Product Description
The Best Quality ATA Series Shaft Mounted Gearbox Manufacturers
Components:
1. Housing: Nodular Cast Iron(Ductile Iron) QT600
2. Gears Profile: Hardened Helical Gears
3. Gears Material: 20CrMnTi
4. Gears Processing: Carburizing, Quenching, Grinding
5. Gears Hardness: Surface Hardness: HRC58-62, Inner Hardness: HBS156-207
6. Gears Accuracy: 6 Class
7. Shafts Material: 40Cr
8. Input Configurations:
Keyed CZPT Shaft Input
IEC Normalized Motor Flange
9. Output Configurations:
Keyed Hollow Shaft Output
10. Oil Seal: ZheJiang SOG
11. Bearings: NSK, HRB, ZWZ, LYC
12. Spare Parts: Torque arm, Optional Backstop
The features of ATA shaft mounted gearbox:
Mounting Type: Tie rod Hanging shaft mounted
Output Shaft: Single key hollow shaft, each model can select 3 hollow diameter at most.
Gearbox Housing: Hard Iron Steel, can be used outside.
Anti-slip device: Can suit for any model, It’s very convenient to be mounted.
The maintenance of ATA shaft mounted gearbox:
1. Before starting the reducer must be filled of N159 or N220 extreme pressure industrial gear oils, till the gearbox oil shows an intermediate position
2. After 3 months running, the gearbox need to change oil, attention it must be debris inside the machine rinse before adding new oil.
3. At the reducer hollow shaft ends and drive pulley end gland plate must fastened with locking screws.
4. The reducer pulley and the motor pulley must be parallel when they are installed and the belt tightness should be moderate.
| Rated Power |
1.1~193KW |
| Intput Speed |
500~1400r/min |
| Output Speed |
25~300r/min |
| Ratio |
IN=5.0…31.5 |
| Installation Form |
Shaft mounted |
The models of ATA shafted mounted gearbox:
1 Stage: ATA30, ATA35, ATA40, ATA45, ATA50, ATA60, ATA70, ATA80, ATA100, ATA125
2 Stage: ATA35D, ATA40D, ATA45D, ATA50D, ATA60D, ATA70D, ATA80D, ATA100D, ATA125D
Gearbox Parameters:
| Models | Output Bore Dia. | Maximum Torque | Nominal Ratio(i) |
| ATA30 | 30mm | 180Nm | 5
7 10 12.5 15 20 25 31 |
| ATA35 | 35mm | 420Nm | |
| ATA40 | 40mm/45mm | 950Nm | |
| ATA45 | 45mm/50mm/55mm | 1400Nm | |
| ATA50 | 50mm/55mm/60mm | 2300Nm | |
| ATA60 | 60mm/70mm | 3600Nm | |
| ATA70 | 70mm/85mm | 5100Nm | |
| ATA80 | 80mm/100mm | 7000Nm | |
| ATA100 | 100mm/125mm | 11000Nm | |
| ATA125 | 125mm/135mm | 17000Nm |
Product pictures:
Product application:
Our company :
Customer visiting:
Our Services:
| Pre-sale services | 1. Select equipment model. |
| 2.Design and manufacture products according to clients’ special requirement. | |
| 3.Train technical personal for clients | |
| Services during selling | 1.Pre-check and accept products ahead of delivery. |
| 2. Help clients to draft solving plans. | |
| After-sale services | 1.Assist clients to prepare for the first construction scheme. |
| 2. Train the first-line operators. | |
| 3.Take initiative to eliminate the trouble rapidly. | |
| 4. Provide technical exchanging. |
FAQ:
1.Q:What kinds of gearbox can you produce for us?
A:Main products of our company: UDL series speed variator,RV series worm gear reducer, ATA series shaft mounted gearbox, X,B series gear reducer,
P series planetary gearbox and R, S, K, and F series helical-tooth reducer, more
than 1 hundred models and thousands of specifications
2.Q:Can you make as per custom drawing?
A: Yes, we offer customized service for customers.
3.Q:What is your terms of payment ?
A: 30% Advance payment by T/T after signing the contract.70% before delivery
4.Q:What is your MOQ?
A: 1 Set
If you have any demand for our products please feel free to contact me
| Application: | Motor, Machinery |
|---|---|
| Function: | Speed Changing, Speed Reduction |
| Layout: | Parallel |
| Hardness: | Hardened |
| Installation: | Torque Arm Type |
| Step: | Single-Step |
| Customization: |
Available
|
|
|---|
Is a worm gear reducer gearbox right for your application?
If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
This is a reducer gearbox
Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.
Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
It is high efficiency
When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.
It has a low clearance
Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
It has a high torque to weight ratio
The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.
editor by CX 2023-05-25
china sales Vf Type Worm Shaft Input Worm Gear Boxes Motor Unit manufacturers
Product Description
Vf Type Worm Shaft Enter Worm Equipment Bins CZPT Unit. CZPT proper angle worm reducers size thirty,forty four,49,sixty three,seventy two,86,110,130 & 150.Manufactured in aluminium circumstance from 30-seventy two size and cast iron for 86,one hundred ten,one hundred thirty & 150.Satisfactory CZPT .06KW to 15KW. Kinds of choice mounting: torque arm, toes mounting, output flange, output shaft, double-phase.
RICHMAN CZPT ERSAL SOURCING CO Restricted is found in HangZhou ZheJiang . With far more than twenty many years experience in gear transmission region, we have CZPT owned manufacturing unit and merchandise traces. Worm reducer (WP sequence RV sequence VF series), screw jack reducer (WSH sequence) and CZPT cal gearbox (K,S,R,F sequence) are recent mainly items. Rigorous and precision top quality management procedure helps make the ultimate items meet calls for of CZPT CZPT ers.
We attempt to produce different markets, cooperate with kinds of CZPT ers, which can helps make us maintain shifting forward, keep revolutionary and global vision. Richman CZPT CZPT is your ideal spouse of transmission resolutions.
The advised materials for the worm are hardened metal and bronze for the worm equipment. Nonetheless, dependent on the software, unhardened steel worms can operate adequately and a lot more economically on cast iron worm gears rated at fifty%. In addition to steel and hardened steel, worms are obtainable in stainless metal, aluminum, bronze, and nylon worm gears are accessible in metal, hardened steel, stainless metal, aluminum, nylon, and non-metallic (phenolic).
china supplier Stainless Steel Long Master Worm Gear Drive Shaft Wheel manufacturers
Product Description
Stainless Steel CZPT CZPT Worm Equipment CZPT Shaft Wheel
Product standard description
| Approach | Investment decision CZPT , other approach can be CZPT ized. |
| Content | Alloy steels, Carbon Metal , CZPT steel, Malleable iron , Grey iron, Ductile iron CZPT , Bronze and so forth. |
| Unit CZPT ght | .1kg-100kg |
| Finish | Simple,Nickel Plating , Chrome Plating or Sharpening |
| Application | Automotive ,Mining, Railway, CZPT gear,Mining etc |
| Top quality Control | CMM, Projection CZPT , spectrometer, Hardness tester, Tensile tester etc. |
| Certificate | ISO 9001:2008/PED/TS16949/TUV/AD2000 |
| Normal | ASTM,DIN,ISO,BS,JIS |
Organization Data
HangZhou Xihu (West CZPT ) Dis.kun CZPT s Co.,Ltd is a huge company in CZPT , we are specialised in steel casting, forging, stamping and forging, and we supply goods according to CZPT ers’ diverse drawings and requirements.
We have CZPT personal casting foundry and maching factory , CZPT goods are mostly used in CZPT industries.We can supply many varieties of casting elements/stamping areas/machining components and forging parts.
one. Aluminum casting, sand casting, die casting, gravity casting, high stress die casting, low stress die casting, forging, stamping, machining.
two. Applied software program for specification drawings: CZPT CAD, Solidworks.
three. Precision machining: CNC, milling machine, drilling machine, numerical lathe, all kinds of lathe.
four. Surface end method: sprucing, sand blasting, warmth therapy, portray, powder coating, anodizing, electroplating, mirror sharpening.
5. Good high quality and stringent shipping time.
We can study CAD, E-drawing and Pro-E files and use CAD as assistant style for CZPT ers. Staffs of DK metals are composed of experienced engineers, metallurgist and specialist salesmen with CZPT track record.DK has powerful high quality assurance capacity. We have in-house CMM, Spectrometer, 2-D projection equipment, Roughness tester, Hardness tester, Thickness tester, NDT inspection machines and dozens of standard inspection equipment.
We deeply know quality is important problem of CZPT goods. DK is an ISO9001:2008 accredited company. Our factories are primarily ISO9002, QS9000 or ISO/TS16949 qualified. Besides for inner handle of CZPT factories, DK metals is also involved in QC procedure of products that we produced.We appreciate a great track record in machinery filed and CZPT merchandise are quite well-known all more than the globe.
The lubricating oil exterior circulation equipment of the worm equipment reducer equipment has minimal oil temperature. The worm gear reducer ideas to traverse its electricity. The worm gear is manufactured of non-ferrous metal. Master information worms are typically made of tough metal. For that reason, utilizing a great deal of heat in the application, coupled with the impact of the ambient temperature, it is tough to management the temperature of the reducer. Use inside the temperature variety. When the ambient temperature is reduced than 0℃, the working temperature of the worm equipment reducer ought to be managed at -40℃~40℃. It is advisable to warmth or use a lower freezing level lubricant before the oil is entirely dissolved.
china sales Hot Forging CNC Turning and Milling Worm Shaft manufacturers
Solution Description
Your CZPT ized areas,Tailored answers
Firm profiles
We established in 2571 year, named Xihu (West CZPT ) Dis. Tongyong Machinery Company. In 2019 renamed HangZhou Hejess Machinery Co.,Ltd and established new plants.
We are mostly engaged in the designing and manufacturing of metal equipment factors and CZPT -common machinery areas, which includes shafts, flange, gears, rings, sheaves, couplings, bearing supports, and forgings and so on.
Generation Parameter
- Substance: Alloy steel,Carbon metal,Carburizing metal,Quenched and tempered steel
- Warmth treatment method: Normalizing,Annealing,Quenching&Tempering,Surface Quenching, Induction hardening
- Machining: CNC Turning,CNC Milling,CNC CZPT ng,CNC Grinding,CNC Drilling
- Gear Machining: Gear Hobbing,Equipment Milling,CNC Gear Milling,Gear Slicing,Spiral equipment reducing,
- Gear Slicing
- Inspection: CZPT Composition Take a look at,Ultrasonic Test,Penetration Test,Radiographic Examination,
Magnetic Check,Tensile CZPT Examination,Affect Examination,Hardness Take a look at,Dimension Examination.
We can supply forging from 1kg to 5Ton. And make precison machining. Also have welding and assembly capabilities.
Quality Management
Solution high quality is what we are paying out excellent attention to all the time. Each merchandise is made under careful handle at each and every method and inspected by skilled engineers strictly in accordance to the related specifications and CZPT er specifications, making certain the super efficiency of CZPT items when arrive at CZPT er.
Ø Manufacturing Flow Chart
one, Get Analyzing
Know needs of uncooked materials, chemical composition, CZPT qualities.
Analyzing how to forging and how to make heat treatment.
two, Uncooked substance.
Use which raw material, plate, spherical bar, steel ingot.
According your components, choose the very best expense efficiency one.
If you required special material, will CZPT ized from steel manufacturing unit.
Customized raw content in accordance your requirments.
three, Forging
Make forging procedure chart and forging sort
Make forging drawing
Make 3D drawing
Make forging mould
four, Pre – forging
5, Finish – forging
Natural gasoline heating furnaces are monitored and controlled by computer programs to ensure exact heating inside of set time and temperature range as necessary.
A wide range of forging products,like friction press, hudraulic hammer, forging hammers.With the aids od smart application,appropriate deformation,forging ration,ingot dimension and bodyweight,forging tooling and equipment will be identified to make sure the wrought framework via hout and audio top quality.
six, Pre- machining
7, Make UT (ultrasonic) inspection.
8, Make warmth remedy
nine, Examine hardness and mechanical homes.
10, Make precision machining / finished machining.
Use CNC machining heart, CNC milling, CNC uninteresting, CNC grinding
11, Inspect dimenssions.
twelve, Safeguarding and packing.
Principal market : America, Australia, Malaysia,Israel,Britain, Russia,Canada, ect.
Solutions : The services we can provide are : FOB, CIF, DAP. Only give me the drawings and requirements, you will receive the goods at your home.
Wehas accumulated rich knowledge and experience in the producing and exporting. Familar every process, when metting problems, be able to find a solution timely.
Excellent services frame of mind, CZPT reaction velocity, on-time shipping and delivery, consciousness of responsibility and versatility is what we are working towards from the extremely starting, combining with substantial credit rating, competitive cost, near conversation with CZPT er and innovative way of functioning, make us earn far more and more organization and exceptional CZPT er pleasure.
To select us, HangZhou CZPT CZPT ry, as your company associate, never will you uncover you are wrong!
Production Details
| Engineering : | Totally free forging / CZPT forging / Die forging / closed forging / Impact die forging / Flashless forging / multi-ram forging / multidirectional die forging / precision forging / croe forging / combination forging / extrusion forging / roll forging / reducer rolling / ring rolling / open die forging / flat die forging / loose tooling forging |
| Content Common : | ISO / DIN / W-Nr / BS / EN / ASTM / ASME / AISI / UNS / SAE / JIS / SS/ NF / GOST / OCT / GB |
| Content Variety: | Austenilic Ni-Cr CZPT Steel / Austenitic Alloy Metal / Austenitic CZPT Stee / Axle Shaft Steel / Bar Steel / CZPT Steel / Bolting Steel / Carbon And Lower-Alloy Metal Vessels / Carbon Metal / Carbon Instrument Steel / Carbon-Containing Alloy Steel / Case-Hardened Steel / Solid Steel / Forged-Steel Pipe / Centrifugal Steel / Centrifuge(D) Steel / Channel Steel / Chilled Hardened Steel / Chrome Hardened Metal / Chrome-Carbon Steel / Chrome-Molybdenum Metal / Chrome-Nickel Metal / Closed Die Metal / Coating Metal Pipe / Die Steel / Drawing Metal / Added-Large-Tensile Metal / Fabricated Steel / Ferritic CZPT Steel / Ferritic Metal / Figured Metal / Wonderful Steel / Flange Metal / Groove Metal / Difficult Alloy Metal / High Alloy Metal / CZPT Boron Metal / CZPT Carbon Steel / CZPT Chrome Alloy Steel / CZPT Manganese Metal / CZPT Nickel-Chrome Steel |
Show the creation approach as underneath photos:
Our Goods Catalogue
| Products Catalogue | |||||
| Item | Application | Technological | Materials | Photograph | Industry |
| 1 | Elevate Rod | Forging – warmth therapy – CNC machining – CNC Grinding | Alloy metal | Australia | |
| 2 | Eccentric shaft | Forging – heat treatment – CNC machining – CNC Grinding | Alloy metal | Britain | |
| three | Pin shaft | Forging – heat therapy – CNC machining | Alloy steel | United states | |
| four | Spindle | Forging – heat remedy – CNC machining – CNC Grinding | Alloy steel | Germany | |
| five | Action shaft | Forging – heat treatment method – CNC machining | Alloy steel | Peru | |
| 6 | Lengthy shaft | Forging – heat remedy – CNC machining – CNC Grinding | Alloy steel | Ukraine | |
| seven | Large head shaft | Forging – heat therapy – CNC machining | Alloy steel | Israel | |
| 8 | Hollow shaft | Forging – heat treatment method – CNC machining | Custom made Alloy metal | Singapore | |
| 9 | Zinc plating flange | Forging – warmth treatment – CNC machining – Zinc plating | Alloy steel | Australia | |
| ten | Spline shaft | Forging – heat remedy – CNC machining | Alloy metal | Singapore | |
| 11 | Gear Shaft | Forging – heat remedy – CNC machining – Area Quenching | Alloy metal | Russia | |
| twelve | Equipment | Forging – warmth therapy – CNC machining | Alloy steel | Russia | |
| 13 | Ring | Forging – warmth remedy – CNC machining | Alloy metal | Usa | |
| 14 | Ring | Forging – warmth treatment – CNC machining | Alloy steel | Malaysia | |
| 15 | Half ring | Forging – heat therapy – CNC machining | Alloy metal | Malaysia | |
| 16 | Cylinder | Forging – warmth remedy – CNC machining | Alloy steel | Iran | |
| seventeen | Flange | Forging – heat remedy – CNC machining | Alloy steel | United states | |
| 18 | Groove ring | Forging – warmth remedy – CNC machining | Alloy metal | United states of america | |
| 19 | Flange shaft | Forging – warmth treatment – CNC machining | Alloy metal | United states of america | |
| 20 | Flange | Forging – heat therapy – CNC machining | Alloy metal | Usa | |
| 21 | Pin shaft | Forging – warmth treatment – CNC machining | Alloy steel | Usa | |
| 22 | Shaft | Forging – warmth treatment – CNC machining | Alloy steel | Usa | |
| 23 | Square flange | Forging – heat therapy – CNC machining | Alloy metal | USA Britain | |
| 24 | Nut | Forging – heat treatment method – CNC machining | Alloy metal | United states of america | |
| twenty five | Flange | Forging – warmth treatment – CNC machining | Alloy metal | United states of america | |
| 26 | Flange | Forging – heat therapy – CNC machining | Alloy metal | United states of america | |
| 27 | Forks | Wire slicing – heat treatment – CNC machining | Alloy steel | United states | |
| 28 | Closed die forging portion | Forging – CNC machining | Alloy metal | United states of america | |
| 29 | Shut die forging part | Forging – CNC machining | Alloy steel | United states | |
| thirty | Closed die forging portion | Forging – CNC machining | Alloy metal | Usa | |
Worm gears are proper angle drives that supply massive equipment ratios with fairly limited center-to-heart distances from 1/4″ to 11″. When effectively set up and lubricated, they serve as the quietest, smoothest-running gear type. Since worm equipment drives can accomplish high gear ratios, greatest reduction can be achieved in a smaller space than numerous other sorts of gear drives. The worm and worm gear operate at a 90° angle on non-intersecting axes.
china factory Motor Extension Worm Gear Shaft for Hollow Shaft Potentiometer manufacturers
Product Description
1. Description
|
Merchandise title |
304 stainless metal shaft |
|
Material |
Stainless Steel,Aluminum,Brass, Bronze,Carbon metal and ect. environmental safety substance. |
|
Size |
Customized in accordance to your drawing. |
|
Services |
OEM, style, CZPT ized |
|
Tolerance |
+/-.01mm to +/-.005mm |
|
Floor treatment |
Passivation *Sharpening *Anodizing *Sand blasting *Electroplating(colour, blue, white, black zinc, Ni, Cr, tin, copper, silver) *Black oxide coating *Warmth-disposing *Sizzling-dip galvanizing *Rust preventive oil |
|
MOQ |
one piece Copper bushing |
|
Samples |
We can make sample inside 7days free of charge of cost |
|
Certification |
ISO9001:2015 cnc machining turning parts shaft |
|
Payment Phrases |
Financial institution TransferWestern CZPT Paypal Payoneer, Alibaba CZPT Assurance30% deposit & stability prior to shipping. |
|
Delivery time |
Inside of 15-20 workdays after deposit or payment acquired |
|
Shipping Port |
HangZhou 304 stainless steel shaft |
2. Principal CZPT Shafts
three. Operate Circulation
four. Application
5. About US
As the most compact tiny precision gear technique, worm gear sets provide high reduction ratios in a really tiny area. Worm equipment sets transmit movement amongst disjoint correct-angle shafts and give the quietest, smoothest working procedure of any gear type.
china near me Customized OEM Custom Steel Brass Accurate Machining Machined Shaft with Gear Worm Screw manufacturers
Product Description
Our Positive aspects
Our advantange, Reduced MOQ as significantly less as 1 piece, one hundred% inspection, Limited CZPT time.
Our service
We manufacture CZPT shafts manufactured according to drawing, which includes roud shaft, sq. shaft, hollow shaft, screw shaft, spline shaft, gear shaft, etc.
| Materials | Alloy, stainless steel, Carbon steel, and so on. |
| Mahines | NC lathe, Milling macine, Ginder, CNC, Gear milling machine. |
| 3rd get together inspection | Accessible, SGS, CNAS, BV, and many others. |
| UT regular | ASTM A388, AS1065, GB/T6402, and so forth. |
| Packaging | Seaworthy packing |
| Drawing structure | PDF, DWG, DXF, STP, IGS, and so on. |
| Application | Market utilization, CZPT use. |
| MOQ | one piece |
| Drawing structure | PDF, DWG, DXF, STP, IGS, etc. |
| Quotation time | one days. |
| Guide time | Generaly thirty-forty days for mass creation. |
Our Merchandise
Throughout the go ten years, we have supplied hundreds of CZPT ers with perfect precision machining employment:
Workshop & machining method
We manufacture CZPT shafts manufactured according to drawing, like roud shaft, square shaft, hollow shaft, screw shaft, spline shaft, equipment shaft, and many others.
FAQ
Q: Are you treading organization or manufacturer?
A: We are maker.
Q: How about your MOQ?
A: We offer both prototype and mass generation, Our MOQ is 1 piece.
Q:How CZPT can I get a quote following RFQ?
A:we typically quotation you within 24 several hours. Far more detail info presented will be helpful to save your time.
one) detailed CZPT drawing with tolerance and other necessity.
2) the quantity you demand.
Q:How is your quality ensure?
A:we do 100% inspection just before supply, we are hunting for CZPT expression enterprise relationship.
Q:Can I sign NDA with you?
A:Confident, we will hold your drawing and information confidential.
The travel aspect is a worm. In order to mix the wheel/worm into a worm gear, it should be ensured that the heart distance is equivalent and the transmission ratio is equal. Heart distances are available from inventory in small actions amongst 17mm and 80mm. Every heart distance has multiple equipment ratios. Ep worm gears are suitable for the creation of worm drives with a shaft angle of 90°. Utilizing a worm travel, really big reduction ratios (up to a hundred:1) can be achieved.
china best OEM China Supplier Polished Mild Steel Worm Shaft manufacturers
Solution Description
one.Merchandise Descrition: China Provider Polished Moderate Steel Worm Shaft
Gear shaft processing technological innovation:
one, Blank blanking (carbon steel, stainless steel, stainless iron)
2,Rough CNC
three, Quenching and tempering therapy (to improve the toughness of the equipment shaft and shaft stiffness)
4, CZPT CNC equipment blank to measurement
five, If there is a keyway shaft, initial CNC keyway and so on.
six, Hobbing
7,Tooth floor intermediate frequency quenching (small equipment with higher frequency quenching), quenching hardness HRC48-58. (certain hardness value according to the working situations, load and other elements)
eight,Equipment grinding
9,Closing inspection of completed merchandise
2.Solution Particulars
| Core competence | generate shaft,pump shaft, motor shaft,rotor shaft ,blender shaft and multi -diameter shaft etc precision shaft core. |
| Surface area Treament | Anodizing/ Oxiding/ Zinc plating/ Nickel plating/ Chrome plating/ Silver plating/ Gold plating/ Imitation gold plating/ Sand blasted/ Brushed/ Silk display/ Passivation/ CZPT coating/ Painting/ Alodine/ Heat remedy/ Teflon and so on. |
| Tolerance | +/-.005mm or +/- .0002″ |
| Material | Stainless Metal,Carbon Steel |
| We take care of several other variety of components. Remember to make contact with us if your essential materials is not detailed previously mentioned. | |
| Inspecation Gear | Coordinate measuring machining/ Projector/ Caliper/ Microscope/ Micrometer/ CZPT gauge/ Roughness tester/ Gauge block/ Thread gauge and so on. |
| Top quality Control | 100% inspection |
| Personalized | Yes,all are CZPT ized according clients’ drawings layout or sample |
| Payment Way | T/T, CZPT ern CZPT ,Paypal |
| Packaging | one:Anti-rust oil OPP baggage and cartons for outer offers. |
| two: CZPT er’s necessity. | |
| Shipping | (1)-100kg: specific & air freight precedence |
| (2)>100kg: sea freight priority | |
| (3)As per CZPT ized requirements. |
3.Items processing:
FAQ:
1.Can we get a sample before ordering?
Sure,sample is totally free,you have to shell out freight cost or supply us your firm accumulate couire account variety.tks
two.All products all are CZPT ?
Yes,our specialized in producing and exporting various shafts and pin,all are substantial top quality and CZPT ized in accordance to clients’ drawings or samples.
three.Are you manufacturing facility or a trading company ?
We are manuacturer,and CZPT factory is in HangZhou,china.
welcome to check out us at any time.
4.Why decide on us?
Because we can aid you generate high quanlity and CZPT shaft in accordance to your layout drawing.
welcome to CZPT products whenever.
Positive,competive price tag and great shipping time service
Particular pitches and prospects of the worm do not allow the worm gear to generate the worm. This is valuable when the software demands to lock the output if the application is working in the opposite direction. When the helix angle is much less than 5°, the worm is self-locking. When the helix angle is better than 10°, the worm can be pushed again. Worm and worm gear assemblies have to be mounted on vertical, non-intersecting shafts.
china near me Worm Shaft Reducer Wp Series Gearbox Speed Reducer 30: 1 manufacturers
Solution Description
Wpa Wps Lower CZPT Worm Gear CZPT Reducer
Framework Attribute
one. Widely employed in light-weight market, good resistance to putting on, with large precision in proportions, decrease noise, CZPT d centric managing castings
2. The housing is of strong hardness, compact construction
three. Stable transmission, reduced vibration, massive ratio, canbe matched with CZPT devices
Product Structural Drawing
Model Description
Total sixty households and much more than 20,000types with distinct models, ratios, connections and installations can be picked to meet requirements of CZPT ers.
See Of Item
WPA CZPT box
WPS worm gearbox
Recognize of installation
one. The base-plate need to be plane and stoutness, and the base-plate need to be screwed down and shockproof
2. The connecting shaft of key mover, gearbox and procedure device have to be coaxial installatios
three. The diameter tolerance zone of input and output shaft is H6, the holes of fittings(such as couplings, belt-pulley, sprocket wheel and so on) should correctly mate the shaft, which prevents bearing from breakage simply because of above-loose mate
four. Drivers such as sprocket wheel and gear need to be fitted close to bearings in get to lessen bending anxiety of hanging shaft
five. White assembling motor of WPD reducer, it is required that appropriate volume of butter applies to the worm shaft input hole and keyway, steering clear of assembling as well tightly and rusting right after using for a CZPT time
six. When buying or employing all sorts of WPD variety, if the motor excess weight is larger than the frequent, supporting established is required
Recognize of usage
1. Before employing, please verify cautiously no matter whether the gearbox model, distance, ratio, enter connecting strategy, output shaft composition, enter and output shaft route and revolving path accord with need
two. According to the necessity of picking lubricant oil in the item manual, make sure you fill proper group and model lubricant. And then screw on the vent-plug Unlock the tiny cone-plug of vent-plug. Only right after carrying out these, reducer is presently for starting up up operating. The suitable brand and sufficient lubricant oil is essential, replacing oil in time conforming to the request of item guide is also necessary, especially after using 1st 100 hrs, it is needed refilling new oil
3. When abnormal circumstances arise, make sure you quit and check reducer for every answers and motives for faults of reducer (allowable highest oil temperature is 95, underneath this temperature restrict, if oil temperature no far more goes up, remember to permit reducer proceed working)
Company OVERVIEW
About CZPT sky CZPT
- Heritage: Greensky CZPT Co.,ltd was started in Los CZPT eles in 2008 and has concentrated on producing and giving motor and gearbox for 8 a long time given that 2008.
- Market: Greensky CZPT has CZPT ers in thirty different countries. Germany, Austria, Japan, United states of america and Middle-East are CZPT major market place.
- Honors:Greensky CZPT is member of a council in ZHangZhoug Solar Affiliation which is the biggest renewable vitality affiliation in CZPT of CZPT .
Greensky’s Advantage
|
Cost |
Competitive & Realistic. Our mission is to “Greening the Entire world”. Distributing massively in a low cost value is CZPT technique. We want a lot more and more folks are utilizing large effeciency motor and gearbox. |
|
High quality |
High quality manage is done by 4 procedures: CZPT r Control + Substance Management + Creation Control + Completed CZPT s Handle. |
|
Shipping and delivery |
one hundred% on-time supply Assured |
|
Evaluation |
one hundred% CZPT er Pleasure Guaranteed |
|
Companies |
English, German, Japanese and Chinese income associates are CZPT for One particular-cease full providers. |
|
Enterprise variety |
Manufacture & CZPT & EPC. CZPT sky CZPT has subsidiary organization making solar panels which helps make CZPT value very aggressive. At exact same time, CZPT sky CZPT has a subsidiary EPC firm which can give skilled specialized support for complex complex inquiries. |
|
Expertise |
Our goods have been marketed to stringent clients in Germany and Japan. They are all satisfied with CZPT merchandise. Delivering high quality products and convenient interaction provider are CZPT goal. |
On the website you can find a selection of items including CZPT box, DC gear motor,AC equipment motor, and their relevant components.
FAQ
one Q:What infomation ought to I inform you to affirm the CZPT box?
A: Design/Dimensions B:Ratio and output torque C:Energy and flange type D:Get amount.
two Q: What if I do not know which CZPT box need to have?
A:Will not fret, Send as much info as you can, CZPT group will support you uncover the right a single you are searching for.
three Q:How CZPT need to I hold out for the comments after I deliver the enquiry?
A: In twelve several hours.
four Q:What is your warrenty interval for CZPT box?
A:We provide 1 yr warrenty since the vessel departure day remaining CZPT .
5 Q:What industries are your CZPT box currently being used?
A:Our CZPT box are widely employed in the regions of house appliances and mild industry,etc.
6. Q:How to delivery:
A: By sea – Purchaser appoint forwarder, or CZPT sales staff uncover suitable forwarder for buyers.
By air – Buyer offer you collect convey account, or CZPT product sales crew locate suitable express for buyers. (Mostly for sample)
Others – We prepare to supply products to some area in CZPT appointed by consumers.
7. When you place an order, CZPT team will verify with you about color, package,technique of payment and delivery, then a income agreement will be despatched to you to validate.
If you have any other queries, remember to come to feel free to make contact with us.
Ep Gear’s worm gears use appropriate-angle (90°) non-intersecting shafts to provide an productive solution for electricity transmission programs necessitating substantial reduction ratios in confined spaces. When properly used, worm gears provide the smoothest and quietest kind of transmission. Since the efficiency of a worm drive is dependent on the guide angle and the number of stars on the worm – because efficiency is always the purpose, this ratio must be held as minimal as feasible. To operate properly, the worm and worm gear utilised jointly need to have the very same diameter, pitch and thread.
china Custom Custom Made Steel Worm Gear Shaft for Door Lock Smart manufacturers
Solution Description
Personalized created metal CZPT shaft for doorway lock intelligent
Area: As your requirement
Content: Steel / aluminum / brass / iron / zinc / alloy
Any other material and dimension depends on CZPT ers’ demand.
Use: CZPT ry / household furniture / toy / woodboard / wall
Euipment: CNC Machining device
Screening gear: Projector
Sector CZPT Equipment/ CZPT motive/ Agricultural CZPT ctronics/ CZPT / CZPT CZPT / CZPT ulics/ Valves Oil and Fuel/ CZPT ctrical/ CZPT
Market CZPT ISO 9001: 2008 PPAP RoHS Compliant
Additional Capabilities CAD Layout Companies CAM Programming Providers Coordinate Measuring CZPT s (CMM) Reverse CZPT
| Specification | custom made |
| Our features | 1. 14 years history 2. Short lead time 3.Good after-sale service four. Free samples provided |
| Materials | Stainless steel, copper, brass, carbon steel, aluminum (according to customer’s requirement. |
| Surface Treatment | Zn-plating, Ni-plating, Cr-plating, Tin-plating, copper-plating, the wreath oxygen resin spraying, the heat disposing, hot-dip galvanizing, black oxide coating, painting, powdering, color zinc-plated, blue black zinc-plated, rust preventive oil, titanium alloy galvanized, silver plating, plastic, electroplating, anodizing etc. |
| Main Products | Precision screw,bolt, nuts,fastener,knob,pins, bushing, sleeve,gear, stamping parts,washer,gasket, plastic molding injection parts, standoff,CNC machining service,accessories etc. |
| Producing Equipment | CNC machine , automatic lathe machine,stamping machine,CNC milling machine,rolling machine,lasering,tag grinding machine etc. |
| Management System | ISO9001 – 2008 |
| Available Certificate | RoHS, SGS, Material Certification |
| Testing Equipment | Projecting apparatus, Salt Spray Test, Durometer, and Coating thickness tester , 2D projector |
| Lead time | 10-15 working days as usual,It will based on the detailed order quantity. |
| Managing Returned Goods | With quality problem or deviation from drawings |
| Delivery of Samples | By DHL,Fedex,UPS, TNT,EMS^^ |
| Guarantee | Replacement at all our cost for rejected products |
| Main Markets | North America, South America, Eastern Europe , West Europe , North Europe, South Europe, Asia |
| How to order | * You send us drawing or sample |
| * We carry through project assessment | |
| * We give you our design for your confirmation | |
| * We make the sample and send it to you after you confirmed our design | |
| * You confirm the sample then place an order and pay us 30% deposit | |
| * We start producing | |
| * When the goods is done, you pay us the balance after you confirmed pictures or tracking numbers. | |
| * Trade is done, thank you!! | |
| Applications | Toy,Automotive, instrument, electrical equipment, household appliances, furniture, mechanical equipment, daily living equipment, electronic sports equipment, light industry products, sanitation machinery, market place/ hotel equipment supplies, artware etc. |
Worm gears are appropriate angle drives that provide massive equipment ratios with reasonably short heart-to-middle distances from 1/4″ to eleven”. When properly put in and lubricated, they serve as the quietest, smoothest-managing equipment kind. Simply because worm equipment drives can accomplish high gear ratios, maximum reduction can be reached in a smaller room than several other varieties of gear drives. The worm and worm equipment run at a 90° angle on non-intersecting axes.
china shop Axle Steel Flexible Drive Shaft Vertical Hollow Shaft Electric Motors Worm Gear Shaft manufacturers
Product Description
Axle Steel Versatile CZPT Shaft Vertical Hollow Shaft CZPT ctric CZPT s Worm Equipment Shaft
Goods Description
| Organization sort | Factory/maker |
|
Services |
CNC machining |
| Turning and milling | |
| CNC turning | |
| OEM components | |
|
Content |
(1) CZPT :AL 6061-T6,6063,7075-T |
| (2)Stainless steel:303,304,316L,seventeen-4(SUS630) | |
| (3)Steel:4140,Q235,Q345B,20#,45# | |
| (4)Titanium:TA1,TA2/GR2,TA4/GR5,TC4,TC18 | |
| (5)Brass:C36000(HPb62),C37700(HPb59),C26800(H68) | |
| (6)Copper, bronze, magnesium alloy, Delan, POM, acrylic, Personal computer, and so on. | |
| Service | OEM/ODM avaliable |
|
End |
Sandblasting, anodizing, Blackenning, zinc/Nickl plating, Poland |
| Powder coating, passivation PVD plating titanium, electrogalvanization | |
| Chrome plating, electrophoresis, QPQ | |
| Electrochemical sprucing, chrome plating, knurling, laser etching Logo | |
| Key products | CNC machining heart (milling equipment), CNC lathe, grinding device |
| Cylindrical grinding equipment, drilling device, laser cutting machine | |
| Graphic format | Stage, STP, GIS, CAD, PDF, DWG, DXF and other samples |
| Tolerance | +/-.003mm |
| Area roughness | Ra0.04-.08 |
| Inspection | Complete testing laboratory with micrometer, optical comparator, caliper vernier, CMM |
| Depth caliper vernier, CZPT protractor, clock gauge, interior Celsius gauge |
Associated Merchandise
Products Description
Business Profile
Glow MOTOR experienced been targeted on the R&D,creation and sales of micro motor shafts.We have total productionequipments, the most correct tests equipments and sewage remedy products,all production procedures are accomplished in CZPT factory.
Our products are utilised in mobile vibration motors,sensible wearable products,unmanned aerial automobiles,precision medical products, robots,household and workplace appliances, automotive motors and other fields.
All of CZPT merchandise are CZPT ized with the drawing or sample .The merchandise have been exported to The U.S.Canada, The E.U.And CZPT Asia and so on much more than twenty countries and areas up to now.
Best Provider:We have skilled staff to run.
We can according to your drawings or your needs CZPT -made manufacturing.Best Top quality:
We have a special top quality inspection products.
Professional processing CNC turning ,CNC milling ,Stamping Injecting and surface remedy concurrently,privide one particular-quit support.
Bundle and CZPT
one.FedEX / DHL / UPS / TNT for samples,Doorway to doorway service
two.By sea for batch products
3.Customs specifying freight forwarders or negotiable shipping and delivery strategies
4.Shipping and delivery Time:twenty-twenty five Times for samples30-35 Times for batch products
five.Payment Terms:T/T,L/C at sight,D/P and so forth.
Q:HOW DO I PALCE AN Get?
A:
one.You should ship us your drawing or sample for quotation.We will estimate you inside 24 hrs.
2.After you confirm the quotation, we are going to make sample and despatched to you together with the QC check report, substance certificate and heat treatment report (if required).
3.Following the sample be verified.We’ll begin to make mass creation soon after get the payment.We are going to send out you the production schedule and update you with the processing development and product picture.
Q:WHAT IS YOUR MOQ?
A:Normally MOQ is 1 Computer
Q:HOU Significantly IS THE Shipping Expense TO MY Country?
A:The fright cost depends on your spot, amount, dimension and the bodyweight of the bundle.
Q:WHAT IS THE Creation CYCLE?
A:It is dependent on creation dimension, technological demands and quantity.ten-twenty days is essential normally.
Q:WHAT Variety OF PAYMENT Conditions DO YOU ACCPET?
A:T/T, L/C
Q:WHAT Shipping Strategies DO YOU USE?
A:
one.For tiny quantity:DHL, EMS or other specific you necessary.
2.For large amount:Shipping and delivery by sea or air.
Q:IF YOU MAKE Inadequate Good quality Products, WILL YOU REFOUND?
A:We make merchandise in rigid accordance with the drawings or samples.Soon after creation CZPT QC staff will check out and inspect the products very carefully to guarantee we are delivering experienced items.We have wealthy expertise in serving abroad CZPT ers.So normally, this scenario does not take place.But, if the case does occur, Of course, we will give you total refund.
The equipment ratio of the worm gear established is established by dividing the quantity of enamel of the gear by the amount of threads. Consequently, solitary thread yields greater ratios than multithreading. All ep worm gear bushings have remaining or proper thread. ep worm gear sets are accessible in one, double, triple and quadruple threads.