Solution Description
| BG BL 2408 | |
| Title | Note |
| DC+/DC- | DC voltage input (DC 12V~DC 32V) |
| U,V,W | Motor Phase Line |
| Hu,Hv,Hw | Hall signal of brushless DC motor |
| VCC | Hall CZPT + |
| SV | one. External speed handle potentiometer 2. Analog signal pace control input 3. PWM velocity manage sign input |
| F/R | When disconnected or high level, the motor rotates forward, F/R and COM are shorted or the reduced level motor reverses |
| EN | End sign control terminal, the motor will stop gradually when the higher stage or the port is disconnected, and the minimal amount or the EN and COM will be limited-circuited and operate usually |
| BRK | Brake signal handle terminal, substantial degree or port disconnection is typical operation, lower amount or BRK and COM brief link is CZPT braking |
| ALARM | General public port |
| Electrical Specs | ||||
| Tasks | Minimum value | Common values | Maximum value | Device |
| Enter voltage | 12 | 24 | 32 | VDC |
| Output existing | 8 | 60 | A | |
| Velocity management | 3000 | 20000 | Rpm | |
| Hall sign | 4.5 | five | 5.5 | VDC |
| Corridor travel | twenty | mA | ||
| Exterior velocity regulating potentiometer | 10 | KΩ | ||
| Bodyweight | / | |||
| Dimension | / | |||
| Manage manner | Square waves | |||
| Velocity regulation mode | -5 VDC analog enter, -100% PWM input (PWM frequency range :[1 Kz-20KHz) | |||
| More than-recent defense perform | Overcurrent defense takes place when the current exceeds the working current location price and lasts a set time | |||
| Overpressure | An overvoltage security takes place when the voltage exceeds thirty V | |||
| undervoltage | undervoltage defense when voltage is beneath ten V | |||
| Hall anomaly | Hall signal anomaly | |||
| We can also CZPT ize products according to CZPT er needs. | ||||
Set up in 1994, HangZhou BG CZPT Manufacturing unit is a specialist maker of brushless DC motors, brushed DC motors, planetary equipment motors, CZPT motors, CZPT motors and AC motors. We have a plant spot of 6000 sq. meters, numerous patent certificates, and we have the independent design and growth abilities and powerful complex force, with an annual output of more than 1 million units. Considering that the commencing of its establishment, BG motor has centered on the overall remedy of motors. We manufacture and design motors, supply professional CZPT ized solutions, reply speedily to CZPT er demands, and actively assist CZPT ers to resolve issues. Our motor goods are exported to 20 countries, like the CZPT States, Germany, CZPT , the CZPT CZPT dom, Poland, Slovenia, Switzerland, Sweden, Singapore, South Korea and many others.
Our founder, Mr. CZPT , has much more than 40 years of encounter in motor technology, and CZPT other engineers also have more than 15 several years of encounter, and 60% of CZPT staff have a lot more than 10 years of expertise, and we can assure you that the high quality of CZPT motors is leading notch.
The goods go over AGV, underwater robots, robots, sewing equipment sector, automobiles, healthcare tools, automatic doors, lifting gear, industrial products and have a wide selection of apps.
We strive for excellence in the high quality of every item, and we are only a tiny and refined company.
Our eyesight: CZPT the planet forward and make existence much better!
1. How can I use the driver for the 1st time?
A: Right after properly connecting the CZPT line, motor line, and Hall line, the external potentiometer slowly and gradually accelerates, and the motor rotates accurately, and then test the empower, route and other functions in switch. If you are unfamiliar with this solution, you must check it for the very first time before setting up it for actual use.
two. What is the effect of reverse CZPT connection?
A: Will burn up the generate immediately.
3. What is the highest voltage of the higher handle signal V?
A: The maximum voltage of the speed handle sign is 5V, exceeding this voltage will lead to the push to burn off.
four. Following the driver has been working for a CZPT time, the housing is reasonably hot, is it normal?
A: Normally, below regular temperature, functioning the shell for a CZPT time to 90 levels will not influence the overall performance.
five. The CZPT indicator is on, but the motor does not rotate and shakes. What is the reason?
A:It may be that there is an error among the period line and the Hall line. Please follow the motor manual and reconnect the CZPT to test.
6. Can I adjust the pace of my motor to 6000 with this driver?
A:The highest speed of the brushless motor is identified by the parameters of the motor by itself, and the driver can manage the motor pace from to the maximum pace.
7. I previously have a motor on my hand. How do I hook up it after getting this driver?
A:You have to very first decide the definition of the phase line and Corridor line of the motor on your hand ahead of wiring. If you are not positive, you want to question the motor company. Incorrect wiring will lead to damage to the travel.
8. Can I include some functions to this drive or create new products?
A: Indeed, please contact CZPT firm.
The efficiency of a worm equipment transmission is dependent to a huge extent on the helix angle of the worm. Multi-threaded worms and gears with higher helix angles have verified to be 25% to 50% more productive than single-threaded worms. The sliding action of the worm meshing with or meshing with the worm gear benefits in significant friction and loss of efficiency in contrast to other sorts of gears. Improve effectiveness with hardened and ground worm swap bronze worm gears.
