Product Description
WP worm gearbox is a new technology item created by our manufacturing facility on the foundation of improving WJ sequence goods and combining sophisticated systems at residence and abroad. The physical appearance adopts sophisticated sq. box composition. Its shell is made of large high quality forged iron. Little quantity, light-weight bodyweight, higher radiation efficiency, large output torque, sleek operation, lower sounds. It fits all positions.
The goods are commonly used in the producing equipments of all sorts of industries inside and outdoors China. They are the best choices for today modern services of mechanical reducing travel handle to comprehend large twisting distance, massive equipment ratio, little sounds, high performance and steadiness.
one. Attributes:
one) High top quality aluminum alloy Motovario like gear box, gentle fat and non-rusting
two) Large output torque, steady transmission with reduced sounds
three) Substantial heat-radiating deficiency, stylish condition, tough provider existence and tiny dimension
4) Suitable for omni-bearing set up
two. Positive aspects:
1) Smooth in managing and little in volume
two) Higher in radiating efficiency
three) Sturdy in support life
4) Work extended time in dreadful condition
five) Fully sealed and non-rusting
3. Set up
one)The base-plate must be plane and stoutness and the base-plate must be screwed down and shock proof.
2)The connecting shaft of prime mover, reducer and operation device must be coaxial installation.
3)The diameter tolerance zone of input and output shaft is H6, the holes of fitness(such as couplings, belt-pulley, sprocket wheel and so on) must properly mate the shaft, which prevents bearing from breakage because of over-loose mate.
four)Drivers such as sprocket wheel and gear must be fitted close to bearings in order to reduce bending stress of hanging shaft.
five)While assembling motor of WPD reducer, it is necessary that proper amount of butter applies to the warm shaft input hole and keyway, avoiding assembling too tightly and rusting after using for a long time.
6)When ordering or using all kinds of WPD type, if the motor weight is binger than the common, supporting set is required.
four. Use
Before using,please check carefully whether the reducer model, distance, ratio, input connecting method,
output shaft structure, input and output shaft direction and revolving direction accord with required.
Complex info:
Torque: 2N.m-3571N.m
Enter velocity: 1000r/min, 1500r/min
Output pace: .30-419r/min
Energy: .04KW-15KW
WP reducer, divided into standard WPS series, common WPD series, normal WPA, WPO,WPDA,WPDO,WPDS,WPDS and so on. WP worm gear and worm reducer is developed on the basis of WD reducer, the worm is produced of forty five # higher quality steel after warmth remedy processing and manufacturing, worm gear with tin bronze solid, dress in-resisting performance is excellent, especially on the bearing ability is far more clear, worm equipment and worm reducer is primarily employed in plastics, metallurgy, beverage, mining, lifting transport, chemical reduction generate building and other mechanical equipment.
Rewards
1.Sleek transmission, vibration, influence and noise are modest, velocity reduction ratio, vast versatility, can be utilised with a selection of mechanical equipment.
2.Can be a single stage of transmission to receive a bigger transmission ratio, compact structure, most versions of reducer has a very good self-locking, braking requirements of mechanical tools can conserve the braking unit
3.worm tooth tooth meshing friction reduction is massive, so the transmission effectiveness is reduce than the equipment, simple to heat and substantial temperature.
four.Higher specifications for lubrication and cooling.
five.Very good mutual compatibility, worm gear and worm are made in accordance to national specifications, bearings, oil seals and other common components.
six.The box entire body variety includes basic kind (the box body is vertical or horizontal kind with foot board) and universal sort (the box physique is cuboid, with set screw holes on several sides, without having foot board or an additional foot board, and so forth.).
seven. There are 2 connection modes of enter shaft: fundamental variety (solitary input shaft and double input shaft) and motor flange.
8. The position course of the output and enter axes is below and earlier mentioned the input axes Output shaft up and down Input axis up and down.
9. Two or 3 reducer sets can be employed to kind a multistage reducer to acquire a optimum transmission ratio.
| Design: | WP40,50,60,70,80,a hundred,one hundred twenty,one hundred thirty five,one hundred fifty five,175,200,250 |
| Ratio: | one:10,fifteen,20,twenty five,thirty,40,fifty,60 |
| Coloration: | Eco-friendly Or Customer Ask for |
| Sound: | reduced noise (<50DB) |
| Edge: | Productive and secure working |
|
Material: |
Housing:Solid iron and Copper alloy |
| Worm Equipment-Bronze 9-4# | |
| Worm with carburizing and quenching, surface area harness is 56-62HRC | |
| Shaft-chromium steel-forty five# | |
| Packing: | Carton and Wooden Situation |
| Bearing: | C&U Bearing |
| Seal: | NAK SKF |
| Certificate: | ISO9001,CE,3C,OEM |
| Warranty: | twelve months |
| Input Energy: | .06kw, .09kw, .12kw, .18kw, .25kw, .37kw, .55kw, .75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw |
| Usages: | Industrial Equipment: Foodstuff Stuff, Ceramics,CHEMICAL,Packing,Dyeing, Woodworking,Glass. |
| IEC Flange: | 56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5 |
| Lubricant: | Synthetic & Mineral |
|
US $80 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Motor, Machinery, Marine, Agricultural Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Layout: | Expansion |
| Gear Shape: | Worm |
| Step: | Single-Step |
###
| Samples: |
US$ 200/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model: | WP40,50,60,70,80,100,120,135,155,175,200,250 |
| Ratio: | 1:10,15,20,25,30,40,50,60 |
| Color: | Green Or Customer Request |
| Noise: | low noise (<50DB) |
| Advantage: | Efficient and safe operating |
|
Material: |
Housing:Cast iron and Copper alloy |
| Worm Gear-Bronze 9-4# | |
| Worm with carburizing and quenching, surface harness is 56-62HRC | |
| Shaft-chromium steel-45# | |
| Packing: | Carton and Wooden Case |
| Bearing: | C&U Bearing |
| Seal: | NAK SKF |
| Certificate: | ISO9001,CE,3C,OEM |
| Warranty: | 12 months |
| Input Power: | 0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw |
| Usages: | Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing, Woodworking,Glass. |
| IEC Flange: | 56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5 |
| Lubricant: | Synthetic & Mineral |
|
US $80 / Piece | |
1 Piece (Min. Order) |
###
| Application: | Motor, Machinery, Marine, Agricultural Machinery |
|---|---|
| Hardness: | Hardened Tooth Surface |
| Installation: | Vertical Type |
| Layout: | Expansion |
| Gear Shape: | Worm |
| Step: | Single-Step |
###
| Samples: |
US$ 200/Piece
1 Piece(Min.Order) |
|---|
###
| Customization: |
Available
|
|---|
###
| Model: | WP40,50,60,70,80,100,120,135,155,175,200,250 |
| Ratio: | 1:10,15,20,25,30,40,50,60 |
| Color: | Green Or Customer Request |
| Noise: | low noise (<50DB) |
| Advantage: | Efficient and safe operating |
|
Material: |
Housing:Cast iron and Copper alloy |
| Worm Gear-Bronze 9-4# | |
| Worm with carburizing and quenching, surface harness is 56-62HRC | |
| Shaft-chromium steel-45# | |
| Packing: | Carton and Wooden Case |
| Bearing: | C&U Bearing |
| Seal: | NAK SKF |
| Certificate: | ISO9001,CE,3C,OEM |
| Warranty: | 12 months |
| Input Power: | 0.06kw, 0.09kw, 0.12kw, 0.18kw, 0.25kw, 0.37kw, 0.55kw, 0.75kw, 1.1kw, 1.5kw, 2.2kw, 3kw, 4kw, 5.5kw, 7.5kw, 11kw, 15kw |
| Usages: | Industrial Machine: Food Stuff, Ceramics,CHEMICAL,Packing,Dyeing, Woodworking,Glass. |
| IEC Flange: | 56B5, 56B14, 63B5, 63B14, 71B5, 71B14, 80B5, 80B14, 90B5, 90B14, 100B5, 100B14, 112B5, 112B14, 132B5, 160B5 |
| Lubricant: | Synthetic & Mineral |
Is a worm gear reducer gearbox right for your application?
If you’re interested in gear reduction and wondering if a worm gear reducer gearbox is right for your application, you’ve come to the right place. This gear reducer gearbox is efficient and compact. In addition, it has small clearances and is easy to install. Let’s take a closer look.
This is a reducer gearbox
Worm reducer gearbox is a type of reduction gear used in machinery. This gear reduces the output speed by changing the ratio of input to output. Gears come in a wide range of sizes and can be made from a variety of materials, including aluminum, cast iron, and stainless steel. Its efficiency depends on the ratio and size of the gears. It is usually used in low speed applications. But it can also be used as an auxiliary braking device for high-speed moving machinery.
When choosing a reduction gear, it’s important to look for models with multiple teeth. Ideally, it will have more teeth than the corresponding sprocket. This will reduce the noise produced by the gears. The maximum number of teeth of the worm gear should be greater than 40.
Worm gears produce less noise and vibration than conventional gears. Also, they are cheaper and smaller than other types of reduction gears. However, worm gears have some limitations that make them less efficient than other types. For example, they do not perform as efficiently as parallel or orthogonal axes, which are much better at transmitting power.
The main disadvantage of worm gears is the difficulty of lubrication. Worm gear reducer gearboxes require more lubrication due to the helical motion of the gears. This means it is less efficient and more prone to wear than a standard gearbox. Helical motion has problems transmitting power and causes sliding friction, also known as sliding wear.
A worm reducer gearbox is a reduction gearbox used to decelerate a high-speed motor to a low-speed output. Worm gear reducer gearboxes produce lower output speeds while maintaining high torque. Its gears are made of bronze or stainless steel and have a right-angle output. The gears are very small compared to other reducer gearboxes, so they can be used in tight spaces and applications where space is limited.
Worm gear reducer gearboxes are an excellent choice for applications requiring high torque and low speeds. These reducer gearboxes are compact, durable and have a long service life. These gearboxes are also compatible with solid and hollow output shafts. This feature eliminates the need for chains or belts, reducing the number of moving parts. Plus, they’re easy to maintain, which means they’re an excellent choice for a variety of applications.
Worm gear reducer gearboxes are also compact, versatile and easy to install. The worm gear itself is made from a single piece of alloy steel. It has a high helix angle and is case hardened and ground for durability. Its six AF hex sockets are designed for easy installation and a wide range of ratios. Worm gear reducer gearboxes are also suitable for manual operation. They are easy to install, compact in design and compatible with a wide range of motors and drives.
Worm reducer gearboxes are often used in industrial settings where a small amount of torque is required to move large objects. They are also useful when space is at a premium. They are compact and easy to install in tight spaces. Worm gears reduce the risk of tripping and are often made of durable materials, making them a popular choice.
Compared with planetary gearboxes, worm gear reducer gearboxes have many advantages. They are quiet, produce less noise, and are more comfortable to use. They are also more energy efficient than their planetary counterparts. Furthermore, they can be combined with other gearboxes and trains to increase their output efficiency.
It is high efficiency
When a worm reducer gearbox is used in a gear-motor, it is critical to note that it is extremely high in efficiency. This type of reducer gearbox is typically much hotter than a hypoid reducer gearbox, which reduces the service life of the gear. The increased thermal stress on the sliding gears results in premature seal wear and leakage. Furthermore, excessive heat causes lubrication to break down and can cause contamination. Helical gear reducer gearboxes are significantly cooler and have a low-maintenance design. Consequently, they can reduce factory downtime and energy costs.
A servo-worm reducer gearbox is an excellent choice for applications requiring high performance, repeatability, and precision positioning. These gear reducer gearboxes have been specifically designed for use with servo motor technology, which provides tight integration of the gear motor. Other advantages of a servo-worm reducer gearbox include reduced angular backlash and longer life.
Hypoid gearmotors offer increased efficiency and allow smaller motors to be used. A 1 HP worm reducer gearbox can produce the same amount of output as a 1/2 HP hypoid reducer gearbox. A Agknx study compared the two types of reducer gearboxes, comparing power, torque, and efficiency. As a result, a 1/2 HP hypoid gearmotor is much cheaper to operate than a 1 HP worm reducer gearbox.
The efficiency of a worm gear reducer gearbox depends on many factors, including the mesh of the gears and losses in the bearings and oil seal lips. The speed and load of the reducer gearbox also have an impact on its efficiency. As a result, worm gear reducer gearboxes should be used with the right type of lubricant.
In a worm gear reducer gearbox, a non-intersecting shaft rotates against a gear, while the output worm gear rotates in a perpendicular direction. This arrangement produces high efficiency while reducing the noise and vibration of the gear motor. This gear reducer gearbox is also quiet and has a low friction coefficient.
It has a low clearance
Worm reducer gearboxes are typically designed with a low clearance, meaning that the worm is not allowed to touch the wheels in the gear arrangement. The lubricant used depends on the size of the gearing, and it is usually ISO 680 or ISO 460. Higher viscosities require special equipment.
Worm gears are popular in machines that need to stop quickly, such as lifts and elevators. The gears and worm are made of a soft material, minimizing backlash and failure rates. They are also popular in heavy-duty machines, such as rock crushers. But while this is an important aspect of their design, there are other factors to consider when choosing a worm gear.
Worm gears have multiple teeth, which allows for greater surface area contact and a better distribution of load. This feature allows for high transmission ratios without sacrificing power. Worm gears can be paired with other gearboxes to increase the overall efficiency of the system.
Worm gears are often used in heavy machinery, including trucks barreling down a deserted highway. They can also be found in packaging machinery, conveyors, and other small machinery. Their unique shape makes them ideal for tight spaces. But they also tend to wear and tear much faster than conventional gears.
It has a high torque to weight ratio
The worm gear reducer gearbox is a versatile gear train that provides a high torque-to-weight ratio. These reducer gearboxes are typically used in applications that require high torque and high gear ratios, such as machine tools. They also have a very compact design, enabling very high gear ratios at low speeds.
Worm gear reducer gearboxes are very quiet, mainly because the input and output shafts are perpendicular to each other. Their low noise level is an advantage compared to planetary gearboxes. Compared with planetary reducer gearboxes, worm gear reducer gearboxes are also relatively cheap.
The worm gear consists of two parts: the helical butt-jointed worm gear and the worm. The screw-butted worm gear is connected to the shaft by a helical thread. The worm gear is a variation of the six-simple machine. The worm is located in the worm wheel, which forces the worm to rotate. It also changes the plane of motion. Worm gears are usually made of steel or brass.
Worm gear reducer gearboxes are one of the most popular types of reducer gearboxes. It provides high torque and high speed ratio in a compact package. These reducer gearboxes are used in many power transmission systems, including elevators, safety gates, conveyor belts, and medical testing equipment.
Worm reducer gearboxes come in a variety of shapes and sizes, including parallel shaft reducer gearboxes and planetary worm reducer gearboxes. They have a high torque-to-weight ratio and are easy to maintain. They are also lightweight and relatively easy to install. This makes them an excellent choice for many applications.
Worms can be assembled using stepped shafts, set screws or dowel pins. However, the worm is subject to a lot of thrust and must be held firmly. This could lead to a rebound. Also, the bearings may come loose and the worm may move. To avoid backlash, make sure the worm gear shaft passes through the midpoint of the worm face width.
editor by czh 2023-01-05
