Product Description
Customise Now
SWL series worm screw jack
Worm Screw Jack
Screw-Worm Jack or screw lift lifts widely used in machine building, metallurgy, construction, irrigation equipment and other industries, is starting up, and dropped through accessories advance, overturned and position adjustment and other functions at various altitudes. SWL is a worm screw-lift crane components foundation with compact structure, small size and light weight. Sources extensive, no noise, easy installation, the use of flexible, multi-function, supporting forms, high reliability, long life and many other advantages. Can be single or in combination, can be controlled accurately in accordance with certain procedures to enhance or promote the adjustment of height Motor power can be used directly or can also be manually operated. It’s a form of structure and assembly, and the height can be customized user requirements
Product Description
Technical data:
1. Lift speed: 150mm/min~1800mm/min
2. Input power:0.5 -21.8KW
3. Screw rang: 5-16 mm
4. Bearing range: 2T-100T
5. Structure: motor direct connection, single & double shaft
Characteristic:
Standardize & series design
Reverse operation
Product Parameters
|
Type |
Model |
Screw thread size |
Max |
Max |
Weight without stroke |
Screw weight |
|
SWL Screw jack |
SWL2.5 |
Tr30*6 |
25 |
25 |
7.3 |
0.45 |
|
SWL5 |
Tr40*7 |
50 |
50 |
16.2 |
0.82 |
|
|
SWL10/15 |
Tr58*12 |
100/150 |
99 |
25 |
1.67 |
|
|
SWL20 |
Tr65*12 |
200 |
166 |
36 |
2.15 |
|
|
SWL25 |
Tr90*16 |
250 |
250 |
70.5 |
4.15 |
|
|
SWL35 |
Tr100*18 |
350 |
350 |
87 |
5.20 |
|
|
SWL50 |
Tr120*20 |
500 |
500 |
420 |
7.45 |
|
|
SWL100 |
Tr160*23 |
1000 |
1000 |
1571 |
13.6 |
|
|
SWL120 |
Tr180*25 |
1200 |
1200 |
1350 |
17.3 |
|
1.Compact structure,Small size.Easy mounting,varied types. Can be applied in 1 unit or multiple units. |
||||
|
2.High reliability.Long service life; With the function of ascending,descending,thrusting,overturning |
||||
|
3.Wide motivity.It can be drived by electrical motor and manual force. |
||||
|
4.It is usually used in low speed situation,widely used in the fields of |
Detailed Photos
|
1. screw rod |
2. nut bolt |
3. cover |
4.Skeleton oil seal |
5.Bearing |
|
6.Worm gear |
7.Oil filling hole |
8.Case |
9.Skeleton oil seal |
10.Cover |
|
11. nut bolt |
12.Bearing |
13.Skeleton oil seal |
14.Bearing |
15.worm |
|
16.Flat key |
17.Bearing |
18.Skeleton oil seal |
19.Cover |
20.Nut bolt |
Product Description
Packaging & Shipping
Company Profile
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard or Nonstandard: | Nonstandard |
|---|---|
| Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car, Power Transmission |
| Customized Support: | OEM, ODM, Obm |
| Brand Name: | Beiji or Customized |
| Certificate: | ISO9001:2008 |
| Structures: | Worm Gear and Worm |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
|---|
Can you provide insights into the importance of proper installation and alignment of winch drives?
Proper installation and alignment of winch drives are of utmost importance to ensure optimal performance, longevity, and safety of the system. Here’s a detailed explanation of the significance of proper installation and alignment of winch drives:
- Optimal Performance:
Proper installation and alignment are crucial for achieving optimal performance of winch drives. Precise alignment ensures that the winch drive operates within its designed parameters, minimizing power losses and maximizing efficiency. Accurate installation of components, such as motors, gearboxes, and brakes, ensures that they are properly integrated and aligned with each other. This alignment reduces mechanical stress, minimizes friction, and allows for smooth and reliable operation of the winch drive, resulting in improved performance and productivity.
- Extended Lifespan:
The correct installation and alignment of winch drives contribute to their longevity. When components are misaligned or improperly installed, it can lead to excessive wear, vibration, and premature failure of critical parts. Misalignment puts additional stress on bearings, shafts, gears, and other components, causing accelerated wear and reducing their lifespan. By ensuring proper alignment during installation, the load is distributed evenly, reducing mechanical stress and increasing the lifespan of the winch drive system.
- Reduced Maintenance and Downtime:
Proper installation and alignment can significantly reduce the need for maintenance and minimize downtime. Misalignment or improper installation can cause issues such as excessive heat generation, increased friction, and misoperation of safety mechanisms. These issues can lead to frequent breakdowns and unplanned downtime, resulting in productivity losses and increased maintenance costs. By ensuring correct alignment and installation, the risk of such issues is minimized, reducing the frequency of maintenance and improving overall system uptime.
- Enhanced Safety:
The safety of personnel and equipment is a critical consideration when it comes to winch drives. Improper installation and alignment can compromise the safety of the system. Misalignment can result in unexpected movements, excessive vibrations, or loss of control, posing risks to both operators and the surrounding environment. Proper alignment ensures that the winch drive operates within its intended parameters, reducing the likelihood of malfunctions, accidents, or equipment damage. It is essential to follow manufacturer guidelines and industry standards for installation and alignment to maintain a safe working environment.
- Efficient Power Transmission:
Correct alignment of winch drives ensures efficient power transmission from the motor to the drum or load. Misalignment can lead to power losses, increased energy consumption, and reduced overall system efficiency. Proper alignment ensures that the power is transmitted smoothly and efficiently, minimizing energy wastage and optimizing the performance of the winch drive. This not only improves energy efficiency but also reduces operating costs over the lifespan of the system.
In summary, the proper installation and alignment of winch drives are essential for achieving optimal performance, extending the lifespan of the system, reducing maintenance and downtime, enhancing safety, and ensuring efficient power transmission. Following manufacturer guidelines, industry standards, and engaging experienced professionals during installation and alignment processes is crucial to maximize the benefits and longevity of winch drive systems.
How does the design of winch drives impact their performance in different environments?
The design of winch drives plays a critical role in determining their performance in different environments. Various design factors influence the reliability, efficiency, and adaptability of winch drives to specific operating conditions. Here’s a detailed explanation of how the design of winch drives impacts their performance:
- Load Capacity and Power:
The design of winch drives directly affects their load capacity and power capabilities. Factors such as motor size, gear ratio, and drum diameter determine the maximum load capacity a winch drive can handle. The power output of the motor and the mechanical advantage provided by the gear system impact the winch drive’s ability to lift or pull heavy loads effectively. A well-designed winch drive with appropriate load capacity and power ensures optimal performance in different environments.
- Speed and Control:
The design of winch drives influences their speed and control characteristics. The gear ratio and motor specifications determine the speed at which the winch drive can operate. Additionally, the presence of a variable speed control mechanism allows for precise and controlled movement of loads. The design should strike a balance between speed and control, depending on the specific application and operational requirements in different environments.
- Drive System:
Winch drives can utilize different drive systems, such as electric, hydraulic, or pneumatic. The design of the drive system impacts the performance of the winch drive in different environments. Electric winch drives are commonly used due to their ease of use, precise control, and suitability for various applications. Hydraulic winch drives offer high power output and are often preferred in heavy-duty applications. Pneumatic winch drives are suitable for environments where electricity or hydraulics are not readily available. The design should align with the specific requirements and constraints of the environment in which the winch drive will be used.
- Enclosure and Protection:
The design of the winch drive enclosure and protection features significantly impacts its performance in different environments. Winch drives used in outdoor or harsh environments should have robust enclosures that provide protection against dust, moisture, and other contaminants. Sealed or weatherproof enclosures prevent damage to internal components and ensure reliable operation. Additionally, features such as thermal protection and overload protection are designed to safeguard the winch drive from overheating or excessive strain, enhancing its performance and longevity.
- Mounting and Installation:
The design of winch drives should consider the ease of mounting and installation. Mounting options such as bolt-on, weld-on, or integrated mounting plates offer flexibility for different installation scenarios. The design should also take into account the space constraints and mounting requirements of the specific environment. Easy and secure installation ensures proper alignment, stability, and efficient operation of the winch drive.
- Control and Safety Features:
The design of winch drives includes control and safety features that impact their performance in different environments. Control systems can range from simple push-button controls to advanced remote controls or integrated control panels. The design should provide intuitive and user-friendly control interfaces for efficient operation. Safety features such as emergency stop mechanisms, load limiters, and overload protection are crucial to prevent accidents and ensure safe operation in various environments. The design should prioritize the incorporation of appropriate safety features based on the specific application and environmental conditions.
By considering these design factors, winch drives can be optimized for performance, reliability, and safety in different environments. A well-designed winch drive that aligns with the specific requirements of the environment will deliver efficient and effective lifting or pulling capabilities while ensuring long-term durability and functionality.
Can you explain the key components and functions of a winch drive mechanism?
A winch drive mechanism consists of several key components that work together to provide controlled pulling or lifting capabilities. Each component has a specific function that contributes to the overall operation of the winch drive. Here’s a detailed explanation of the key components and their functions:
- Power Source:
The power source is the component that provides the energy to drive the winch mechanism. It can be an electric motor, hydraulic system, or even a manual crank. Electric motors are commonly used in modern winches due to their efficiency, controllability, and ease of operation. Hydraulic systems are often employed in heavy-duty winches that require high pulling capacities. Manual winches, operated by hand-cranking, are typically used in lighter applications or as backup systems. The power source converts the input energy into rotational motion, which drives the other components of the winch mechanism.
- Gearbox or Transmission:
The gearbox or transmission is responsible for controlling the speed and torque output of the winch drive. It consists of a series of gears arranged in specific ratios. The gears are engaged or disengaged to achieve the desired speed and torque requirements for the application. The gearbox allows the winch drive to provide both high pulling power or low-speed precision, depending on the needs of the task. It also helps distribute the load evenly across the gear teeth, ensuring smooth and reliable operation.
- Drum or Spool:
The drum or spool is a cylindrical component around which the cable or rope is wound. It is typically made of steel or other durable materials capable of withstanding high tension forces. The drum is connected to the rotational output of the gearbox or transmission. As the gearbox rotates, the drum winds or unwinds the cable, depending on the direction of rotation. The diameter of the drum determines the pulling or lifting capacity of the winch drive. A larger drum diameter allows for a greater length of cable to be wound, resulting in increased pulling power.
- Cable or Rope:
The cable or rope is the element that connects the winch drive to the load being pulled or lifted. It is typically made of steel wire or synthetic materials with high tensile strength. The cable is wound around the drum and extends out to the anchor point or attachment point of the load. It acts as the link between the winch drive and the object being moved. The choice of cable or rope depends on the specific application requirements, such as the weight of the load, environmental conditions, and desired flexibility.
- Braking System:
A braking system is an essential component of a winch drive mechanism to ensure safe and controlled operation. It prevents the cable or rope from unwinding uncontrollably when the winch is not actively pulling or lifting a load. The braking system can be mechanical or hydraulic, and it engages automatically when the winch motor is not applying power. It provides a secure hold and prevents the load from slipping or releasing unintentionally. The braking system also helps control the descent of the load during lowering operations, preventing sudden drops or free-falls.
- Control System:
The control system allows the operator to manage the operation of the winch drive. It typically includes controls such as switches, buttons, or levers that enable the activation, direction, and speed control of the winch. The control system can be integrated into the winch housing or provided as a separate control unit. In modern winches, electronic control systems may offer additional features such as remote operation, load monitoring, and safety interlocks. The control system ensures precise and safe operation, allowing the operator to adjust the winch drive according to the specific requirements of the task.
In summary, a winch drive mechanism consists of key components such as the power source, gearbox or transmission, drum or spool, cable or rope, braking system, and control system. The power source provides the energy to drive the winch, while the gearbox controls the speed and torque output. The drum or spool winds or unwinds the cable, which connects the winch drive to the load. The braking system ensures safe and controlled operation, and the control system allows the operator to manage the winch’s performance. Together, these components enable winch drives to provide controlled pulling or lifting capabilities in a wide range of applications.
editor by Dream 2024-05-07
China manufacturer Worm Gear Screw Jack Speed Reducer Swl Series Translating Screw Jack with Extensive Applicability
Product Description
Top Quality Worm Gear Screw Jacks Load Up to 200 Ton
Machine& Ball Screw Jack Actuators
Features:
1. Suitable for heavy load, low speed and low frequency; 2. Main components: precision trapezoid screw pair and high precision worm gear pair; 3. Compact design, small volume, light weight, wide drive sources, low noise, easy operation, convenient maintenance. 4. The trapezoid screw has self-locking function, it can hold up load without braking device when screw stops traveling. 5. The lifting height can be adjusted according to customer requirements. 6. Widely applied in industries such as machinery, metellurgy, construction and hydraulic equipment. 7. Top End: top plate, clevis end, threaded end, plain end
How to choose a suitable model?
Some questions can help you to choose.
Q1:Do you need screw jack of ball screw or trapezoidal screw?
Q2: How many Kg or Tons the screw jack need to lift or drop? The screw shaft length? How fast the lifting speed is ? Q3:Which the screw top?you need,as picture above?
Q4:Manual type (Hand wheel?driven) or electric motor driven type or both driven type?
Q5:Traveling screw (screw travelling up and down when working) or traveling nut ? (the nut travelling up and down when working),Upright or?Inverted?
Product Parameters
|
Type |
Model |
Screw thread size |
Max |
Max |
Weight without stroke |
Screw weight |
|
SWL Screw jack |
SWL2.5 |
Tr30*6 |
25 |
25 |
7.3 |
0.45 |
|
SWL5 |
Tr40*7 |
50 |
50 |
16.2 |
0.82 |
|
|
SWL10/15 |
Tr58*12 |
100/150 |
99 |
25 |
1.67 |
|
|
SWL20 |
Tr65*12 |
200 |
166 |
36 |
2.15 |
|
|
SWL25 |
Tr90*16 |
250 |
250 |
70.5 |
4.15 |
|
|
SWL35 |
Tr100*18 |
350 |
350 |
87 |
5.20 |
|
|
SWL50 |
Tr120*20 |
500 |
500 |
420 |
7.45 |
|
|
SWL100 |
Tr160*23 |
1000 |
1000 |
1571 |
13.6 |
|
|
SWL120 |
Tr180*25 |
1200 |
1200 |
1350 |
17.3 |
|
1.Compact structure,Small size.Easy mounting,varied types. Can be applied in 1 unit or multiple units. |
||||
|
2.High reliability.Long service life; With the function of ascending,descending,thrusting,overturning |
||||
|
3.Wide motivity.It can be drived by electrical motor and manual force. |
||||
|
4.It is usually used in low speed situation,widely used in the fields of |
Detailed Photos
|
1. screw rod |
2. nut bolt |
3. cover |
4.Skeleton oil seal |
5.Bearing |
|
6.Worm gear |
7.Oil filling hole |
8.Case |
9.Skeleton oil seal |
10.Cover |
|
11. nut bolt |
12.Bearing |
13.Skeleton oil seal |
14.Bearing |
15.worm |
|
16.Flat key |
17.Bearing |
18.Skeleton oil seal |
19.Cover |
20.Nut bolt |
Product Description
Company Profile
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard or Nonstandard: | Nonstandard |
|---|---|
| Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car, Power Transmission |
| Customized Support: | OEM, ODM, Obm |
| Brand Name: | Beiji or Customized |
| Certificate: | ISO9001:2008 |
| Structures: | Worm Gear and Worm |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
|---|
How does the choice of winch drives affect the overall performance and reliability of lifting operations?
The choice of winch drives has a significant impact on the overall performance and reliability of lifting operations. Here’s a detailed explanation of how the choice of winch drives affects performance and reliability:
- Lifting Capacity:
The choice of winch drives directly affects the lifting capacity of the system. Different winch drives have varying load capacities, and selecting an appropriate winch drive that matches the intended lifting requirements is crucial. Choosing a winch drive with insufficient lifting capacity can result in overloading, which can lead to equipment failure, safety hazards, and potential damage to the load or surrounding structures. On the other hand, selecting a winch drive with a higher lifting capacity than necessary can lead to unnecessary costs and inefficient operation. Therefore, selecting the right winch drive with the appropriate lifting capacity is essential for optimal performance and reliability.
- Speed and Control:
The choice of winch drives also affects the speed and control of lifting operations. Different winch drives offer varying speed ranges and control options. High-quality winch drives provide smooth and precise speed control, allowing for accurate positioning and delicate handling of loads. The choice of winch drives with suitable speed and control capabilities ensures efficient and controlled lifting operations, reducing the risk of accidents, damage to the load, or strain on the lifting equipment. Additionally, winch drives with advanced control features, such as programmable logic controllers (PLCs) or electronic control systems, enhance operational reliability and performance by enabling synchronized movements and automation.
- Durability and Reliability:
The choice of winch drives significantly impacts the durability and reliability of lifting operations. High-quality winch drives constructed with robust materials and designed for heavy-duty applications offer enhanced durability and reliability. They can withstand the demanding conditions and stress associated with lifting operations, minimizing the risk of breakdowns, malfunctions, or premature wear. Choosing winch drives from reputable manufacturers known for their quality and reliability ensures long-term performance and reduces the need for frequent maintenance or replacement, enhancing the overall reliability of the lifting operations.
- Safety Features:
Winch drives come with various safety features that contribute to the overall performance and reliability of lifting operations. These safety features include overload protection systems, emergency stop controls, limit switches, and fail-safe mechanisms. The choice of winch drives with comprehensive safety features enhances the safety of lifting operations by preventing overloading, safeguarding against equipment failures, and providing emergency shutdown options in critical situations. Properly selecting winch drives with appropriate safety features ensures compliance with safety regulations, reduces the risk of accidents, and enhances the reliability of lifting operations.
- Compatibility and Integration:
Choosing winch drives that are compatible with the overall lifting system and easily integrable with other components is crucial for optimal performance and reliability. Compatibility issues can arise if the selected winch drive does not match the mechanical requirements, power supply, or control interfaces of the lifting system. Incompatibility can lead to operational inefficiencies, increased maintenance needs, or even system failures. Therefore, careful consideration of the compatibility and integration aspects when choosing winch drives ensures seamless integration, smooth operation, and enhanced reliability of lifting operations.
In summary, the choice of winch drives significantly impacts the overall performance and reliability of lifting operations. Factors such as lifting capacity, speed and control capabilities, durability and reliability, safety features, and compatibility with the overall system should be carefully considered when selecting winch drives. By choosing the right winch drives that meet the specific requirements of the lifting operations, operators can achieve optimal performance, ensure safe and efficient lifting, and enhance the overall reliability of the operations.
Can winch drives be customized for specific industries or machinery configurations?
Yes, winch drives can be customized to meet the specific requirements of different industries or machinery configurations. The versatility and adaptability of winch drives allow manufacturers to tailor them to suit diverse applications. Here’s a detailed explanation of how winch drives can be customized:
- Load Capacity:
Winch drives can be customized to accommodate various load capacities. Manufacturers can design and build winch drives with different load ratings to match the specific lifting or pulling requirements of different industries or machinery configurations. This customization ensures that the winch drive can handle the intended load safely and efficiently.
- Power Source:
Winch drives can be customized to utilize different power sources, such as electric, hydraulic, or pneumatic. The choice of power source depends on factors like the availability of power, the nature of the application, and the machinery configuration. Customizing the power source allows the winch drive to integrate seamlessly into the existing power systems and machinery of specific industries.
- Mounting Options:
Winch drives can be customized to offer various mounting options to suit specific machinery configurations. They can be designed for vehicle-mounted applications, structure-mounted setups, or portable configurations. Customizing the mounting options ensures that the winch drive can be easily and securely installed according to the specific requirements of the industry or machinery.
- Control Mechanisms:
The control mechanisms of winch drives can be customized to align with the preferred control methods of different industries or machinery configurations. Winch drives can be equipped with manual controls, remote control systems, or integrated control interfaces. Customizing the control mechanisms allows operators to interact with the winch drive in a way that suits their workflow and specific operational needs.
- Environmental Considerations:
Winch drives can be customized to meet specific environmental requirements. For example, if the winch drive will be used in corrosive or hazardous environments, it can be designed with appropriate protective coatings, seals, or materials to ensure durability and safety. Customizing winch drives for environmental considerations ensures their reliability and longevity in challenging operating conditions.
- Safety Features:
Winch drives can be customized to incorporate specific safety features based on industry regulations and machinery configurations. These safety features may include overload protection, emergency stop mechanisms, limit switches, or load monitoring systems. Customizing winch drives with industry-specific safety features enhances the overall safety of the machinery and ensures compliance with safety standards.
- Size and Dimensions:
Winch drives can be customized in terms of size and dimensions to accommodate space limitations or specific machinery configurations. Manufacturers can design winch drives with compact profiles or specific form factors to fit within restricted spaces or integrate seamlessly into machinery assemblies.
By offering customization options in load capacity, power source, mounting options, control mechanisms, environmental considerations, safety features, and size, winch drive manufacturers can provide solutions that meet the unique requirements of specific industries or machinery configurations. Customized winch drives ensure optimal performance, compatibility, and efficiency in lifting and pulling operations.
What is a winch drive, and how is it utilized in various applications?
A winch drive is a mechanical system designed to provide controlled pulling or lifting capabilities using a spool or drum around which a cable or rope is wound. It consists of a power source, such as an electric motor or hydraulic system, coupled with a gearbox or transmission mechanism to control the speed and torque output. Winch drives are widely utilized in various applications that require the controlled movement of heavy loads. Here’s a detailed explanation of winch drives and their utilization in different applications:
- Off-Road Vehicles and Recovery:
Winch drives are commonly used in off-road vehicles, such as trucks, SUVs, and ATVs, for recovery purposes. In situations where a vehicle gets stuck or needs to be pulled out of challenging terrain, a winch drive mounted on the vehicle’s front or rear bumper can be employed. The winch drive’s cable is connected to a secure anchor point, and as the winch motor rotates, it winds the cable onto the drum, exerting a pulling force that helps extract the vehicle from the obstacle. Winch drives provide reliable pulling power and are essential for off-road enthusiasts, emergency services, and military applications.
- Marine and Boating:
In marine and boating applications, winch drives are utilized for various tasks, including anchoring, mooring, and lifting heavy loads. Winches are commonly found on sailboats and powerboats to control the sails, raise and lower the anchor, or assist in docking. They are also used in larger vessels and ships for cargo handling, launching and recovering small boats or life rafts, and handling equipment on deck. The versatility and strength of winch drives make them indispensable in the maritime industry, providing precise and controlled pulling or lifting capabilities in demanding marine environments.
- Construction and Industrial:
Winch drives play a vital role in construction and industrial settings, where the controlled movement of heavy materials and equipment is required. They are utilized in cranes, hoists, and lifting systems to perform tasks such as raising and lowering loads, positioning materials, and erecting structures. Winches can also be found in material handling equipment, such as forklifts and telehandlers, to assist in loading and unloading operations. In construction sites, winch drives are valuable for activities like tensioning cables, pulling machinery, and operating temporary lifts. The robustness and reliability of winch drives make them essential tools in the construction and industrial sectors.
- Recreational and Entertainment:
Winch drives are utilized in various recreational and entertainment applications. In amusement parks and adventure facilities, winches are often used in zip line systems, allowing participants to traverse from one point to another safely. They are also employed in aerial lifts and chairlifts for ski resorts and mountainous areas. Winches provide controlled and reliable movement, ensuring the safety and enjoyment of individuals engaging in recreational activities. Additionally, winches are utilized in stage productions and theatrical settings to create dynamic effects, such as flying performers or moving set pieces.
- Automotive and Garage:
In automotive and garage settings, winch drives find utility in a variety of applications. They are commonly used in car haulers and trailers to load and unload vehicles onto the platform. Winches are also employed in automotive repair and maintenance, assisting in tasks such as engine removal, vehicle recovery, and frame straightening. In home garages, winch drives can be utilized for lifting heavy objects, such as engines or equipment. The versatility and compactness of winch drives make them valuable tools for automotive enthusiasts, professional mechanics, and DIY enthusiasts.
In summary, a winch drive is a mechanical system that provides controlled pulling or lifting capabilities using a spool or drum and a power source. They are employed in various applications, including off-road vehicle recovery, marine and boating operations, construction and industrial tasks, recreational and entertainment activities, automotive and garage settings. Winch drives offer reliable and controlled movement, allowing for the handling of heavy loads in a wide range of settings and industries.
editor by Dream 2024-05-06
China Standard Aluminum Housing Screw Conveyor RV Series Gear Box Nmrv Worm Orthogonal Gear Reducer
Product Description
Aluminum Housing Screw Conveyor RV Series Gear Box Nmrv Worm Orthogonal Gear Reducer
|
Input Configurations |
Double or single input shaft (NRV) |
|
PAM / IEC motor input shaft with circle or square flange (NMRV) |
|
|
Output Configurations
|
Double or single output shaft |
|
Output flange |
Main Feature
The gearbox can rotate in both directions operate and contains 1 oil filling at delivery. you will benefit from its high quality and a short delivery time.
Specification
|
Model |
Motor Input Flange (circle) |
Transmission Ratio |
Power (kw) |
Ratio (i) |
Nominal Torque (Nm) |
|||||||||||||||
|
PAM / IEC |
Internal Dia. |
Dis. Between Diagonal Screw Holes |
External Dia. |
Width of Key Slot |
5 |
7.5 |
10 |
15 |
20 |
25 |
30 |
40 |
50 |
60 |
80 |
100 |
||||
|
N |
M |
P |
E |
Diamter of Input Shaft |
||||||||||||||||
|
NMRV25 |
56B14 |
50 |
65 |
80 |
3 |
9 |
– |
9 |
– |
0.06 |
7.5-60 |
2.6-14 |
||||||||
|
NMRV30 |
63B5 |
95 |
115 |
140 |
4 |
11 |
– |
0.06-0.18 |
7.5-80 |
2.6-14 |
||||||||||
|
63B14 |
60 |
75 |
90 |
|||||||||||||||||
|
56B5 |
80 |
100 |
120 |
3 |
9 |
– |
||||||||||||||
|
56B14 |
50 |
65 |
80 |
|||||||||||||||||
|
NMRV40 |
71B5 |
110 |
130 |
160 |
5 |
14 |
– |
0.09-0.37 |
7.5-100 |
11-53 |
||||||||||
|
71B14 |
70 |
85 |
105 |
|||||||||||||||||
|
63B5 |
95 |
115 |
140 |
4 |
11 |
|||||||||||||||
|
63B14 |
60 |
75 |
90 |
|||||||||||||||||
|
56B5 |
80 |
100 |
120 |
3 |
– |
9 |
||||||||||||||
|
NMRV50 |
80B5 |
130 |
165 |
200 |
6 |
19 |
– |
0.12-0.75 |
7.5-100 |
21-89 |
||||||||||
|
80B14 |
80 |
100 |
120 |
|||||||||||||||||
|
71B5 |
110 |
130 |
160 |
5 |
14 |
– |
||||||||||||||
|
71B14 |
70 |
85 |
105 |
|||||||||||||||||
|
63B5 |
95 |
115 |
140 |
4 |
– |
11 |
||||||||||||||
|
NMRV63 |
90B5 |
130 |
165 |
200 |
8 |
24 |
– |
0.25-1.5 |
7.5-100 |
56-166 |
||||||||||
|
90B14 |
95 |
115 |
140 |
|||||||||||||||||
|
80B5 |
130 |
165 |
200 |
6 |
19 |
– |
||||||||||||||
|
80B14 |
80 |
100 |
120 |
|||||||||||||||||
|
71B5 |
110 |
130 |
160 |
5 |
– |
14 |
||||||||||||||
|
71B14 |
70 |
85 |
105 |
|||||||||||||||||
|
NMRV75 |
100/112B5 |
180 |
215 |
250 |
8 |
– |
28 |
– |
0.55-4 |
7.5-100 |
90-269 |
|||||||||
|
100/112B14 |
110 |
130 |
160 |
|||||||||||||||||
|
90B5 |
130 |
165 |
200 |
8 |
24 |
– |
||||||||||||||
|
90B14 |
95 |
115 |
140 |
|||||||||||||||||
|
80B5 |
130 |
165 |
200 |
6 |
– |
19 |
||||||||||||||
|
80B14 |
80 |
100 |
120 |
|||||||||||||||||
|
71B5 |
110 |
130 |
160 |
– |
– |
14 |
||||||||||||||
|
NMRV90 |
100/112B5 |
180 |
215 |
250 |
8 |
– |
28 |
– |
0.55-4 |
7.5-100 |
101-458 |
|||||||||
|
100/112B14 |
110 |
130 |
160 |
|||||||||||||||||
|
90B5 |
130 |
165 |
200 |
8 |
24 |
– |
||||||||||||||
|
90B14 |
95 |
115 |
140 |
|||||||||||||||||
|
80B5 |
130 |
165 |
200 |
6 |
– |
19 |
||||||||||||||
|
80B14 |
80 |
100 |
120 |
|||||||||||||||||
|
NMRV110 |
132B5 |
230 |
265 |
300 |
10 |
– |
38 |
– |
1.1-7.5 |
7.5-100 |
242-660 |
|||||||||
|
132B14 |
130 |
165 |
200 |
– |
||||||||||||||||
|
100/112B5 |
180 |
215 |
250 |
8 |
28 |
– |
||||||||||||||
|
90B5 |
130 |
165 |
200 |
– |
24 |
|||||||||||||||
|
90B14 |
95 |
115 |
140 |
– |
||||||||||||||||
|
80B5 |
130 |
165 |
200 |
– |
19 |
|||||||||||||||
|
NMRV130 |
132B5 |
230 |
265 |
300 |
10 |
– |
38 |
– |
2.2-7.5 |
7.5-100 |
333-1596 |
|||||||||
|
132B14 |
130 |
165 |
200 |
– |
||||||||||||||||
|
100/112B5 |
180 |
215 |
250 |
8 |
– |
28 |
||||||||||||||
|
90B5 |
130 |
165 |
200 |
– |
– |
24 |
||||||||||||||
|
90B14 |
95 |
115 |
140 |
|||||||||||||||||
|
NMRV150 |
160B5 |
250 |
300 |
350 |
12 |
– |
42 |
– |
2.2-15 |
7.5-100 |
570-1760 |
|||||||||
|
132B5 |
230 |
265 |
300 |
10 |
– |
38 |
– |
|||||||||||||
|
132B14 |
130 |
165 |
200 |
– |
||||||||||||||||
|
100/112B5 |
180 |
215 |
250 |
8 |
– |
28 |
||||||||||||||
Company profile
Scenario
Packing
FAQ
Q1: I want to buy your products, how can I pay?
A: You can pay via T/T(30%+70%), L/C ,D/P etc.
Q2: How can you guarantee the quality?
A: One year’s warranty against B/L date. If you meet with quality problem, please send us pictures or video to check, we promise to send spare parts or new products to replace. Our guarantee not include inappropriate operation or wrong specification selection.
Q3: How we select models and specifications?
A: You can email us the series code (for example: RC series helical gearbox) as well as requirement details, such as motor power,output speed or ratio, service factor or your application…as much data as possible. If you can supply some pictures or drawings,it is nice.
Q4: If we don’t find what we want on your website, what should we do?
A: We offer 3 options:
1, You can email us the pictures, drawings or descriptions details. We will try to design your products on the basis of our
standard models.
2, Our R&D department is professional for OEM/ODM products by drawing/samples, you can send us samples, we do customized design for your bulk purchasing.
3, We can develop new products if they have good market. We have already developed many items for special using successful, such as special gearbox for agitator, cement conveyor, shoes machines and so on.
Q5: Can we buy 1 pc of each item for quality testing?
A: Yes, we are glad to accept trial order for quality testing.
Q6: How about your product delivery time?
A: Normally for 20’container, it takes 25-30 workdays for RV series worm gearbox, 35-40 workdays for helical gearmotors. /* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Application: | Motor, Machinery, Agricultural Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | B3,B6,B7,B8,V5,V6 |
| Layout: | Coaxial |
| Gear Shape: | Cylindrical Gear |
| Step: | Single-Step |
| Customization: |
Available
|
|
|---|
How does the choice of winch drives affect the overall performance and reliability of lifting operations?
The choice of winch drives has a significant impact on the overall performance and reliability of lifting operations. Here’s a detailed explanation of how the choice of winch drives affects performance and reliability:
- Lifting Capacity:
The choice of winch drives directly affects the lifting capacity of the system. Different winch drives have varying load capacities, and selecting an appropriate winch drive that matches the intended lifting requirements is crucial. Choosing a winch drive with insufficient lifting capacity can result in overloading, which can lead to equipment failure, safety hazards, and potential damage to the load or surrounding structures. On the other hand, selecting a winch drive with a higher lifting capacity than necessary can lead to unnecessary costs and inefficient operation. Therefore, selecting the right winch drive with the appropriate lifting capacity is essential for optimal performance and reliability.
- Speed and Control:
The choice of winch drives also affects the speed and control of lifting operations. Different winch drives offer varying speed ranges and control options. High-quality winch drives provide smooth and precise speed control, allowing for accurate positioning and delicate handling of loads. The choice of winch drives with suitable speed and control capabilities ensures efficient and controlled lifting operations, reducing the risk of accidents, damage to the load, or strain on the lifting equipment. Additionally, winch drives with advanced control features, such as programmable logic controllers (PLCs) or electronic control systems, enhance operational reliability and performance by enabling synchronized movements and automation.
- Durability and Reliability:
The choice of winch drives significantly impacts the durability and reliability of lifting operations. High-quality winch drives constructed with robust materials and designed for heavy-duty applications offer enhanced durability and reliability. They can withstand the demanding conditions and stress associated with lifting operations, minimizing the risk of breakdowns, malfunctions, or premature wear. Choosing winch drives from reputable manufacturers known for their quality and reliability ensures long-term performance and reduces the need for frequent maintenance or replacement, enhancing the overall reliability of the lifting operations.
- Safety Features:
Winch drives come with various safety features that contribute to the overall performance and reliability of lifting operations. These safety features include overload protection systems, emergency stop controls, limit switches, and fail-safe mechanisms. The choice of winch drives with comprehensive safety features enhances the safety of lifting operations by preventing overloading, safeguarding against equipment failures, and providing emergency shutdown options in critical situations. Properly selecting winch drives with appropriate safety features ensures compliance with safety regulations, reduces the risk of accidents, and enhances the reliability of lifting operations.
- Compatibility and Integration:
Choosing winch drives that are compatible with the overall lifting system and easily integrable with other components is crucial for optimal performance and reliability. Compatibility issues can arise if the selected winch drive does not match the mechanical requirements, power supply, or control interfaces of the lifting system. Incompatibility can lead to operational inefficiencies, increased maintenance needs, or even system failures. Therefore, careful consideration of the compatibility and integration aspects when choosing winch drives ensures seamless integration, smooth operation, and enhanced reliability of lifting operations.
In summary, the choice of winch drives significantly impacts the overall performance and reliability of lifting operations. Factors such as lifting capacity, speed and control capabilities, durability and reliability, safety features, and compatibility with the overall system should be carefully considered when selecting winch drives. By choosing the right winch drives that meet the specific requirements of the lifting operations, operators can achieve optimal performance, ensure safe and efficient lifting, and enhance the overall reliability of the operations.
Can you provide examples of products or machinery that commonly use winch drives?
Winch drives are widely used in various industries and applications where lifting, pulling, or positioning heavy loads is required. They offer a versatile and efficient solution for numerous tasks. Here are some examples of products or machinery that commonly use winch drives:
- Cranes:
Winch drives are an integral part of cranes used in construction, manufacturing, and shipping industries. They enable the lifting and lowering of loads, as well as the movement of crane booms and jibs. Cranes such as mobile cranes, tower cranes, and overhead cranes rely on winch drives for their lifting capabilities.
- Elevators and Lifts:
Winch drives are used in elevators and lifts to vertically transport people or goods between different levels of buildings or structures. They provide the necessary lifting force for the elevator car or lift platform, allowing smooth and controlled vertical movement.
- Marine Equipment:
Winch drives are commonly found in various marine equipment and vessels. They are used in shipboard cranes, davits, anchor handling winches, mooring winches, and fishing equipment. Winch drives play a crucial role in the handling of heavy equipment, cargo, and anchoring operations in marine environments.
- Offshore and Oil Rig Applications:
In offshore and oil rig applications, winch drives are utilized for various tasks. They are used in winches for launching and recovering subsea equipment, handling pipes and cables, and positioning heavy loads on offshore platforms. Winch drives are also employed in drilling equipment for operations such as raising and lowering the drilling string.
- Material Handling Equipment:
A wide range of material handling equipment relies on winch drives for lifting and pulling operations. This includes hoists, winch trucks, forklifts, conveyor systems, and overhead cranes used in warehouses, manufacturing facilities, and construction sites. Winch drives enable efficient and controlled movement of heavy materials and equipment.
- Entertainment Industry:
The entertainment industry extensively uses winch drives for stage rigging, theatrical productions, and concert setups. Winch drives are employed to move and control stage elements, lighting fixtures, sound equipment, and special effects. They allow for dynamic and precise positioning of equipment during performances.
- Automotive Recovery and Towing:
Winch drives are commonly used in recovery and towing equipment for vehicles. They are mounted on trucks or trailers and provide the pulling force necessary to recover stuck or immobilized vehicles. Winch drives are also utilized in off-road vehicles and ATV (All-Terrain Vehicle) winches for self-recovery or assisting others.
- Agricultural Machinery:
In the agricultural sector, winch drives are employed in various machinery such as agricultural sprayers, irrigation systems, and harvesting equipment. They facilitate the movement and positioning of equipment, as well as the lifting and lowering of heavy loads, enhancing efficiency in farming operations.
These examples illustrate the wide-ranging applications of winch drives across different industries. Their versatility and adaptability make them essential components in various products and machinery that involve lifting, pulling, or positioning heavy loads.
In what industries or scenarios are winch drives commonly employed?
Winch drives find extensive utilization in various industries and scenarios that require controlled pulling or lifting capabilities. Their versatility and reliability make them valuable tools in a wide range of applications. Here’s a detailed explanation of the industries and scenarios where winch drives are commonly employed:
- Off-Road and Automotive:
Winch drives are widely utilized in off-road vehicles, such as trucks, SUVs, and ATVs, for recovery purposes. They are essential in scenarios where vehicles get stuck or need to be pulled out of challenging terrain. Winch drives mounted on the front or rear bumpers of off-road vehicles provide the necessary pulling power to extricate vehicles from mud, sand, or other obstacles. In the automotive industry, winch drives are also employed in car haulers and trailers for loading and unloading vehicles, as well as in automotive repair and maintenance for tasks like engine removal and frame straightening.
- Marine and Boating:
Winch drives play a crucial role in the marine and boating industry. They are commonly used for anchoring, mooring, and handling heavy loads. Sailboats and powerboats utilize winches to control the sails, raise and lower the anchor, and assist in docking. Larger vessels and ships employ winch drives for cargo handling, launching and recovering small boats or life rafts, and handling equipment on deck. Winch drives in the marine industry offer precise and controlled pulling or lifting capabilities in demanding maritime environments.
- Construction and Industrial:
The construction and industrial sectors heavily rely on winch drives for various tasks requiring the movement of heavy materials and equipment. Winches are commonly used in cranes, hoists, and lifting systems for raising and lowering loads, positioning materials, and erecting structures. They are also found in material handling equipment, such as forklifts and telehandlers, to assist in loading and unloading operations. Winch drives are invaluable in construction sites for activities like tensioning cables, pulling machinery, and operating temporary lifts. Their robustness and reliability make them indispensable tools in the construction and industrial industries.
- Recreational and Adventure:
Winch drives are utilized in various recreational and adventure scenarios to provide controlled movement and enhance safety. In amusement parks and adventure facilities, winches are often used in zip line systems, enabling participants to traverse from one point to another safely. They are also employed in aerial lifts and chairlifts for ski resorts and mountainous areas. Winch drives provide the necessary pulling power and controlled speed, ensuring the safety and enjoyment of individuals engaging in recreational activities. Additionally, winches are utilized in stage productions and theatrical settings to create dynamic effects, such as flying performers or moving set pieces.
- Oil and Gas:
In the oil and gas industry, winch drives are commonly employed in various operations. They are used for tasks such as wireline operations, well intervention, and the handling of heavy equipment. Winch drives assist in lowering and raising tools and instruments into wellbores, as well as in the deployment and retrieval of subsea equipment and structures. They provide the necessary pulling power and control to perform critical operations in the oil and gas exploration and production processes.
These are just a few examples of the industries and scenarios where winch drives are commonly employed. Their versatility, strength, and controllability make them valuable tools in numerous applications, ranging from off-road and automotive to marine and boating, construction and industrial, recreational and adventure, and oil and gas industries.
editor by Dream 2024-05-03
China Best Sales Screw Jack; Worm Gear Reducer; Agricultural Gearbox; Reducers;
Product Description
1.Convenient to adjust
2.Wide range of ratio
3.Easy to install
4.high torque
Application Industries:
Our SWL series screw jacks are widely used in the industries such as metallurgy,mining,hoisting and transportation, electrical
power,energy source,constrction and building material,light industry and traffice industry
Product Parameters
|
Type |
Model |
Screw thread size |
Max |
Max |
Weight without stroke |
Screw weight |
|
SWL Screw jack |
SWL2.5 |
Tr30*6 |
25 |
25 |
7.3 |
0.45 |
|
SWL5 |
Tr40*7 |
50 |
50 |
16.2 |
0.82 |
|
|
SWL10/15 |
Tr58*12 |
100/150 |
99 |
25 |
1.67 |
|
|
SWL20 |
Tr65*12 |
200 |
166 |
36 |
2.15 |
|
|
SWL25 |
Tr90*16 |
250 |
250 |
70.5 |
4.15 |
|
|
SWL35 |
Tr100*18 |
350 |
350 |
87 |
5.20 |
|
|
SWL50 |
Tr120*20 |
500 |
500 |
420 |
7.45 |
|
|
SWL100 |
Tr160*23 |
1000 |
1000 |
1571 |
13.6 |
|
|
SWL120 |
Tr180*25 |
1200 |
1200 |
1350 |
17.3 |
|
1.Compact structure,Small size.Easy mounting,varied types. Can be applied in 1 unit or multiple units. |
||||
|
2.High reliability.Long service life; With the function of ascending,descending,thrusting,overturning |
||||
|
3.Wide motivity.It can be drived by electrical motor and manual force. |
||||
|
4.It is usually used in low speed situation,widely used in the fields of |
Detailed Photos
|
1. screw rod |
2. nut bolt |
3. cover |
4.Skeleton oil seal |
5.Bearing |
|
6.Worm gear |
7.Oil filling hole |
8.Case |
9.Skeleton oil seal |
10.Cover |
|
11. nut bolt |
12.Bearing |
13.Skeleton oil seal |
14.Bearing |
15.worm |
|
16.Flat key |
17.Bearing |
18.Skeleton oil seal |
19.Cover |
20.Nut bolt |
Product Description
Packaging & Shipping
Company Profile
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| Standard or Nonstandard: | Nonstandard |
|---|---|
| Application: | Textile Machinery, Garment Machinery, Conveyer Equipment, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car, Power Transmission, Automatic Equipment |
| Customized Support: | OEM, ODM, Obm |
| Brand Name: | Beiji or Customized |
| Certificate: | ISO9001:2008 |
| Structures: | Worm Gear and Worm |
| Samples: |
US$ 50/Piece
1 Piece(Min.Order) | |
|---|
Can you explain the impact of winch drives on the overall efficiency of lifting systems?
The efficiency of lifting systems is significantly influenced by the choice and performance of winch drives. Winch drives play a crucial role in converting power into mechanical work to lift or move heavy loads. Here’s a detailed explanation of the impact of winch drives on the overall efficiency of lifting systems:
- Power Transmission:
Winch drives are responsible for transmitting power from the energy source to the lifting mechanism. The efficiency of power transmission directly affects the overall efficiency of the lifting system. Well-designed winch drives minimize power losses due to friction, heat generation, or mechanical inefficiencies. By optimizing the gear system, bearings, and other mechanical components, winch drives can maximize power transmission efficiency and minimize energy waste.
- Mechanical Advantage:
Winch drives provide a mechanical advantage that allows the lifting system to handle heavier loads with less effort. The mechanical advantage is determined by the gear ratio and drum diameter of the winch drive. By selecting an appropriate gear ratio, the winch drive can multiply the input torque, enabling the lifting system to overcome the resistance of the load more efficiently. A higher mechanical advantage reduces the strain on the power source and improves the overall efficiency of the lifting system.
- Speed Control:
Winch drives offer speed control capabilities, allowing operators to adjust the lifting speed according to the specific requirements of the task. The ability to control the lifting speed is essential for efficient and safe operation. By utilizing winch drives with precise speed control mechanisms, the lifting system can optimize the speed to match the load, reducing unnecessary energy consumption and increasing overall efficiency.
- Load Distribution:
Winch drives play a vital role in distributing the load evenly across the lifting system. Uneven load distribution can lead to excessive stress on certain components, reducing the overall efficiency and potentially causing equipment failure. Well-designed winch drives ensure that the load is distributed evenly, minimizing stress concentrations and maximizing the efficiency of the lifting system.
- Control and Safety Features:
Winch drives incorporate control and safety features that contribute to the overall efficiency of the lifting system. Advanced control systems allow for precise positioning and smooth operation, minimizing unnecessary movements and reducing energy consumption. Safety features, such as overload protection or emergency stop mechanisms, help prevent accidents and equipment damage, ensuring uninterrupted and efficient operation of the lifting system.
- Reliability and Maintenance:
The reliability and maintenance requirements of winch drives directly impact the overall efficiency of lifting systems. Well-designed winch drives with robust construction and quality components minimize the risk of breakdowns or unplanned downtime. Additionally, winch drives that are easy to maintain and service reduce the time and resources required for maintenance, maximizing the uptime and efficiency of the lifting system.
In summary, the choice and performance of winch drives have a significant impact on the overall efficiency of lifting systems. By optimizing power transmission, providing a mechanical advantage, offering speed control, ensuring load distribution, incorporating control and safety features, and prioritizing reliability and maintenance, winch drives can enhance the efficiency, productivity, and safety of lifting operations.
What factors should be considered when selecting a winch drive for specific applications?
When selecting a winch drive for specific applications, several factors need to be considered to ensure optimal performance and compatibility. Here’s a detailed explanation of the key factors that should be taken into account:
- Load Capacity:
The load capacity is one of the most critical factors to consider when selecting a winch drive. It refers to the maximum weight or force that the winch can handle safely and efficiently. It’s essential to evaluate the anticipated loads in the specific application and choose a winch drive with a sufficient load capacity to handle those loads. Selecting a winch drive with inadequate load capacity can result in safety hazards, reduced performance, and potential damage to the winch or the load being lifted or pulled.
- Power Source:
The power source of the winch drive is another crucial consideration. Winch drives are available in electric, hydraulic, and pneumatic variants, each with its own advantages and limitations. The choice of power source depends on factors such as the availability of power, the required pulling power, and the specific application’s environmental conditions. Electric winch drives are commonly used due to their ease of use and versatility. Hydraulic winch drives offer high pulling power for heavy-duty applications, while pneumatic winch drives are suitable for hazardous or explosive environments where electrical components are not permitted.
- Control Mechanisms:
The control mechanisms of the winch drive play a significant role in the efficiency and ease of operation. Consider the control options available for the winch drive, such as manual control, remote control, or integrated control systems. Remote control systems, for example, allow operators to control the winch drive from a safe distance, enhancing safety and flexibility. Additionally, some winch drives offer features like variable speed control, which allows for precise positioning and controlled movement of the load.
- Environmental Conditions:
The environmental conditions in which the winch drive will be used should be carefully assessed. Some winch drives are designed to withstand harsh environments, such as extreme temperatures, moisture, dust, or corrosive substances. For example, in marine applications, winch drives need to be corrosion-resistant and capable of operating in wet and salty conditions. Assessing the specific environmental conditions and selecting a winch drive with appropriate protection and durability features ensures its longevity and reliable performance.
- Mounting and Installation:
The mounting and installation requirements of the winch drive should be considered to ensure proper integration into the intended application. Evaluate factors such as space availability, mounting options (e.g., vehicle-mounted, structure-mounted, or portable), and compatibility with existing equipment or systems. Some winch drives may require additional accessories or modifications for installation, so it’s important to factor in these considerations during the selection process.
- Safety Features:
Winch drives should be equipped with appropriate safety features to prevent accidents and ensure secure operation. Common safety features include overload protection, emergency stop mechanisms, limit switches, and braking systems for load holding. These safety features contribute to the safe operation of the winch drive and protect against potential hazards or damage caused by excessive loads or unexpected circumstances.
- Reliability and Maintenance:
Consider the reliability and maintenance requirements of the winch drive. Look for winch drives from reputable manufacturers known for producing high-quality and reliable equipment. Assess factors such as maintenance intervals, ease of maintenance, availability of spare parts, and after-sales support. Choosing a winch drive that is reliable and has accessible maintenance options ensures minimal downtime and long-term cost-effectiveness.
By considering these factors when selecting a winch drive for specific applications, you can make an informed decision that aligns with the load requirements, power source availability, control preferences, environmental conditions, and safety considerations of your intended application.
How does the design of a winch drive contribute to efficient load lifting and pulling?
The design of a winch drive plays a critical role in ensuring efficient load lifting and pulling operations. Various design considerations are implemented to optimize performance, reliability, and safety. Here’s a detailed explanation of how the design of a winch drive contributes to efficient load lifting and pulling:
- Power and Torque:
A well-designed winch drive is equipped with a power source and gearbox that provide sufficient power and torque to handle the intended load. The power source, whether it’s an electric motor or hydraulic system, should have adequate capacity to generate the required energy for the pulling or lifting operation. The gearbox or transmission is designed to provide the appropriate torque output, matching the load requirements. By ensuring the winch drive has the necessary power and torque, it can efficiently handle the load without straining the components or compromising performance.
- Gearing and Speed Control:
The gearing system within the winch drive allows for precise control over the speed of the pulling or lifting operation. The gearbox is designed with different gear ratios, enabling the operator to select the desired speed based on the specific requirements of the task. This capability is crucial for efficient load handling. For instance, a higher gear ratio can be used for lighter loads or faster pulling speeds, while a lower gear ratio provides increased pulling power for heavier loads. The ability to control the speed optimizes the efficiency of the winch drive by adapting to the load characteristics and operational needs.
- Drum Size and Cable Capacity:
The design of the winch drive includes considerations for the drum size and cable capacity. The drum is responsible for winding or unwinding the cable during the pulling or lifting operation. A larger drum diameter allows for a greater length of cable to be wound, which increases the pulling capacity of the winch. The drum design should also ensure proper cable alignment and smooth winding to prevent cable damage or entanglement. By optimizing the drum size and cable capacity, the winch drive can efficiently handle the load and accommodate the necessary cable length required for the task.
- Braking System:
An efficient winch drive incorporates a reliable braking system. The braking system is designed to hold the load securely when the winch is not actively pulling or lifting. It prevents the load from slipping or releasing unintentionally, ensuring safety and stability during operation. The braking system should engage quickly and provide sufficient holding force, even in the event of power loss or sudden load changes. A well-designed braking system contributes to the efficiency of load lifting and pulling by maintaining control and preventing accidents or damage.
- Control System and Safety Features:
The design of the winch drive includes a control system with intuitive controls and safety features. The control system allows the operator to manage the operation of the winch drive, including start/stop functions, direction control, and speed adjustment. Clear and user-friendly controls enhance operational efficiency and facilitate precise load handling. Additionally, safety features such as overload protection, emergency stop mechanisms, and limit switches are integrated into the winch drive design to ensure safe operation and prevent damage to the equipment or injury to personnel.
By considering power and torque requirements, gearing and speed control, drum size and cable capacity, braking systems, control systems, and safety features, the design of a winch drive contributes to efficient load lifting and pulling. These design elements work together to optimize performance, control, and safety, allowing the winch drive to handle loads effectively and reliably in various applications and industries.
editor by CX 2024-04-02
China ND Aluminum Alloy Nmrv Series Speed Reduce Worm Gear Box for Single Screw Extruder worm gearbox calculation
Item Description
Item Description
Firm Profile
In 2571, HangZhou CZPT Machinery Co.,ltd was established by Ms. Iris and her 2 partners(Mr. Tian and Mr. Yang) in HangZhou Town, ZHangZhoug province, China, all 3 Founders are engineers who have a lot more than averaged 30 a long time of experience.
We, CZPT equipment recognized a total quality administration method and sales provider community to give clients with higher-quality goods and satisfactory support. Our merchandise are offered in 36 nations and locations in the world, our major marketplace is the European industry.
Manufacturing facility & Workshop
Professional
thirty a long time expertise engineman. R&D business office, Check laboratory, CNC lathe workshop operated by specialists.
Accountable
2~10years guarantee. Attitude establishes everything, specifics figure out accomplishment or failure. We are dependable for your goods.
Scientific management
a hundred% examined. Rigid firm method and scientific materials administration will reduce the mistake charge.
Certifications
We’re operating on research and production all types of gearbox reducer and mechanical areas these eleven many years, and have received certificates including ISO9001, numerous Gearbox Patents, SGS, BV, and so on.
Sample Space
By means of our CZPT manufacturer ND, CZPT Equipment delivers agricultural options to agriculture machinery manufacturer and distributors CZPT via a entire line of spiral bevel / straight bevel / spur gearboxes, drive shafts, sheet metal, hydraulic cylinder, motors, tyre, worm gearboxes, worm operators and so forth. Items can be customized as ask for.
FAQ
Q: Are you buying and selling organization or company ?
A: We are just a factory.
Q: Do you supply samples ? is it cost-free or further ?
A: Indeed, we could supply the sample for free of charge cost but do not pay the price of freight.
Q: How extended is your shipping time ? What is your phrases of payment ?
A: Usually it is forty-forty five times. The time may possibly range dependent on the solution and the stage of customization. For common goods, the payment is: thirty% T/T in advance, equilibrium ahead of shippment.
Q: What is the precise MOQ or price tag for your solution ?
A: As an OEM business, we can give and adapt our items to a wide range of needs.Therefore, MOQ and price tag could significantly differ with dimension, content and even more specs For occasion, high priced goods or common goods will generally have a reduce MOQ. Make sure you make contact with us with all related information to get the most precise quotation.
If you have yet another concern, please come to feel free of charge to speak to us.
|
/ Piece | |
50 Pieces (Min. Order) |
###
| Application: | Motor, Machinery, Agricultural Machinery, Industrial, etc |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Layout: | Shaft L Type |
| Gear Shape: | Conical – Cylindrical Gear |
| Step: | Single-Step |
###
| Customization: |
|---|
|
/ Piece | |
50 Pieces (Min. Order) |
###
| Application: | Motor, Machinery, Agricultural Machinery, Industrial, etc |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Layout: | Shaft L Type |
| Gear Shape: | Conical – Cylindrical Gear |
| Step: | Single-Step |
###
| Customization: |
|---|
Worm gear reducer gearbox
A worm gear reducer gearbox is a gear reducer gearbox that uses a worm gear train to reduce the required force. Unlike traditional gear reducer gearboxes, these units are small and require low horsepower ratings. This reduces their efficiency, but their low cost and compact design help make up for this shortcoming. However, these gear reducer gearboxes have some drawbacks, including their tendency to lock up when reversing.
high efficiency
High-efficiency worm reducer gearboxes are ideal for applications where high performance, repeatability, and accuracy are critical. It consists of an input hypoid gear and an output hypoid bevel gear. The input worm rotates perpendicular to the output worm, so for every revolution of the input worm, the output gear makes one revolution. This arrangement reduces friction (another source of energy loss) in a high-efficiency worm gear to at least two arc minutes.
Compared with worm gear reducer gearboxes, hypoid gearmotors offer several advantages, including lower operating costs and higher efficiency. For example, hypoid gear motors can transmit more torque even at high reduction ratios. Also, they are more efficient than worm gear reducer gearboxes, which means they can produce the same output with a smaller motor.
In recent years, the efficiency of worm gear reducer gearboxes has been dramatically improved. Manufacturers have made great strides in materials, design, and manufacturing. New designs, including dual-enveloping worm gear reducer gearboxes, increase efficiency by 3 to 8 percent. These improvements were made possible through countless hours of testing and development. Worm gear reducer gearboxes also offer lower initial costs and higher overload capability than competing systems.
Worm gear reducer gearboxes are popular because they provide maximum reduction in a small package. Their compact size makes them ideal for low to medium-horsepower applications and they are reticent. They also offer higher torque output and better shock load tolerance. Finally, they are an economical option to reduce the device’s power requirements.
low noise
Low-noise worm gear reducer gearboxes are designed to reduce noise in industrial applications. This type of reducer gearbox uses fewer bearings and can work in various mounting positions. Typically, a worm reducer gearbox is a single-stage unit with only one shaft and one gear. Since there is only one gear, the noise level of the worm gear reducer gearbox will be lower than other types.
A worm gear reducer gearbox can be integrated into the electric power steering system to reduce noise. Worm reducer gearboxes can be made and from many different materials. The following three-stage process will explain the components of a low-noise worm reducer gearbox.
Worm gear reducer gearboxes can be mounted at a 90-degree angle to the input worm shaft and are available with various types of hollow or solid output shafts. These reducer gearboxes are especially beneficial for applications where noise reduction is essential. They also have fewer parts and are smaller than other types of reducer gearboxes, making them easier to install.
Worm gear reducer gearboxes are available from various manufacturers. Due to their widespread availability, gear manufacturers maintain extensive inventories of these reducer gearboxes. The worm gear ratio is standard, and the size of the worm gear reducer gearbox is universal. Also, worm gear reducer gearboxes do not need to be sized for a specific purpose, unlike other load interruptions.
A worm gear reducer gearbox is a transmission mechanism with a compact structure, large transmission ratio, and self-locking function under certain conditions. The worm gear reducer gearbox series products are designed with American technology and have the characteristics of stable transmission, strong bearing capacity, low noise, and compact structure. In addition, these products can provide a wide range of power supplies. However, these worm reducer gearboxes are prone to leaks, usually caused by design flaws.
Worm gear reducer gearboxes are available in single-stage and double-stage. The first type consists of an oil tank that houses the worm gear and bearings. The second type uses a worm gear with a sleeve for the first worm gear.
When choosing a gear reducer gearbox, it is essential to choose a high-quality unit. Improper gear selection can cause rapid wear of the worm gear. While worm gear reducer gearboxes are generally durable, their degree of wear depends on the selection and operating conditions. For example, overuse, improper assembly, or working in extreme conditions can lead to rapid wear.
Worm reducer gearboxes reduce speed and torque. Worm gears can be used to reduce the speed of rotating machines or inertial systems. Worm gears are a type of bevel gear, and their meshing surfaces have great sliding force. Because of this, worm gears can carry more weight than spur gears. They are also harder to manufacture. However, the high-quality design of the worm gear makes it an excellent choice for applications requiring high torque and high-speed rotation.
Worm gears can be manufactured using three types of gears. For large reduction ratios, the input and output gears are irreversible. However, the worm reducer gearbox can be constructed with multiple helices. The multi-start worm drive also minimizes braking effects.
Self-locking function
The worm reducer gearbox is self-locking to prevent the load from being driven back to the ground. The self-locking function is achieved by a worm that meshes with the rack and pinion. When the load reaches the highest position, the reverse signal is disabled. The non-locking subsystem back-drives the load to its original position, while the self-locking subsystem remains in its uppermost position.
The self-locking function of the worm reducer gearbox is a valuable mechanical feature. It helps prevent backing and saves the cost of the braking system. Additionally, self-locking worm gears can be used to lift and hold loads.
The self-locking worm gear reducer gearbox prevents the drive shaft from driving backward. It works with the axial force of the worm gear. A worm reducer gearbox with a self-locking function is a very efficient machine tool.
Worm gear reducer gearboxes can be made with two or four teeth. Single-ended worms have a single-tooth design, while double-ended worms have two threads on the cylindrical gear. A multi-boot worm can have up to four boots. Worm reducer gearboxes can use a variety of gear ratios, but the main advantage is their compact design. It has a larger load capacity than a cross-shaft helical gear mechanism.
The self-locking function of the worm reducer gearbox can also be used for gear sets that are not necessarily parallel to the shaft. It also prevents backward travel and allows forward travel. The self-locking function is achieved by a ratchet cam arranged around the gear member. It also enables selective coupling and decoupling between gear members.
high gear ratio
Worm reducer gearboxes are an easy and inexpensive way to increase gear ratios. These units consist of two worm gears – an input worm gear and an output worm gear. The input worm rotates perpendicular to the output worm gear, which also rotates perpendicular to itself. For example, a 5:1 worm gearbox requires 5 revolutions per worm gear, while a 60:1 worm gearbox requires 60 revolutions. However, this arrangement is prone to inefficiency since the worm gear experiences only sliding friction, not rolling friction.
High-reduction applications require many input revolutions to rotate the output gear. Conversely, low input speed applications suffer from the same friction issues, albeit with a different amount of friction. Worms that spin at low speeds require more energy to maintain their movement. Worm reducer gearboxes can be used in many types of systems, but only some are suitable for high-speed applications.
Worm gears are challenging to produce, but the envelope design is the best choice for applications requiring high precision, high efficiency, and minimal backlash. Envelope design involves modifying gear teeth and worm threads to improve surface contact. However, this type of worm gear is more expensive to manufacture.
Worm gear motors have lower initial meshing ratios than hypoid gear motors, which allows the use of smaller motors. So a 1 hp worm motor can achieve the same output as a 1/2 hp motor. A study by Agknx compared two different types of geared motors, comparing their power, torque, and gear ratio. The results show that the 1/2 HP hypoid gear motor is more efficient than the worm gear motor despite the same output.
Another advantage of the worm gear reducer gearbox is the low initial cost and high efficiency. It offers high ratios and high torque in a small package, making it ideal for low to medium-horsepower applications. Worm gear reducer gearboxes are also more shock-resistant.
editor by CX 2023-04-06
China Custom Precision Production of Stainless Steel Worm Wheel and Worm Screw shaft double stage worm gearbox
Situation: New
Warranty: 1 Calendar year
Relevant Industries: Building Material Retailers, Producing Plant, Machinery Mend Stores, Building performs
Excess weight (KG): one
Showroom Spot: Germany
Online video outgoing-inspection: Supplied
Machinery Examination Report: Offered
Marketing Kind: Regular Solution
Warranty of core components: 1 Calendar year
Core Parts: PLC, Engine, Bearing, Gearbox, Motor, Stress vessel, Equipment, Pump
Construction: Flexible
Content: metal, Stainless steel, Custom, Personalized
Coatings: Custom
Torque Capability: Customized
Product Quantity: Customized
Good quality: OEM Regular
Provider: OEM Personalized Companies
Supply time: 7-25days
Surface area: Ideal Visual appeal
Gear: CNC Turning Milling Machining Equipments
Dimensions: Tailored Dimension
MOQ: 10pcs
Drawing Structure: 2d/3D PDF/CAD/Stage
Tolerance: .003mm~.005mm
Packaging Specifics: 1.Plastic bag or plastic wrap inside of, carton outside2.The bundle of Brass Turning Device Spare Components as customers’ prerequisite
Port: HangZhou,HangZhou,Hong Kong
Production Approach Grinding equipment storeSpecializing in the manufacturing of different substantial-precision personalized shaft elements German Zeiss CMM, to supply promise for your good quality Expert high quality inspection products and staff to give high-high quality merchandise
| Product Kind | engine shaft, steel shaft, For SUR-RON Mild Bee X Motor Pulley Guard Decorative Sprocket Include E-bicycle Off-highway Dirtbike Bike components shafts for treadmills, flexible shaft |
| Floor Treatment method | heat remedy |
| Drawing Structure | PDF,DWG,action |
| Software | Automotive, Automation, Check systems, Sensors, Healthcare, Athletics, Buyer, Property equipment,Digital, Pumps, Computers, Electricity andvitality, Architecture, Printing, Meals, Textile machinery, ever-power Hot Sale Udl Series Infinite Sturdy Pace Variator Transmission Gearbox Pace Reducer Optical, Lighting, Protection and safety, AOI, CZPT tools, and so forth. |
| Bundle | protective packing |
| sample | 7—10 times |
| Certificate | ISO,SGS |
| Production Potential | 100,000 parts for every month |
| Our Support | CNC Machining,Plastic Injection,Stamping,Die Casting,Silicone And Rubber,Aluminum Extrusion,Mould Creating,etc |
Worm reducer gearbox – What You Need to Know
When shopping for a Worm reducer gearbox, it is important to consider the functions and features of the unit. It is also important to take into account its cost. We will take a look at the different types of worm reducer gearboxes and the applications that they can be used for. This will help you choose the right unit for your application.
Features
Worm gears are popular in instruments that require fast stopping, such as elevators and lifts. Their soft materials allow them to absorb shock, which reduces the likelihood of failure. They are also beneficial in heavy-duty machines, such as rock crushers. Some manufacturers offer special worms with zero backlash and high-accuracy reduction.The worm reducer gearbox has a variety of features, including an axial pitch and a circular pitch. The axial pitch of the worm must match the circular pitch of the larger gear. Its threads are left or right-handed, and its lead angle is the distance a point on the thread travels during a revolution of the worm.The worm gear reducer gearbox is widely available, and gear manufacturers typically maintain a large inventory of them. Because worm gears are standardized, their mounting dimensions are generally uniform across manufacturers. This means that choosing one will not require you to change the height, length, or diameter of the output shaft. Worm gear reducer gearboxes also have dimensional consistency.Worm gears are very efficient. They have a high load capacity and a low friction coefficient. The worm gears also have a precise tooth profile, which reduces speed fluctuations and allows for quiet operation.
Functions
Worm gears have different functions. They can be used in a variety of applications. For instance, they can be used in elevators to reduce the load on the elevator. These gears also have low noise levels because they are made of dissimilar metals. Moreover, these gears can be used in elevators because they are suitable for this type of application. However, they need a single stage reducer gearbox to function properly.Another important feature of a worm reducer gearbox is that it can operate in reverse. This means that the input shaft turns backwards, while the output shaft rotates forwards. Examples of such applications include hand-cranked centrifuges, blacksmithing forge blowers, and the wind governor of musical boxes. Worm gears are available in different shapes and sizes, from gearsets to housed units. They can also be configured as multi-speed designs. Some manufacturers also offer special precision and zero-backlash worms.A worm reducer gearbox’s tooth form is important in determining the capacity of the device. Typically, a single-lead worm gear has the same lead on the left and right tooth surfaces, although a dual-lead worm gear has different leads on each side. This feature helps to eliminate play in the worm gear. However, it is important to note that a worm reducer gearbox can be manufactured with different tooth shapes for different applications.The worm gear is an alternative to conventional gears. It operates in a similar fashion to ordinary gear drives. The main advantage of a worm gear is that it is able to reduce the rotational speed and torque of a rotating shaft. It also has the added benefit of being able to transfer motion at an angle of 90 degrees. The only drawback of a worm gear is that it cannot reverse motion.
Applications
This market report analyzes the Worm reducer gearbox market from a global perspective. It includes a comprehensive analysis of the current market trends and future growth prospects. It also provides information about the competitive landscape and the main players in the industry. The report also highlights the key factors affecting the growth of the Worm reducer gearbox market.
The major regional markets for the Worm reducer gearbox include North America, Asia-Pacific, the Middle East and Africa, Latin America, and Europe. The market in these regions is likely to remain stable with a limited growth over the next few years. A worm gear is a small mechanical device that is connected to a larger gear. When connected together, it produces a low output speed but high torque.The gearing on a worm drive can be right-hand or left-hand, and can turn clockwise or counter-clockwise. Depending on the worm’s helix angles, back-driving and friction can be reduced. Worm gears are available in housed units or in gearsets. Some manufacturers offer integrated servomotors and multi-speed designs. High-accuracy and zero-backlash worms are available.Worm gears are particularly popular in instruments that require fast stops. They are also commonly found in elevators and lifts. Their soft nature and low-shock characteristics make them highly suitable for these types of machines.
Cost
Cost is an important consideration when selecting a worm reducer gearbox. The initial cost of a worm gear reducer gearbox is considerably lower than other types of gear reducer gearboxes. Worm gear reducer gearboxes are also more energy-efficient, and have higher overload capacities than competitive systems. The following are factors that affect the cost of a worm gear reducer gearbox.Stainless steel worm gear reducer gearboxes from Agknx offer great value for the money. They offer flange input and hollow output bore sizes, as well as center distances ranging from 1.75″ to 3.25″. In addition to the standard version, a stainless steel bushing kit is available, which allows users to use a wider range of head shaft sizes. Stainless steel worm gear reducer gearboxes are available in stock from all six of Agknx’s regional warehouses. They also come with free prepaid freight.Worm gear reducer gearboxes are often used in power transmission systems, elevators, conveyor belts, and medical equipment. In these applications, they are used to control the speed of a load and prevent it from freefall. While worm gear reducer gearboxes are not as efficient as helical gearboxes, they are still very useful for applications that require high torque or high output rates.To select the right type of worm for your application, you should consider the number of teeth it contains. It’s best to select worms with a combined total of 40 teeth or more.
aspect
Worm reducer gearboxes vary in size. They have one, two or more threads. Each thread has a lead angle. A high ratio has more teeth than a low gear, and a low ratio has fewer teeth. These differences are the result of gearing. The size of the worm gear reducer gearbox should be selected according to the specific application.The worm gear reducer gearbox saves space and provides more torque. Agknx Gearbox has created a variety of models to overcome common deceleration challenges, from standard to hygienic markets. The superior transmission Agknx range is designed to solve common deceleration challenges and expand to meet the needs of the sanitary industry.The diameter of the worm reducer gearbox is an important consideration. Its diameter should be equal to or slightly larger than the diameter of the grinding wheel or tool. This will affect the pressure angle. The pressure angle on a worm reducer gearbox depends on several factors, including its diameter and lead angle. The diameter of the grinding wheel or tool also has an effect on the profile of the worm.Worm gear reducer gearboxes are common. Many gear manufacturers have large stocks of these gear reducer gearboxes. Since gears are standardized, the mounting dimensions of worm gears are also common among manufacturers. This makes it easy to select a worm gear reducer gearbox for your application. In addition, the worm gear reducer gearbox is easy to install and maintain.
Worm gear reducer gearbox oil
Worm gear reducer gearboxes usually use gear oil. Several types of gear oils are available, including synthetic, polyalkylene glycol, and mineral oils. The oil used in the worm gear reducer gearbox must have the right viscosity for the gear. Some oils are more corrosive than others and should be avoided if the environment is toxic.The oil of the worm gear reducer gearbox must be protected against corrosion, wear and friction. It is best to choose a lubricant with low friction rate, high oxidation resistance and good anti-wear protection. While mineral oils are the most common type of lubricant, synthetic base oils can improve gear efficiency and reduce operating temperatures. This is because the Arrhenius rate rule states that the chemical reaction in the oil doubles for every 10 degrees Celsius increase in temperature.Worm gear reducer gearboxes are available in a variety of sizes and configurations. They are suitable for all kinds of machines and equipment. The sliding action between the worm gear and the output shaft produces high torque and high efficiency. If the transmission speed is low, the worm gear and output shaft can be combined for maximum efficiency.Worm gear reducer gearboxes require less frequent oil changes than other types of gear reducer gearboxes. However, regular oil should be changed every six months or 2,500 hours, whichever comes first. Also, it is a good idea to regularly monitor the oil level to prevent lubrication-related gearbox failures. It’s also wise to use synthetic oil, as it will last longer between oil changes.
editor by czh 2023-02-10
China Twin Screw Extruder Twin Screw High Torque Gearbox for Extruder worm gearbox exploded view
Product Description
Solution Description
Twin Screw Extruder Twin Screw Gearbox Higher Torque Gearbox
Twin Screw Gearbox Features
— Higher Pace
—Triaxiality parallel layout increase B axis bearing capability.
—Challengling manufacture and practical assemply.Higher the cost.
—Modular structure design and style achieve 2 varieties of gearbox torque grade.
Twin Screw Gearbox Introduction
Twin Screw Gearbox adopting most current common ISO1328,the precision of cylindrical gear of spherical involute, and combining our prolonged phrase encounter and specialty of twin-screw extruders, SHTDN gearboxes are meticulously created with leading innovative creating tips in the planet for co-oriented rotating twin-screw extruders, with fully independent Intellectual Property Rights.
The gears are produced of carburizing metal of high-strength alloy of good good quality by carburizing and quenching for enamel, of which all the equipment grinding processes are finished by imported gear grinding equipment. Gear parameters are optimized and specifically developed for the qualities of twin screw extruders, reducing anxiety focus on root of equipment and strengthening equipment floor problems. We have improved equipment intension of flexural fatigue, fatigue strength and ratio of extensive diameter. We have also adopted the most current creating notion and technological innovation of heating therapy for the framework of gears, therefore ensured gears from uniformity of precision and power.
SHTDN Large Torque Gearbox Info Desk
|
SHTDN Gearbox Energy&Torque Desk |
||||||||
|
Model |
CD(MM) |
Torque Quality(T/A3) |
RPM 300r/min |
RPM 400r/min |
RPM 500r/min |
RPM 600r/min |
RPM 800r/min |
RPM 900r/min |
|
SHTD20N |
eighteen |
<13 |
— |
— |
— |
7.5kw |
11kw |
— |
|
SHTD25N |
22 |
<13 |
— |
— |
11kw |
15kw |
eighteen.5kw |
22kw |
|
SHTD30N |
26 |
<13 |
— |
— |
— |
22kw |
30kw |
37kw |
|
SHTD35N |
thirty |
<13 |
18.5kw |
22kw |
30kw |
37kw |
50kw |
60kw |
|
SHTD40N |
34.5 |
<13 |
30kw |
45kw |
55kw |
65kw |
90kw |
90kw |
|
SHTD50N |
42 |
<13 |
55kw |
75kw |
90kw |
110kw |
132kw |
160kw |
|
SHTD52N |
forty three |
<13 |
55kw |
75kw |
90kw |
110kw |
132kw |
160kw |
|
SHTD58N |
48 |
<13 |
90kw |
110kw |
132kw |
160kw |
220kw |
250kw |
|
SHTD65N |
52 |
<13 |
110kw |
132kw |
160kw |
220kw |
280kw |
315kw |
|
SHTD75N |
60 |
<13 |
160kw |
220kw |
250kw |
315kw |
450kw |
500kw |
|
SHTD85N |
67.8 |
<13 |
220kw |
315kw |
400kw |
500kw |
600kw |
650kw |
|
SHTD95N |
seventy eight |
<13 |
350kw |
450kw |
550kw |
650kw |
900kw |
1000kw |
|
SHTD110N |
ninety two |
<13 |
560kw |
710kw |
900kw |
1000kw |
— |
— |
|
SHTD125N |
one hundred |
<13 |
800kw |
1000kw |
1250kw |
1400kw |
— |
— |
|
SHTD135N |
110 |
<13 |
1000kw |
1400kw |
1600kw |
2000kw |
— |
— |
|
SHTD150N |
120 |
<13 |
1320kw |
1750kw |
— |
— |
— |
— |
Manufacturing Method
Packing&Supply
Packing Information: According to your purchase quantity packaging,transport wood packing containers,air carton.
Shipping Information: 5-60days soon after buy.
|
1.Rust-proof oil processing, Prevent rust in transit. |
2.Oiled paper offers, Prevent oil dry. |
three.Bubble wrap package, Prevent collosions. |
| 4.Particular foam packaging. | five.Packing | six.Sealing |
Our Support
|
24-hour Hotline
No make a difference when and the place to phone we can find our support to you.
|
Pre-product sales Session
We have 5 sales men and women on-line, and whether or not you have any query can be solved by means of online interaction,welcome your session. |
After-product sales Providers
Receive goods have any queries about the merchandise, can search for us,we will assist you offer with the the first time,to your pleasure. |
|
All ZT hold pay out attention to each and every step of the specifics,We are looking ahead to the forge in advance with each other with you!
|
||
FAQ
How lengthy does it just take to get my merchandise because I paid for them?
—In accordance to yout buy amount,we will give you a reasonable shipping day.
Can I get the warranty of 1 year for cost-free?
—If you want the guarantee,you need to shell out for it.If not,do not fret ,we have self-confidence in our merchandise.
How is your after-sale provider?
—You will get our assist in time as lengthy as you locate anything improper about our generates.Imagine us,you are worthy of the best.
How extended will your item final?
—I am sorry that I can not accurately reply your query,which is very various from your operation time,supplies and components.
| Application: | Machinery |
|---|---|
| Function: | Speed Reduction |
| Layout: | Double Drive Gearbox |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
###
| Customization: |
Available
|
|---|
###
|
SHTDN Gearbox Power&Torque Table
|
||||||||
|
Model
|
CD(MM)
|
Torque Grade(T/A3)
|
RPM 300r/min
|
RPM 400r/min
|
RPM 500r/min
|
RPM 600r/min
|
RPM 800r/min
|
RPM 900r/min
|
|
SHTD20N
|
18
|
<13
|
—
|
—
|
—
|
7.5kw
|
11kw
|
—
|
|
SHTD25N
|
22
|
<13
|
—
|
—
|
11kw
|
15kw
|
18.5kw
|
22kw
|
|
SHTD30N
|
26
|
<13
|
—
|
—
|
—
|
22kw
|
30kw
|
37kw
|
|
SHTD35N
|
30
|
<13
|
18.5kw
|
22kw
|
30kw
|
37kw
|
50kw
|
60kw
|
|
SHTD40N
|
34.5
|
<13
|
30kw
|
45kw
|
55kw
|
65kw
|
90kw
|
90kw
|
|
SHTD50N
|
42
|
<13
|
55kw
|
75kw
|
90kw
|
110kw
|
132kw
|
160kw
|
|
SHTD52N
|
43
|
<13
|
55kw
|
75kw
|
90kw
|
110kw
|
132kw
|
160kw
|
|
SHTD58N
|
48
|
<13
|
90kw
|
110kw
|
132kw
|
160kw
|
220kw
|
250kw
|
|
SHTD65N
|
52
|
<13
|
110kw
|
132kw
|
160kw
|
220kw
|
280kw
|
315kw
|
|
SHTD75N
|
60
|
<13
|
160kw
|
220kw
|
250kw
|
315kw
|
450kw
|
500kw
|
|
SHTD85N
|
67.8
|
<13
|
220kw
|
315kw
|
400kw
|
500kw
|
600kw
|
650kw
|
|
SHTD95N
|
78
|
<13
|
350kw
|
450kw
|
550kw
|
650kw
|
900kw
|
1000kw
|
|
SHTD110N
|
92
|
<13
|
560kw
|
710kw
|
900kw
|
1000kw
|
—
|
—
|
|
SHTD125N
|
100
|
<13
|
800kw
|
1000kw
|
1250kw
|
1400kw
|
—
|
—
|
|
SHTD135N
|
110
|
<13
|
1000kw
|
1400kw
|
1600kw
|
2000kw
|
—
|
—
|
|
SHTD150N
|
120
|
<13
|
1320kw
|
1750kw
|
—
|
—
|
—
|
—
|
###
 |
|
|
###
|
1.Rust-proof oil processing, Prevent rust in transit. |
2.Oiled paper packages, Prevent oil dry. |
3.Bubble wrap package, Prevent collosions. |
| 4.Special foam packaging. | 5.Packing | 6.Sealing |
###
|
24-hour Hotline
No matter when and where to call we can find our service to you.
|
Pre-sales Consultation
We have five sales people online, and whether you have any question can be solved through online communication,welcome your consultation. |
After-sales Services
Receive products have any questions about the product, can look for us,we will help you deal with the the first time,to your satisfaction. |
|
All ZT keep pay attention to every step of the details,We are looking forward to the forge ahead together with you!
|
||
| Application: | Machinery |
|---|---|
| Function: | Speed Reduction |
| Layout: | Double Drive Gearbox |
| Hardness: | Hardened Tooth Surface |
| Installation: | Horizontal Type |
| Step: | Three-Step |
###
| Customization: |
Available
|
|---|
###
|
SHTDN Gearbox Power&Torque Table
|
||||||||
|
Model
|
CD(MM)
|
Torque Grade(T/A3)
|
RPM 300r/min
|
RPM 400r/min
|
RPM 500r/min
|
RPM 600r/min
|
RPM 800r/min
|
RPM 900r/min
|
|
SHTD20N
|
18
|
<13
|
—
|
—
|
—
|
7.5kw
|
11kw
|
—
|
|
SHTD25N
|
22
|
<13
|
—
|
—
|
11kw
|
15kw
|
18.5kw
|
22kw
|
|
SHTD30N
|
26
|
<13
|
—
|
—
|
—
|
22kw
|
30kw
|
37kw
|
|
SHTD35N
|
30
|
<13
|
18.5kw
|
22kw
|
30kw
|
37kw
|
50kw
|
60kw
|
|
SHTD40N
|
34.5
|
<13
|
30kw
|
45kw
|
55kw
|
65kw
|
90kw
|
90kw
|
|
SHTD50N
|
42
|
<13
|
55kw
|
75kw
|
90kw
|
110kw
|
132kw
|
160kw
|
|
SHTD52N
|
43
|
<13
|
55kw
|
75kw
|
90kw
|
110kw
|
132kw
|
160kw
|
|
SHTD58N
|
48
|
<13
|
90kw
|
110kw
|
132kw
|
160kw
|
220kw
|
250kw
|
|
SHTD65N
|
52
|
<13
|
110kw
|
132kw
|
160kw
|
220kw
|
280kw
|
315kw
|
|
SHTD75N
|
60
|
<13
|
160kw
|
220kw
|
250kw
|
315kw
|
450kw
|
500kw
|
|
SHTD85N
|
67.8
|
<13
|
220kw
|
315kw
|
400kw
|
500kw
|
600kw
|
650kw
|
|
SHTD95N
|
78
|
<13
|
350kw
|
450kw
|
550kw
|
650kw
|
900kw
|
1000kw
|
|
SHTD110N
|
92
|
<13
|
560kw
|
710kw
|
900kw
|
1000kw
|
—
|
—
|
|
SHTD125N
|
100
|
<13
|
800kw
|
1000kw
|
1250kw
|
1400kw
|
—
|
—
|
|
SHTD135N
|
110
|
<13
|
1000kw
|
1400kw
|
1600kw
|
2000kw
|
—
|
—
|
|
SHTD150N
|
120
|
<13
|
1320kw
|
1750kw
|
—
|
—
|
—
|
—
|
###
|
|
|
###
|
1.Rust-proof oil processing, Prevent rust in transit. |
2.Oiled paper packages, Prevent oil dry. |
3.Bubble wrap package, Prevent collosions. |
| 4.Special foam packaging. | 5.Packing | 6.Sealing |
###
|
24-hour Hotline
No matter when and where to call we can find our service to you.
|
Pre-sales Consultation
We have five sales people online, and whether you have any question can be solved through online communication,welcome your consultation. |
After-sales Services
Receive products have any questions about the product, can look for us,we will help you deal with the the first time,to your satisfaction. |
|
All ZT keep pay attention to every step of the details,We are looking forward to the forge ahead together with you!
|
||
Is a worm gear reducer gearbox right for your application?
If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
This is a reducer gearbox
Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.
Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
It is high efficiency
When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.
It has a low clearance
Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
It has a high torque to weight ratio
The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.
editor by czh 2023-01-04
china manufacturer manufacturer Cost Screw Band Worm Drive Hose Clips German Type Hose Clamps manufacturers
Item Description
American design hose clamps are chosen by the CZPT ican markets.The CZPT -preforated and rolled band shields the soft-hoses area from shearing throughout set up.This design of hose clamp is generally utilized in automotive,industrial,mining,maritime and basic components applictions.
one.Use the open inner and exterior circle composition,and with screw set.It is efficiently to fix the issue that when modest diameter solft tube hook up the hared tube,it is simple show up lifeless angle,and liquid or gasoline leakage problem.Simple framework,Simple maked.
2.Edge is no burrfree,it is capability to avert the tube broken
three.By a successfully hydrogen aid remedy,long-phrase use needn’t to fret fracture and other troubles
four.Accord with DIN3017 Common.By forty eight several hours salt and fog check,it has a excellent corrosion resistance
five.By very last 36 hrs elastic take a look at,to insure a higher toughness mechanical properties.
six.Easy to resolve.
|
Merchandise Title |
China manufacturing unit value 1/4 316 CZPT Metal rapid release hydraulic CZPT Duty pipe clamp CZPT ican Sort Sizzling hose clip CZPT Clamp |
|
Measurement |
from 13mm to 509mm |
|
Materials |
Stainless Steel,Alloy metal,Carbon Metal,Brass,Aluminum and So on |
|
Grade |
four.8,8.8,10.9,twelve.9.and so on |
|
Normal |
GB, DIN, ISO, ANSI/ASTM, BS, BSW, JIS and so on |
|
Non-expectations |
OEM is CZPT , according to drawing or samples |
|
End |
Plain, black, zinc plated/in accordance to your necessity |
|
Machining Tools |
Machining Heart / CNC Lathes / Grinding CZPT s / Milling CZPT s / Lathes / Wire-cuts / CZPT Cuts / CNC Shearing CZPT s / |
|
Certification |
ISO9001,IATF16949, |
|
Package deal |
in accordance to CZPT ers need |
The push aspect is a worm. In get to mix the wheel/worm into a worm equipment, it have to be ensured that the centre length is equal and the transmission ratio is equal. Centre distances are offered from inventory in tiny steps among 17mm and 80mm. Each and every centre distance has multiple equipment ratios. Ep worm gears are suitable for the manufacturing of worm drives with a shaft angle of 90°. Using a worm travel, quite huge reduction ratios (up to 100:1) can be accomplished.
china near me Customized OEM Custom Steel Brass Accurate Machining Machined Shaft with Gear Worm Screw manufacturers
Product Description
Our Positive aspects
Our advantange, Reduced MOQ as significantly less as 1 piece, one hundred% inspection, Limited CZPT time.
Our service
We manufacture CZPT shafts manufactured according to drawing, which includes roud shaft, sq. shaft, hollow shaft, screw shaft, spline shaft, gear shaft, etc.
| Materials | Alloy, stainless steel, Carbon steel, and so on. |
| Mahines | NC lathe, Milling macine, Ginder, CNC, Gear milling machine. |
| 3rd get together inspection | Accessible, SGS, CNAS, BV, and many others. |
| UT regular | ASTM A388, AS1065, GB/T6402, and so forth. |
| Packaging | Seaworthy packing |
| Drawing structure | PDF, DWG, DXF, STP, IGS, and so on. |
| Application | Market utilization, CZPT use. |
| MOQ | one piece |
| Drawing structure | PDF, DWG, DXF, STP, IGS, etc. |
| Quotation time | one days. |
| Guide time | Generaly thirty-forty days for mass creation. |
Our Merchandise
Throughout the go ten years, we have supplied hundreds of CZPT ers with perfect precision machining employment:
Workshop & machining method
We manufacture CZPT shafts manufactured according to drawing, like roud shaft, square shaft, hollow shaft, screw shaft, spline shaft, equipment shaft, and many others.
FAQ
Q: Are you treading organization or manufacturer?
A: We are maker.
Q: How about your MOQ?
A: We offer both prototype and mass generation, Our MOQ is 1 piece.
Q:How CZPT can I get a quote following RFQ?
A:we typically quotation you within 24 several hours. Far more detail info presented will be helpful to save your time.
one) detailed CZPT drawing with tolerance and other necessity.
2) the quantity you demand.
Q:How is your quality ensure?
A:we do 100% inspection just before supply, we are hunting for CZPT expression enterprise relationship.
Q:Can I sign NDA with you?
A:Confident, we will hold your drawing and information confidential.
The travel aspect is a worm. In order to mix the wheel/worm into a worm gear, it should be ensured that the heart distance is equivalent and the transmission ratio is equal. Heart distances are available from inventory in small actions amongst 17mm and 80mm. Every heart distance has multiple equipment ratios. Ep worm gears are suitable for the creation of worm drives with a shaft angle of 90°. Utilizing a worm travel, really big reduction ratios (up to a hundred:1) can be achieved.
china Custom Performance Strongest Thumb Screw Adjustable Stainless Steel Worm Gear Hose Clip manufacturers
Product Description
Detailed Pictures
Worm gear hose clamps, also referred to as radiator clamps, jubilee clips, worm push hose clamps, or screw hose clamps, are potentially the most widely utilized type of hose clamp. Worm gear hose clamps are created with a captive CZPT screw connected to a metal band.
In CZPT manufacturing unit, we have total variety of hose clamp, and personal a total inductry chain which includes molds processing, goods production, surface area therapy, rubber vulcanizing and screw production.
Merchandise methods including:
1, Germany stype CZPT -perforated kind with & with no welded hose pipe clamps,
two, CZPT fashion hose clamp,
3, MICOR perforeated hose pipe clamps,
4, CZPT ican sort perforated hose pipe clamps,
five, Swift release hose pipe clamp,
6, Constant Pressure clamps,
seven, T-Bolt hose pipe clamps,
eight, Lihgt & weighty Unitary hose pipe clamps,
nine, Double bolts & double bands super hose pipe clamps
ten, One & Double ears hose pipe clamps
11, pipe strap
twelve, hose pipe clamps with rubber
thirteen, PP & PEX snap clip
|
Content |
Band |
Housing |
Screw |
|
W1 |
Zinc plated steel |
Zinc plated steel |
Zinc plated metal |
|
W2 |
AISI 430ss/201ss |
AISI 430ss/201ss |
Zinc plated metal |
|
W3 |
AISI 301ss/304ss |
AISI 301ss/304ss |
AISI 301ss/304ss |
|
W4 |
AISI 316ss |
AISI 316ss |
AISI 316ss |
| German style hose clamp 9 & 12mm | ||||||
| Size (mm) |
W1 | W2 | W4 | W5 | Packing | |
| pcs/bag | pcs/ctn | |||||
| 8-12 | √ | √ | √ | √ | one hundred | 1000 |
| ten-16 | √ | √ | √ | √ | one hundred | one thousand |
| twelve-22 | √ | √ | √ | √ | one hundred | 1000 |
| 16-27 | √ | √ | √ | √ | 100 | one thousand |
| twenty-32 | √ | √ | √ | √ | 100 | 500 |
| twenty five-40 | √ | √ | √ | √ | one hundred | 500 |
| 30-45 | √ | √ | √ | √ | fifty | 500 |
| 35-fifty | √ | √ | √ | √ | fifty | five hundred |
| 40-sixty | √ | √ | √ | √ | 50 | 500 |
| fifty-70 | √ | √ | √ | √ | fifty | 500 |
| 60-eighty | √ | √ | √ | √ | fifty | five hundred |
| 70-90 | √ | √ | √ | √ | fifty | five hundred |
| 80-100 | √ | √ | √ | √ | fifty | five hundred |
| 90-a hundred and ten | √ | √ | √ | √ | 50 | five hundred |
| one hundred-120 | √ | √ | √ | √ | twenty five | 250 |
| 110-a hundred thirty | √ | √ | √ | √ | twenty five | 250 |
| one hundred twenty-one hundred forty | √ | √ | √ | √ | twenty five | 250 |
| one hundred thirty-150 | √ | √ | √ | √ | twenty five | 250 |
| one hundred forty-one hundred sixty | √ | √ | √ | √ | 25 | 250 |
| Welding Kind Clamps M8 With CZPT | ||||
| Model Number | D(mm) | R(mm) | INCH | Band thickness and width |
| JM-HC001519 | eighteen | 15-19 | 3/8″ | twenty*(1.2~1.5) |
| JM-HC57125 | 22 | twenty-25 | one/2″ | twenty*(1.2~1.5) |
| JM-HC002630 | 28 | 26-thirty | 3/4″ | twenty*(1.2~1.5) |
| JM-HC003236 | 35 | 32-36 | 1″ | twenty*(1.2~1.5) |
| JM-HC003843 | 40 | 38-forty three | eleven/4″ | 20*(1.2~1.5) |
| JM-HC05711 | 48 | forty seven-fifty one | 11/2″ | 20*(1.2~1.5) |
| JM-HC05718 | 54 | fifty three-fifty eight | twenty*(1.2~1.5) | |
| JM-HC006064 | sixty | sixty-sixty four | 2″ | twenty*(1.2~1.5) |
| JM-HC006872 | 70 | 68-72 | 20*(1.2~1.5) | |
| JM-HC05710 | 75 | 75-80 | 21/2″ | twenty*(1.2~1.5) |
| JM-HC008086 | 83 | 80-86 | 20*(1.2~1.5) | |
| JM-HC0 0571 two | ninety | 87-ninety two | 3″ | 20*(1.2~1.5) |
| JM-HC057105 | a hundred | ninety nine-one hundred and five | 31/2″ | twenty*(1.2~1.5) |
| JM-HC5717112 | 110 | 107-112 | 20*(1.2~1.5) | |
| JM-HC00113118 | a hundred and fifteen | 113-118 | four” | 20*(1.2~1.5) |
| JM-HC00125130 | a hundred twenty five | 125-a hundred thirty | 20*(1.2~1.5) | |
| JM-HC00132137 | 133 | 132-137 | twenty*(1.2~1.5) | |
| JM-HC00136142 | one hundred forty | 136-142 | 5″ | twenty*(1.2~1.5) |
| JM-HC00159166 | 160 | 159-166 | 6″ | 20*(1.2~1.5) |
| JM-HC5715712 | two hundred | two hundred-212 | 20*(1.2~1.5) | |
| “U”Typy Without having CZPT | ||||
| Design Quantity | D(mm) | A*B | PCS/BOX | BOX/CARTON |
| JM-HC09006 | six | 12*1.two | a hundred | 10 |
| JM-HC09008 | eight | twelve*1.two | 100 | 10 |
| JM-HC09571 | ten | 12*1.two | one hundred | 10 |
| JM-HC 0571 two | 12 | twelve*1.2 | 100 | 10 |
| JM-HC 0571 four | 14 | twelve*1.two | one hundred | 10 |
| JM-HC 0571 five | fifteen | 12*1.two | a hundred | 10 |
| JM-HC 0571 6 | 16 | 12*1.two | a hundred | 10 |
| JM-HC 0571 eight | eighteen | 15*1.two | 100 | ten |
| JM-HC09571 | twenty | fifteen*1.two | 100 | ten |
| JM-HC571 | 22 | fifteen*1.2 | one hundred | ten |
| JM-HC09571 | 24 | 15*1.2 | one hundred | 10 |
| JM-HC 0571 6 | 26 | 15*1.two | one hundred | ten |
| JM-HC09571 | 28 | fifteen*1.two | a hundred | 10 |
| JM-HC 0571 | 30 | 15*1.two | fifty | ten |
| JM-HC571 | 32 | eighteen*1.two | fifty | 10 |
| JM-HC 0571 7 | 37 | eighteen*1.2 | 50 | ten |
| JM-HC09040 | forty | eighteen*1.2 | fifty | ten |
| JM-HC09042 | 42 | eighteen*1.two | 50 | 10 |
| JM-HC09047 | 47 | 18*1.two | fifty | 10 |
| JM-HC 0571 | sixty | 18*1.2 | 50 | ten |
| Welding Type Clamps M8+ten With CZPT | ||||
| Product Amount | D(mm) | R(mm) | INCH | Band thickness and width |
| JM-HC011519 | 18 | fifteen-19 | three/8″ | 20*(1.8~2.) |
| JM-HC012571 | 22 | 20-25 | one/2″ | 20*(1.8~2.) |
| JM-HC012630 | 28 | 26-30 | three/4″ | twenty*(1.8~2.) |
| JM-HC013236 | 35 | 32-36 | 1″ | 20*(1.8~2.) |
| JM-HC013843 | forty | 38-forty three | 11/4″ | 20*(1.8~2.) |
| JM-HC014751 | 48 | 47-51 | 11/2″ | 20*(1.8~2.) |
| JM-HC015358 | 54 | 53-fifty eight | twenty*(1.8~2.) | |
| JM-HC016064 | sixty | 60-sixty four | 2″ | 20*(1.8~2.) |
| JM-HC016872 | 70 | sixty eight-seventy two | twenty*(1.8~2.) | |
| JM-HC017580 | 75 | 75-eighty | 21/2″ | twenty*(1.8~2.) |
| JM-HC018086 | eighty three | 80-86 | twenty*(1.8~2.) | |
| JM-HC018792 | ninety | 87-92 | three” | twenty*(1.8~2.) |
| JM-HC0199105 | 100 | ninety nine-a hundred and five | 31/2″ | twenty*(1.8~2.) |
| JM-HC0115712 | one hundred ten | 107-112 | twenty*(1.8~2.) | |
| JM-HC01113118 | 115 | 113-118 | four” | 20*(1.8~2.) |
| JM-HC01125130 | 125 | 125-130 | 20*(1.8~2.) | |
| JM-HC01132137 | 133 | 132-137 | 20*(1.8~2.) | |
| JM-HC01136142 | a hundred and forty | 136-142 | five” | 20*(1.8~2.) |
| JM-HC01159166 | 160 | 159-166 | six” | twenty*(1.8~2.) |
| JM-HC01205712 | 200 | 200-212 | 20*(1.8~2.) | |
| JM-HC01248252 | 250 | 248-252 | 20*(1.8~2.) | |
| JM-HC01312318 | 315 | 312-318 | twenty*(1.8~2.) | |
| Welding Variety Clamps M8+ten Without having CZPT | ||||
| Design Variety | D(mm) | R(mm) | INCH | Band thickness and width |
| JM-HC57119 | eighteen | 15-19 | three/8″ | 20*(1.8~2.) |
| JM-HC032571 | 22 | 20-25 | one/2″ | 20*(1.8~2.) |
| JM-HC032630 | 28 | 26-thirty | three/4″ | twenty*(1.8~2.) |
| JM-HC033236 | 35 | 32-36 | one” | twenty*(1.8~2.) |
| JM-HC033843 | forty | 38-forty three | eleven/4″ | 20*(1.8~2.) |
| JM-HC034751 | 48 | 47-51 | 11/2″ | 20*(1.8~2.) |
| JM-HC57158 | 54 | 53-58 | 20*(1.8~2.) | |
| JM-HC036064 | sixty | sixty-sixty four | 2″ | twenty*(1.8~2.) |
| JM-HC036872 | 70 | sixty eight-72 | twenty*(1.8~2.) | |
| JM-HC57180 | seventy five | seventy five-80 | 21/2″ | 20*(1.8~2.) |
| JM-HC038086 | eighty three | 80-86 | twenty*(1.8~2.) | |
| JM-HC038792 | ninety | 87-ninety two | 3″ | 20*(1.8~2.) |
| JM-HC0399105 | 100 | ninety nine-one zero five | 31/2″ | 20*(1.8~2.) |
| JM-HC571712 | a hundred and ten | 107-112 | 20*(1.8~2.) | |
| JM-HC5713118 | 115 | 113-118 | four” | 20*(1.8~2.) |
| JM-HC5715130 | a hundred twenty five | one hundred twenty five-one hundred thirty | 20*(1.8~2.) | |
| JM-HC5712137 | 133 | 132-137 | twenty*(1.8~2.) | |
| JM-HC5716142 | one hundred forty | 136-142 | 5″ | 20*(1.8~2.) |
| JM-HC5719166 | a hundred and sixty | 159-166 | 6″ | 20*(1.8~2.) |
| JM-HC03205712 | 200 | 200-212 | twenty*(1.8~2.) | |
| JM-HC03248252 | 250 | 248-252 | twenty*(1.8~2.) | |
| JM-HC03312318 | 315 | 312-318 | twenty*(1.8~2.) | |
Company Profile
Set up in 2003, HangZhou Jay&Min CZPT ware CZPT Co., Ltd. is a youthful and CZPT increasing manufacturing unit. We are a skilled company and exporter of rest room&Kitchen sanitaryware items, specially in Faucet aerator, CZPT aerator, Hand shower and all sorts of hose clamps.. We are quite powerful in R&D ability. Far more importantly, we have a focused crew who are completely ready to provide effective and specialist solutions to CZPT CZPT ers at any time. Our Controlling Section is dependable for firm operation and growth plHangZhou. Continual efforts are taken by them to make CZPT services program far more effective, thus provide CZPT CZPT ers greater. “Consumer CZPT ” is the theory that all these sections adhere to. We seem forward to constructing gratifying associations with clientele CZPT .
FAQ
1. who are we?
We are based mostly in ZHangZhoug, CZPT , start off from 2571,offer to CZPT ern CZPT pe(eleven.eleven%),Eastern Asia(eleven.11%),Mid CZPT (11.11%),Oceania(11.11%),Africa(eleven.11%),Southeast Asia(eleven.11%),Japanese CZPT pe(11.eleven%),South CZPT ica(11.eleven%),North CZPT ica(eleven.11%). There are overall about 11-50 folks in CZPT workplace.
two. how can we assure top quality?
Often a pre-production sample prior to mass manufacturing
Often last Inspection before shipment
3.what can you get from us?
Faucet Aerator,H2o conserving,LED aerator,Drain cleaner,hose clamp
four. why must you acquire from us not from other suppliers?
We are a expert manufacturer of CZPT & Lavatory sanitaryware, specially in Drinking water saving faucet aerator, CZPT swivel sprayer, LED kitchen sprayer, and all sorts of drinking water saving parts in loved ones water saving products.
five. what providers can we offer?
Acknowledged Supply Conditions: FOB,CFR,CIF,FCA
Acknowledged Payment Forex:USD,EUR,CNY
Accepted Payment Type: T/T,L/C,D/P D/A
The travel component is a worm. In buy to mix the wheel/worm into a worm equipment, it must be ensured that the center distance is equal and the transmission ratio is equal. Heart distances are accessible from stock in tiny methods amongst 17mm and 80mm. Each middle distance has numerous equipment ratios. Ep worm gears are appropriate for the manufacturing of worm drives with a shaft angle of 90°. Using a worm travel, very huge reduction ratios (up to a hundred:1) can be accomplished.