	fifty	.forty eight

model	Peak recent	Torque consistent	Back EMF	Motor length	Motor duration	voltage assortment	Assortment of rotation	excess weight
Units	A	Nm/A	V/KRPM	g.cMoment of inertia	mm	VDC	RPM	Kg
42BYA075B030C-02	9.six	.05	3.947	fourteen.six	134	24~48	one thousand~3000	1.0

Item Parameters

Peaceful secure and dependable for CZPT lifestyle operation

one.Voltage: 24 VDC
two.Number of phases: 3
3.Number of ranges: 4
four.Line-to-line resistance: 1.45±10%ohms
5.Line-to-line inductance: 1.27±20%mH
six.Rated existing: 3.2A
7.Rated CZPT : 50W
eight.No-load velocity: 4300 rpm
9.Insulation course: B
ten.Reduction ratio: 1:58.22
eleven.Output torque: 7.5 N.m
twelve.Output pace: 51.5 rpm
thirteen.We can layout the specific voltage and shaft and so on

The lubricating oil exterior circulation gear of the worm gear reducer gear has minimal oil temperature. The worm equipment reducer strategies to traverse its electrical power. The worm equipment is made of non-ferrous steel. Learn data worms are normally produced of difficult steel. Consequently, making use of a whole lot of warmth in the application, coupled with the influence of the ambient temperature, it is challenging to manage the temperature of the reducer. Use inside the temperature range. When the ambient temperature is lower than 0℃, the functioning temperature of the worm equipment reducer ought to be controlled at -40℃~40℃. It is recommended to heat or use a low freezing stage lubricant prior to the oil is entirely dissolved.
china sales Brushless DC Gear Motor Circular Shaft Ear Flat Screw Hole Through Hole Right Angle Hollow Solid Worm Gearbox manufacturers

Product Description

Tranquil stable and reputable for CZPT existence operation

Motor sort	63ZYT-one hundred twenty five-24
Security quality	IP50
Responsibility cycle	S1 (100%)
Rated voltage	24	V
Rated current	4.9	A
Input CZPT	117.6	W
No-load current	.4	A
Rated torque	.27	Nm
Rated pace	3300	±10% rpm
Rated output CZPT	93.3	W
Friction torque	2	Ncm
performance	80%
Maximum torque	one.three	±10% Nm
Highest current	23	A
No-load velocity	3650	±10% rpm
Optimum CZPT	245	W
Optimum shell temperature	85	ºC
Bodyweight	1.seven	Kg

Planetary CZPT	F1130
Safety quality	IP65
Reduction ratio	710.5:one
Rated torque	one hundred twenty	Nm
Greatest torque	one hundred eighty	Nm
Ambient temperature	-20 to 85	ºC
Grease Intelligent	Smart top 28
Grease temperature assortment	-20 to 160	ºC

The travel component is a worm. In buy to merge the wheel/worm into a worm equipment, it should be ensured that the heart distance is equal and the transmission ratio is equivalent. Centre distances are accessible from inventory in modest methods amongst 17mm and 80mm. Each heart distance has multiple gear ratios. Ep worm gears are appropriate for the production of worm drives with a shaft angle of 90°. Utilizing a worm generate, very massive reduction ratios (up to one hundred:1) can be reached.
china supplier Brush DC Motor DC with Right Angle Worm Gearbox Motor manufacturers

Product Description

Worm Equipment Gearbox Motor CZPT Wheel Winch Box Assembly Correct CZPT le Nmrv CZPT Metal NEMA Interchange Transmission Elements CZPT Tiny Worm Equipment Gearbox

How does a CZPT perform?
How Worm Gears Work. An electric powered motor or motor applies rotational CZPT by way of to the worm. The worm rotates from the wheel, and the screw face pushes on the tooth of the wheel. The wheel is pushed towards the load.

Can a CZPT go equally instructions?
Worm drives can go either route, but they need to be designed for it. As you can picture, turning the worm shaft beneath load will generate a thrust alongside the axis of the screw. Nevertheless, if you reverse the path the direction of thrust will reverse as properly.

The simple construction of the CZPT reducer is primarily composed of the CZPT , the shaft, the bearing, the box human body and its add-ons. Can be divided into a few simple structural elements: box, CZPT , bearing and shaft mix. The box is the foundation of all the add-ons in the CZPT reducer. It is an crucial component that supports the mounted shaft components, ensures the appropriate relative situation of the transmission parts and supports the load performing on the reducer. The primary operate of the CZPT is to transmit the movement and CZPT amongst the two staggered shafts.

Worm gears are proper angle drives that give huge gear ratios with fairly short center-to-middle distances from 1/4″ to eleven”. When properly put in and lubricated, they serve as the quietest, smoothest-managing gear sort. Simply because worm gear drives can attain high equipment ratios, maximum reduction can be achieved in a scaled-down room than a lot of other sorts of equipment drives. The worm and worm equipment run at a 90° angle on non-intersecting axes.
china price Worm Gear Gearbox Motor Drive Wheel Winch Box Assembly Right Angle Nmrv Stainless Steel NEMA Interchange Transmission Parts Industrial Small Worm Gear Gearbox manufacturers

Product Description

Merchandise Description

Main CZPT :
1)housing:aluminium alloy ADC12(measurement 571-090) die forged iron HT200(measurement 110-one hundred fifty)
2)Worm:20Cr, ZI Involute profile carbonize&quencher heat treatment method make equipment area hardness up to 56-62 HRC Following precision grinding, carburization layer’s thickness between .3-.5mm.
3)Worm Wheel:wearable stannum alloy CuSn10-one

In depth Pictures

Blend Possibilities:
Input:with enter shaft, With sq. flange,With IEC common input flange
Output:with torque arm, output flange, one output shaft, double output shaft, plastic cover
Worm reducers are CZPT with diffferent combinations: NMRV+NMRV, NMRV+NRV, NMRV+Personal computer, NMRV+UDL, NMRV+MOTORS

Exploded See:

Solution Parameters

Previous Model	New Model	Ratio	Center Distance	Electrical power	Enter Dia.	Output Dia.	Output Torque	Bodyweight
RV571		7.5~100	25mm	.06KW~.12KW	Φ9	Φ11	21N.m	.7kgs
RV030	RW030	7.5~one hundred	30mm	.06KW~.25KW	Φ9(Φ11)	Φ14	45N.m	one.2kgs
RV040	RW040	7.5~one hundred	40mm	.09KW~.55KW	Φ9(Φ11,Φ14)	Φ18(Φ19)	84N.m	2.3kgs
RV050	RW050	seven.5~one hundred	50mm	.12KW~1.5KW	Φ11(Φ14,Φ19)	Φ25(Φ24)	160N.m	three.5kgs
RV063	RW063	7.5~a hundred	63mm	.18KW~2.2KW	Φ14(Φ19,Φ24)	Φ25(Φ28)	230N.m	six.2kgs
RV075	RW075	seven.5~100	75mm	.25KW~4.0KW	Φ14(Φ19,Φ24,Φ28)	Φ28(Φ35)	410N.m	9.0kgs
RV090	RW090	7.5~100	90mm	.37KW~4.0KW	Φ19(Φ24,Φ28)	Φ35(Φ38)	725N.m	thirteen.0kgs
RV110	RW110	seven.5~a hundred	110mm	.55KW~7.5KW	Φ19(Φ24,Φ28,Φ38)	Φ42	1050N.m	35.0kgs
RV130	RW130	seven.5~a hundred	130mm	.75KW~7.5KW	Φ24(Φ28,Φ38)	Φ45	1550N.m	forty eight.0kgs
RV150	RW150	7.5~one hundred	150mm	2.2KW~15KW	Φ28(Φ38,Φ42)	Φ50		84.0kgs

GMRV Outline Dimension:

GMRV	A	B	C	C1	D(H8)	E(h8)	F	G	G1	H	H1	I	M	N	O	P	Q	R	S	T	BL	β	b	t	V
030	80	ninety seven	fifty four	forty four	14	55	32	fifty six	63	sixty five	29	55	40	57	thirty	75	44	six.five	21	5.5	M6*10(n=4)	0°	5	16.three	27
040	100	121.five	70	60	18(19)	60	forty three	71	78	75	36.5	70	fifty	seventy one.5	forty	87	fifty five	six.five	26	6.5	M6*ten(n=4)	45°	6	twenty.8(21.8)	35
050	one hundred twenty	a hundred and forty four	80	70	twenty five(24)	70	49	85	ninety two	eighty five	43.5	eighty	60	eighty four	50	one hundred	sixty four	eight.five	thirty	seven	M8*12(n=4)	45°	eight	28.3(27.3)	40
063	a hundred and forty four	174	a hundred	85	twenty five(28)	eighty	sixty seven	103	112	95	fifty three	ninety five	72	102	63	a hundred and ten	eighty	eight.five	36	8	M8*twelve(n=8)	45°	8	28.3(31.3)	50
075	172	205	120	ninety	28(35)	95	72	112	one hundred twenty	115	fifty seven	112.5	86	119	seventy five	a hundred and forty	ninety three	11	forty	10	M8*fourteen(n=8)	45°	eight(ten)	31.3(38.3)	sixty
090	206	238	140	a hundred	35(38)	one hundred ten	seventy four	130	a hundred and forty	one hundred thirty	67	129.five	103	135	90	160	102	thirteen	forty five	11	M10*sixteen(n=8)	45°	ten	38.3(41.3)	70
a hundred and ten	255	295	a hundred and seventy	a hundred and fifteen	42	a hundred thirty	–	one hundred forty four	a hundred and fifty five	a hundred sixty five	74	one hundred sixty	127.5	167.five	one hundred ten	200	a hundred twenty five	fourteen	fifty	fourteen	M10*18(n=8)	45°	12	forty five.three	85
130	293	335	two hundred	one hundred twenty	forty five	180	–	one hundred fifty five	a hundred and seventy	215	81	179	146.5	187.five	a hundred thirty	250	a hundred and forty	16	sixty	fifteen	M12*twenty(n=8)	45°	fourteen	forty eight.8	one hundred
a hundred and fifty	340	400	240	145	50	one hundred eighty	–	185	200	215	ninety six	210	170	230	one hundred fifty	250	180	eighteen	72.5	18	M12*22(n=8)	45°	fourteen	53.eight	120

Organization Profile

About CZPT Transmission:
We are a professional reducer maker situated in HangZhou, ZHangZhoug province.
Our foremost items is full variety of RV571-a hundred and fifty worm reducers , also equipped GKM hypoid CZPT cal gearbox, GRC inline CZPT cal gearbox, Personal computer units, UDL Variators and AC CZPT s, G3 CZPT cal gear motor.
Goods are broadly utilized for programs these kinds of as: foodstuffs, ceramics, packing, substances, pharmacy, plastics, paper-making, construction equipment, metallurgic mine, environmental security CZPT , and all varieties of automatic traces, and assembly strains.
With CZPT shipping, excellent following-sales service, CZPT d generating facility, CZPT merchandise promote well both at property and abroad. We have exported CZPT reducers to CZPT Asia, CZPT ern CZPT pe and Middle CZPT and so on.Our aim is to produce and innovate on basis of high good quality, and develop a good reputation for reducers.

Packing information:Plastic Baggage+Cartons+Wood Circumstances , or on request
We take part Germany Hannver Exhibition-ZheJiang PTC Reasonable-Turkey Earn Eurasia

Logistics

Soon after Sales Support

one.Upkeep Time and Guarantee:Within one particular year following getting merchandise.
two.Other Support: Such as modeling assortment guide, set up manual, and dilemma resolution information, etc.

FAQ

one.Q:Can you make as for each CZPT er drawing?
A: Indeed, we provide CZPT ized services for CZPT ers accordingly. We can use CZPT er’s nameplate for gearboxes.
two.Q:What is your conditions of payment ?
   A: thirty% deposit before manufacturing,stability T/T ahead of delivery.
3.Q:Are you a trading company or manufacturer?
   A:We are a manufacurer with CZPT d products and skilled workers.
4.Q:What is your manufacturing ability?
   A:8000-9000 PCS/Thirty day period
5.Q:Totally free sample is CZPT or not?
   A:Yes, we can provide free sample if CZPT er concur to shell out for the courier price
six.Q:Do you have any certification?
   A:Indeed, we have CE certification and SGS certificate report.

Make contact with details:
Ms Lingel Pan
For any questions just really feel free ton get in touch with me. A lot of many thanks for your type focus to CZPT business!

The lubricating oil external circulation tools of the worm equipment reducer tools has reduced oil temperature. The worm gear reducer plans to traverse its electrical power. The worm gear is made of non-ferrous metallic. Learn data worms are generally produced of hard steel. Therefore, using a whole lot of heat in the application, coupled with the impact of the ambient temperature, it is hard to handle the temperature of the reducer. Use inside the temperature range. When the ambient temperature is decrease than 0℃, the doing work temperature of the worm gear reducer ought to be managed at -40℃~40℃. It is suggested to warmth or use a reduced freezing stage lubricant prior to the oil is totally dissolved.
china best Flange Input Power Transmission Right Angle Worm Gearbox with Motor manufacturers

Worm gear reducer gearbox

Viscosity

Self-locking function

application

cost

manufacturing

Product Description

Worm gear reducer gearbox

high efficiency

low noise

pocket

Self-locking function

high gear ratio

Advantages and disadvantages of worm gear reducer gearbox

Hollow shaft worm gear reducer gearbox

Multi-head worm gear reducer gearbox

Hypoid Gear Set

Hypoid gear motor

R series worm gear reducer gearbox

AGKNX Electric Worm Gear reducer gearbox

Merchandise Description

Worm reducer gearbox – What You Need to Know

Features

Functions

Applications

Cost

aspect

Worm gear reducer gearbox oil

Item Description

Product Description

Product Description

Product Description

Product Description